diff --git a/hw/drivers/display/lcd_itf/itf_i2c/pkg.yml b/hw/drivers/display/lcd_itf/itf_i2c/pkg.yml
new file mode 100644
index 0000000000..e3e20384cd
--- /dev/null
+++ b/hw/drivers/display/lcd_itf/itf_i2c/pkg.yml
@@ -0,0 +1,29 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+pkg.name: hw/drivers/display/lcd_itf/itf_i2c
+pkg.description: LCD Standard I2C interface
+pkg.keywords:
+    - display
+
+pkg.apis:
+    - lcd_interface
+
+pkg.deps:
+#    - "@apache-mynewt-core/hw/bus/drivers/i2c_common"
diff --git a/hw/drivers/display/lcd_itf/itf_i2c/src/itf_i2c.c b/hw/drivers/display/lcd_itf/itf_i2c/src/itf_i2c.c
new file mode 100644
index 0000000000..b98457b844
--- /dev/null
+++ b/hw/drivers/display/lcd_itf/itf_i2c/src/itf_i2c.c
@@ -0,0 +1,96 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+#include <bsp/bsp.h>
+#if MYNEWT_PKG_apache_mynewt_core__hw_bus_drivers_i2c_common
+#include <bus/drivers/i2c_common.h>
+#else
+#include <hal/hal_i2c.h>
+#endif
+
+#include <lv_conf.h>
+#include <lcd_itf.h>
+
+#if MYNEWT_PKG_apache_mynewt_core__hw_bus_drivers_i2c_common
+static struct bus_i2c_node lcd;
+static struct bus_i2c_node_cfg lcd_i2c_cfg = {
+    .node_cfg.bus_name = MYNEWT_VAL(LCD_I2C_DEV_NAME),
+    .addr = MYNEWT_VAL(LCD_I2C_ADDR),
+    .freq = MYNEWT_VAL(LCD_I2C_FREQ),
+};
+static struct os_dev *lcd_dev;
+#else
+#endif
+
+void
+lcd_itf_write_color_data(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, void *pixels)
+{
+    uint8_t *color_data = pixels;
+    size_t size = ((x2 - x1 + 1) * (y2 - y1 + 1)) >> 3;
+
+#if MYNEWT_PKG_apache_mynewt_core__hw_bus_drivers_i2c_common
+    color_data[-1] = 0x40;
+    bus_node_write(lcd_dev, color_data - 1, size + 1, 1000, 0);
+#else
+    color_data[-1] = 0x40;
+    struct hal_i2c_master_data data = {
+            .address = MYNEWT_VAL(LCD_I2C_ADDR),
+            .buffer = color_data - 1,
+            .len = size + 1,
+    };
+    hal_i2c_master_write(0, &data, 1000, 1);
+#endif
+}
+
+void
+lcd_ift_write_cmd(const uint8_t *cmd, int cmd_length)
+{
+    uint8_t buf[cmd_length + 1];
+
+    buf[0] = 0;
+    for (int i = 0; i < cmd_length; ++i) {
+        buf[i + 1] = cmd[i];
+    }
+#if MYNEWT_PKG_apache_mynewt_core__hw_bus_drivers_i2c_common
+    bus_node_write(lcd_dev, buf, cmd_length + 1, 1000, 0);
+#else
+    struct hal_i2c_master_data data = {
+            .address = MYNEWT_VAL(LCD_I2C_ADDR),
+            .buffer = buf,
+            .len = cmd_length + 1,
+    };
+    hal_i2c_master_write(0, &data, 1000, 1);
+#endif
+}
+
+
+void
+lcd_itf_init(void)
+{
+#if MYNEWT_PKG_apache_mynewt_core__hw_bus_drivers_i2c_common
+    int rc;
+    struct bus_node_callbacks cbs = {};
+
+    bus_node_set_callbacks((struct os_dev *)&lcd, &cbs);
+
+    rc = bus_i2c_node_create("display", &lcd, &lcd_i2c_cfg, NULL);
+    assert(rc == 0);
+    lcd_dev = os_dev_open("display", 0, NULL);
+#endif
+}
diff --git a/hw/drivers/display/lcd_itf/itf_i2c/syscfg.yml b/hw/drivers/display/lcd_itf/itf_i2c/syscfg.yml
new file mode 100644
index 0000000000..68baf072b9
--- /dev/null
+++ b/hw/drivers/display/lcd_itf/itf_i2c/syscfg.yml
@@ -0,0 +1,34 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+syscfg.defs:
+    LCD_I2C_DEV_NAME:
+        description: I2C device name that LCD is connected to.
