diff --git a/libraries/Matter/examples/matter_temp_sensor_sleep/matter_temp_sensor_sleep.ino b/libraries/Matter/examples/matter_temp_sensor_sleep/matter_temp_sensor_sleep.ino
new file mode 100644
index 0000000..b4a2515
--- /dev/null
+++ b/libraries/Matter/examples/matter_temp_sensor_sleep/matter_temp_sensor_sleep.ino
@@ -0,0 +1,66 @@
+/*
+   Matter sleep mode temperature sensor example
+
+   The example shows how to create a sleep mode temperature sensor with the Arduino Matter API.
+
+   The example creates a Matter temperature sensor device and publishes the current CPU temperature through it.
+   It goes to sleep mode for 10 minutes.
+   The device has to be commissioned to a Matter hub first.
+
+   Compatible boards:
+   - Arduino Nano Matter
+   - SparkFun Thing Plus MGM240P
+   - xG24 Explorer Kit
+   - xG24 Dev Kit
+   - Seeed Studio XIAO MG24 (Sense)
+
+   Author: Tamas Jozsi (Silicon Labs)
+ */
+#include <Matter.h>
+#include <MatterTemperature.h>
+#include "ArduinoLowPower.h"
+
+MatterTemperature matter_temp_sensor;
+
+void setup()
+{
+  Serial.begin(115200);
+  Matter.begin();
+  matter_temp_sensor.begin();
+
+  Serial.println("Matter temperature sensor");
+
+  if (!Matter.isDeviceCommissioned()) {
+    Serial.println("Matter device is not commissioned");
+    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+    Serial.printf("Manual pairing code: %s\n", Matter.getManualPairingCode().c_str());
+    Serial.printf("QR code URL: %s\n", Matter.getOnboardingQRCodeUrl().c_str());
+  }
+  while (!Matter.isDeviceCommissioned()) {
+    delay(200);
+  }
+
+  Serial.println("Waiting for Thread network...");
+  while (!Matter.isDeviceThreadConnected()) {
+    delay(200);
+  }
+  Serial.println("Connected to Thread network");
+
+  Serial.println("Waiting for Matter device discovery...");
+  while (!matter_temp_sensor.is_online()) {
+    delay(200);
+  }
+  Serial.println("Matter device is now online");
+}
+
+void loop()
+{
+  // Delay to operate after sleep mode exit
+  delay(1000);
+  float current_cpu_temp = getCPUTemp();
+  matter_temp_sensor.set_measured_value_celsius(current_cpu_temp);
+  Serial.printf("Current CPU temperature: %.02f C\n", current_cpu_temp);
+  delay(2000);
+  // Going to sleep mode for 10 minutes (600 s = 600.000 ms)
+  LowPower.sleep(600000);
+}