diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/PinNames.h b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/PinNames.h
index aa912fba41a..2f9f84c09cd 100644
--- a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/PinNames.h
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/PinNames.h
@@ -82,10 +82,17 @@ typedef enum {
     // Cellular modem (a DCE)
     MDMPWRON  = PE_14,   // Power (active high)
     MDMRST    = PB_5,    // Reset (active low)
+#if defined(TARGET_UBLOX_C030_R410M)
+    MDMTXD    = PA_9,    // Transmit Data
+    MDMRXD    = PA_10,    // Receive Data
+    MDMCTS    = PA_11,    // Clear to Send
+    MDMRTS    = PA_12,    // Request to Send
+#else
     MDMTXD    = PD_5,    // Transmit Data
     MDMRXD    = PD_6,    // Receive Data
     MDMCTS    = PD_3,    // Clear to Send
     MDMRTS    = PD_4,    // Request to Send
+#endif
     MDMDCD    = NC,      // DCD line not connected
     MDMDSR    = NC,      // DSR line not connected
     MDMDTR    = NC,      // DTR line not connected
@@ -148,13 +155,21 @@ typedef enum {
     // STDIO for console print
 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
     STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+#if defined(TARGET_UBLOX_C030_R410M)
+    STDIO_UART_TX = PD_5,
 #else
     STDIO_UART_TX = PA_9,
 #endif
+#endif
 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
     STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+#if defined(TARGET_UBLOX_C030_R410M)
+    STDIO_UART_RX = PD_6,
 #else
     STDIO_UART_RX = PA_10,
+#endif	
 #endif
 
     // ST-Link
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/onboard_modem_api.c b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/onboard_modem_api.c
index 30b7389bdfc..6689308b01a 100644
--- a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/onboard_modem_api.c
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/onboard_modem_api.c
@@ -28,7 +28,12 @@ static void press_power_button(int time_us)
 {
     gpio_t gpio;
 
+#if defined(TARGET_UBLOX_C030_R410M)
+    gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrain, 0);
+#else
     gpio_init_out_ex(&gpio, MDMPWRON, 0);
+#endif
+
     wait_us(time_us);
     gpio_write(&gpio, 1);
 }
@@ -51,16 +56,27 @@ void onboard_modem_deinit()
 
 void onboard_modem_power_up()
 {
-    /* keep the power line low for 50 microseconds */
+#if defined(TARGET_UBLOX_C030_R410M)
+	/* keep the power line low for 1 seconds */
+    press_power_button(1000000);
+#else
+	/* keep the power line low for 50 microseconds */
     press_power_button(50);
+#endif
+
     /* give modem a little time to respond */
     wait_ms(100);
 }
 
 void onboard_modem_power_down()
 {
-    /* keep the power line low for 1 second */
+#if defined(TARGET_UBLOX_C030_R410M)
+	/* keep the power line low for 1.5 seconds */
+    press_power_button(1500000);
+#else
+	/* keep the power line low for 1 seconds */
     press_power_button(1000000);
+#endif
 }
 
 #endif //MODEM_ON_BOARD
diff --git a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/ublox_low_level_api.c b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/ublox_low_level_api.c
index 59a5805b9d5..d2b01c7c6b3 100644
--- a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/ublox_low_level_api.c
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/ublox_low_level_api.c
@@ -26,12 +26,18 @@ void ublox_board_init(void) {
     
     // start with modem disabled 
     gpio_init_out_ex(&gpio, MDMRST,    0);
+#if defined(TARGET_UBLOX_C030_R410M)
+    gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrain, 1);
+#else
     gpio_init_out_ex(&gpio, MDMPWRON,  0);
+#endif
     gpio_init_out_ex(&gpio, MDMRTS,    0);
     gpio_init_in_ex(&gpio,  MDMCURRENTSENSE, PullNone);
 
-    // start with GNSS disabled
+#if !defined (TARGET_UBLOX_C030_R410M)
+    // start with GNSS disabled, this is ONLY TEMPORARY and that once the HW issue with the GNSSEN pin on the R410M board is resolved then this line will become default for all platforms.
     gpio_init_inout(&gpio,  GNSSEN,  PIN_OUTPUT, PushPullNoPull, 0);
+#endif
 
     // power on SD card
     gpio_init_out_ex(&gpio, SDPWRON,   1);
diff --git a/targets/targets.json b/targets/targets.json
index 1561c94a7cd..da46b3125c9 100644
--- a/targets/targets.json
+++ b/targets/targets.json
@@ -2122,6 +2122,10 @@
         "inherits": ["UBLOX_C030"],
         "release_versions": ["5"]
     },
+    "UBLOX_C030_R410M": {
+        "inherits": ["UBLOX_C030"],
+        "release_versions": ["5"]
+    },
     "NZ32_SC151": {
         "inherits": ["FAMILY_STM32"],
         "core": "Cortex-M3",