+        value: '"i2c0"'
+    LCD_I2C_ADDR:
+        description: LCD I2C address.
+        value:
+        restriction: $notnull
+    LCD_I2C_FREQ:
+        description: I2C device frequency for LCD (typical 100/400 kHz)
+        value: 100
+    LCD_I2C_MAX_TRANSFER:
+        description: Maximum nuber of bytes that I2C interface supports
+        value:
+
+syscfg.restrictions:
diff --git a/hw/drivers/display/lcd_itf/pkg.yml b/hw/drivers/display/lcd_itf/pkg.yml
index 006dd9b2b8..809d26927e 100644
--- a/hw/drivers/display/lcd_itf/pkg.yml
+++ b/hw/drivers/display/lcd_itf/pkg.yml
@@ -28,6 +28,8 @@ pkg.req_apis:
 
 pkg.deps.'LCD_ITF == "spi"':
     - "@apache-mynewt-core/hw/drivers/display/lcd_itf/itf_spi"
+pkg.deps.'LCD_ITF == "i2c"':
+    - "@apache-mynewt-core/hw/drivers/display/lcd_itf/itf_i2c"
 pkg.deps.'LCD_ITF == "8080_II_8_bit"':
     - "@apache-mynewt-core/hw/drivers/display/lcd_itf/itf_8080"
 pkg.deps.'LCD_ITF == "8080_II_16_bit"':
diff --git a/hw/drivers/display/lcd_itf/syscfg.yml b/hw/drivers/display/lcd_itf/syscfg.yml
index 4fed89ea4f..973a09232d 100644
--- a/hw/drivers/display/lcd_itf/syscfg.yml
+++ b/hw/drivers/display/lcd_itf/syscfg.yml
@@ -23,6 +23,7 @@ syscfg.defs:
         choices:
             - custom
             - spi
+            - i2c
             - 8080_II_8_bit
             - 8080_II_16_bit
         value: spi
diff --git a/hw/drivers/display/lvgl/oled/ssd1306/pkg.yml b/hw/drivers/display/lvgl/oled/ssd1306/pkg.yml
new file mode 100644
index 0000000000..33f7aa2770
--- /dev/null
+++ b/hw/drivers/display/lvgl/oled/ssd1306/pkg.yml
@@ -0,0 +1,28 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+pkg.name: hw/drivers/display/lvgl/oled/ssd1306
+pkg.description: LVGL display driver for SSD1306
+pkg.author: "Apache Mynewt <dev@mynewt.apache.org>"
+pkg.homepage: "http://mynewt.apache.org/"
+pkg.keywords:
+
+pkg.cflags:
+
+pkg.deps:
+    - "@apache-mynewt-core/hw/drivers/display/lcd_itf"
diff --git a/hw/drivers/display/lvgl/oled/ssd1306/src/ssd1306.c b/hw/drivers/display/lvgl/oled/ssd1306/src/ssd1306.c
new file mode 100644
index 0000000000..e6ddaf9236
--- /dev/null
+++ b/hw/drivers/display/lvgl/oled/ssd1306/src/ssd1306.c
@@ -0,0 +1,240 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+#include <bsp/bsp.h>
+#include <hal/lv_hal_disp.h>
+#include <hal/hal_gpio.h>
+#include <lcd_itf.h>
+
+/*
+ * Fundamental Command Table
+ */
+#define SSD1306_SET_LOWER_COL_ADDRESS           0x00
+#define SSD1306_SET_LOWER_COL_ADDRESS_MASK      0x0f
+
+#define SSD1306_SET_HIGHER_COL_ADDRESS          0x10
+#define SSD1306_SET_HIGHER_COL_ADDRESS_MASK     0x0f
+
+#define SSD1306_SET_MEM_ADDRESSING_MODE         0x20
+#define SSD1306_SET_MEM_ADDRESSING_HORIZONTAL   0x00
+#define SSD1306_SET_MEM_ADDRESSING_VERTICAL     0x01
+#define SSD1306_SET_MEM_ADDRESSING_PAGE         0x02
+
+#define SSD1306_SET_COLUMN_ADDRESS              0x21
+
+#define SSD1306_SET_PAGE_ADDRESS                0x22
+
+#define SSD1306_HORIZONTAL_SCROLL_SETUP         0x26
+
+#define SSD1306_CONTINUOUS_VERTICAL_AND_HORIZONTAL_SCROLL_SETUP     0x29
+
+#define SSD1306_DEACTIVATE_SCROLL               0x2e
+
+#define SSD1306_ACTIVATE_SCROLL                 0x2f
+
+#define SSD1306_SET_START_LINE                  0x40
+#define SSD1306_SET_START_LINE_MASK             0x3f
+
+#define SSD1306_SET_CONTRAST_CTRL               0x81
+
+#define SDD1406_CHARGE_PUMP_SETTING             0x8d
+#define SDD1406_CHARGE_PUMP_SETTING_DISABLE     0x10
+#define SDD1406_CHARGE_PUMP_SETTING_ENABLE      0x14
+
+#define SSD1306_SET_SEGMENT_MAP_NORMAL          0xa0
+#define SSD1306_SET_SEGMENT_MAP_REMAPED         0xa1
+
+#define SSD1306_SET_VERTICAL_SCROLL_AREA        0xa3
+
+#define SSD1306_SET_ENTIRE_DISPLAY_OFF          0xa4
+#define SSD1306_SET_ENTIRE_DISPLAY_ON           0xa5
+
+#define SSD1306_SET_NORMAL_DISPLAY              0xa6
+#define SSD1306_SET_REVERSE_DISPLAY             0xa7
+
+#define SSD1306_SET_MULTIPLEX_RATIO             0xa8
+
+#define SSD1306_DISPLAY_OFF                     0xae
+#define SSD1306_DISPLAY_ON                      0xaf
+
+#define SSD1306_SET_PAGE_START_ADDRESS          0xb0
+#define SSD1306_SET_PAGE_START_ADDRESS_MASK     0x07
+
+#define SSD1306_SET_COM_OUTPUT_SCAN_NORMAL      0xc0
+#define SSD1306_SET_COM_OUTPUT_SCAN_FLIPPED     0xc8
+
+#define SSD1306_SET_DISPLAY_OFFSET              0xd3
+
+#define SSD1306_SET_CLOCK_DIV_RATIO             0xd5
+
+#define SSD1306_SET_CHARGE_PERIOD               0xd9
+
+#define SSD1306_SET_PADS_HW_CONFIG              0xda
+
+#define SSD1306_SET_VCOM_DESELECT_LEVEL         0xdb
+
+#define SSD1306_NOP                             0xe3
+
+#define SSD1306_SET_PADS_HW_SEQUENTIAL          0x02
+#define SSD1306_SET_PADS_HW_ALTERNATIVE         0x12
+
+#define SSD1306_SET_CHARGE_PUMP_ON              0x8d
+#define SSD1306_SET_CHARGE_PUMP_ON_DISABLED     0x10
+#define SSD1306_SET_CHARGE_PUMP_ON_ENABLED      0x14
+
+#define SH1106_SET_DCDC_MODE                    0xad
+#define SH1106_SET_DCDC_DISABLED                0x8a
+#define SH1106_SET_DCDC_ENABLED                 0x8b
+
+#define SSD1306_SET_PUMP_VOLTAGE_64             0x30
+#define SSD1306_SET_PUMP_VOLTAGE_74             0x31
+#define SSD1306_SET_PUMP_VOLTAGE_80             0x32
+#define SSD1306_SET_PUMP_VOLTAGE_90             0x33
+
+#define SSD1306_READ_MODIFY_WRITE_START         0xe0
+#define SSD1306_READ_MODIFY_WRITE_END           0xee
+
+#define SSD1306_CLOCK_DIV_RATIO                 0x0
+#define SSD1306_CLOCK_FREQUENCY                 0x8
+#define SSD1306_PANEL_VCOM_DESEL_LEVEL          0x20
+#define SSD1306_PANEL_PUMP_VOLTAGE              SSD1306_SET_PUMP_VOLTAGE_90
+
+#if MYNEWT_VAL_CHOICE(SSD1306_ADDRESSING_MODE, horizontal)
+#define ADDRESSING_MODE SSD1306_SET_MEM_ADDRESSING_HORIZONTAL
+#else
+#define ADDRESSING_MODE SSD1306_SET_MEM_ADDRESSING_PAGE
+#endif
+
+LCD_SEQUENCE(init_cmds)
+    LCD_SEQUENCE_LCD_CS_INACTIVATE(),
+    LCD_SEQUENCE_LCD_DC_DATA(),
+    /* command length, command, args */
+    1, SSD1306_DISPLAY_OFF,
+    2, SSD1306_SET_CLOCK_DIV_RATIO, (SSD1306_CLOCK_FREQUENCY << 4) | SSD1306_CLOCK_DIV_RATIO,
+    2, SSD1306_SET_MULTIPLEX_RATIO, 0x3f,
+    2, SSD1306_SET_DISPLAY_OFFSET, 0,
+    1, SSD1306_SET_START_LINE + 0,
+    2, SDD1406_CHARGE_PUMP_SETTING, SDD1406_CHARGE_PUMP_SETTING_ENABLE,
+    2, SSD1306_SET_MEM_ADDRESSING_MODE, ADDRESSING_MODE,
+    1, SSD1306_SET_SEGMENT_MAP_REMAPED,
+    1, SSD1306_SET_COM_OUTPUT_SCAN_FLIPPED,
+
+    2, SSD1306_SET_PADS_HW_CONFIG, 0x12,
+    2, SSD1306_SET_CONTRAST_CTRL, 0xcf,
+
+    2, SSD1306_SET_CHARGE_PERIOD, 0xF1,
+
+    2, SSD1306_SET_VCOM_DESELECT_LEVEL, 0x40,
+
+    1, SSD1306_DEACTIVATE_SCROLL,
+
+    1, SSD1306_SET_ENTIRE_DISPLAY_OFF,
+    1, SSD1306_SET_NORMAL_DISPLAY,
+    1, SSD1306_SET_START_LINE + 0,
+
+    3, SSD1306_SET_HIGHER_COL_ADDRESS, 0, 0xb0,
+
+    1, SSD1306_DISPLAY_ON,
+LCD_SEQUENCE_END
+
+/**
+ * Initialize the SSD1306 display controller
+ */
+void
+ssd1306_init(lv_disp_drv_t *driver)
+{
+    lcd_command_sequence(init_cmds);
+}
+
+#if MYNEWT_VAL_CHOICE(SSD1306_ADDRESSING_MODE, horizontal)
+void
+ssd1306_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint8_t page1 = area->y1 >> 3;
+    uint8_t page2 = area->y2 >> 3;
+    uint8_t *buf = (uint8_t *)color_p;
+    uint8_t b[3];
+
+    b[0] = SSD1306_SET_COLUMN_ADDRESS;
+    b[1] = (uint8_t)area->x1;
+    b[2] = (uint8_t)area->x2;
+    lcd_ift_write_cmd(b, 3);
+
+    b[0] = SSD1306_SET_PAGE_ADDRESS;
+    b[1] = page1;
+    b[2] = page2;
+    lcd_ift_write_cmd(b, 3);
+
+    lcd_itf_write_color_data(area->x1, area->y1, area->x2, area->y2, buf);
+
+    lv_disp_flush_ready(drv);
+}
+#else
+void
+ssd1306_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint8_t page1 = area->y1 >> 3;
+    uint8_t page2 = area->y2 >> 3;
+
+    uint8_t *buf = (uint8_t *)color_p;
+    int width = area->x2 - area->x1 + 1;
+    uint8_t b[3];
+
+    for (; page1 <= page2; ++page1, buf += width) {
+        b[0] = SSD1306_SET_PAGE_START_ADDRESS + page1;
+        lcd_ift_write_cmd(b, 1);
+        b[0] = SSD1306_SET_LOWER_COL_ADDRESS + (area->x1 & 0xF);
+        lcd_ift_write_cmd(b, 1);
+        b[0] = SSD1306_SET_HIGHER_COL_ADDRESS + ((area->x1 >> 4) & 0xF);
+        lcd_ift_write_cmd(b, 1);
+
+        lcd_itf_write_color_data(area->x1, area->x2, page1 << 3, ((page1 + 1) << 3) - 1, buf);
+    }
+    lv_disp_flush_ready(drv);
+}
+#endif
+
+void
+ssd1306_set_px_cb(struct _lv_disp_drv_t *disp_drv, uint8_t *buf, lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
+                  lv_color_t color, lv_opa_t opa)
+{
+    uint16_t byte_index = x + ((y >> 3) * buf_w);
+    uint8_t bit_index = y & 0x7;
+
+    if (color.full == 0) {
+        buf[byte_index] |= 1 << bit_index;
+    } else {
+        buf[byte_index] &= ~(1 << bit_index);
+    }
+}
+
+void
+mynewt_lv_drv_init(lv_disp_drv_t *driver)
+{
+    if (MYNEWT_VAL(LCD_RESET_PIN) >= 0) {
+        hal_gpio_init_out(MYNEWT_VAL(LCD_RESET_PIN), 1);
+    }
+    lcd_itf_init();
+    driver->flush_cb = ssd1306_flush;
+    driver->set_px_cb = ssd1306_set_px_cb;
+    driver->hor_res = MYNEWT_VAL(LVGL_DISPLAY_HORIZONTAL_RESOLUTION);
+    driver->ver_res = MYNEWT_VAL(LVGL_DISPLAY_VERTICAL_RESOLUTION);
+
+    ssd1306_init(driver);
+}
diff --git a/hw/drivers/display/lvgl/oled/ssd1306/syscfg.yml b/hw/drivers/display/lvgl/oled/ssd1306/syscfg.yml
new file mode 100644
index 0000000000..b33efc284b
--- /dev/null
+++ b/hw/drivers/display/lvgl/oled/ssd1306/syscfg.yml
@@ -0,0 +1,32 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+syscfg.defs:
+    SSD1306_ADDRESSING_MODE:
+        description: Addressing mode.
+        choices:
+            - horizontal
+            - page
+        value: horizontal
+
+syscfg.vals:
+    LVGL_DISPLAY_HORIZONTAL_RESOLUTION: 128
+    LVGL_DISPLAY_VERTICAL_RESOLUTION: 64
+
+syscfg.restrictions:
+    - LV_DISP_Y_ALIGN == 3
diff --git a/hw/drivers/display/lvgl/pkg.yml b/hw/drivers/display/lvgl/pkg.yml
index 10bc372b86..846b23da14 100644
--- a/hw/drivers/display/lvgl/pkg.yml
+++ b/hw/drivers/display/lvgl/pkg.yml
@@ -58,6 +58,8 @@ pkg.deps:
     - "@apache-mynewt-core/hw/hal"
     - "@apache-mynewt-core/hw/drivers/display/lcd_itf"
 
+pkg.deps.LVGL_SSD1306:
+    - "@apache-mynewt-core/hw/drivers/display/lvgl/oled/ssd1306"
 pkg.deps.LVGL_GC9A01:
     - "@apache-mynewt-core/hw/drivers/display/lvgl/tft/gc9a01"
 pkg.deps.LVGL_ILI9341:
diff --git a/hw/drivers/display/lvgl/syscfg.yml b/hw/drivers/display/lvgl/syscfg.yml
index 61ecf72cf9..3af9a62147 100644
--- a/hw/drivers/display/lvgl/syscfg.yml
+++ b/hw/drivers/display/lvgl/syscfg.yml
@@ -22,6 +22,9 @@ syscfg.defs:
             LV_COLOR_16_SWAP changes order of 16 bit RGB value to
             better match 8 bit SPI protocol.
         value: 0
+    LVGL_SSD1306:
+        description: Enable SSD1306 display driver.
+        value:
     LVGL_GC9A01:
         description: Enable GC9A01 display driver.
         value: