Merge pull request #9 from per1234/correct-architectures

Use correct library.properties architectures value

Author: facchinm

libraries/EEPROM/library.properties

@@ -6,5 +6,5 @@ sentence=Enables reading and writing to the permanent board storage.
 paragraph=This library allows to read and write data in a memory type, the EEPROM, that keeps its content also when the board is powered off. The amount of EEPROM available depends on the microcontroller type.
 category=Data Storage
 url=http://www.arduino.cc/en/Reference/EEPROM
-architectures=avr
+architectures=megaavr
 

libraries/HID/library.properties

@@ -6,4 +6,4 @@ sentence=Module for PluggableUSB infrastructure. Exposes an API for devices like
 paragraph=
 category=Communication
 url=http://www.arduino.cc/en/Reference/HID
-architectures=avr
+architectures=megaavr

libraries/SPI/library.properties

@@ -6,5 +6,5 @@ sentence=Enables the communication with devices that use the Serial Peripheral I
 paragraph=SPI is a synchronous serial data protocol used by microcontrollers for communicating with one or more peripheral devices quickly over short distances. It uses three lines common to all devices (MISO, MOSI and SCK) and one specific for each device.
 category=Communication
 url=http://www.arduino.cc/en/Reference/SPI
-architectures=avr
+architectures=megaavr
 

libraries/SoftwareSerial/library.properties

@@ -6,5 +6,5 @@ sentence=Enables serial communication on any digital pin.
 paragraph=The SoftwareSerial library has been developed to allow serial communication on any digital pin of the board, using software to replicate the functionality of the hardware UART. It is possible to have multiple software serial ports with speeds up to 115200 bps. 
 category=Communication
 url=http://www.arduino.cc/en/Reference/SoftwareSerial
-architectures=avr
+architectures=megaavr
 

libraries/Wire/library.properties

@@ -6,5 +6,5 @@ sentence=This library allows you to communicate with I2C and Two Wire Interface
 paragraph=It allows the communication with I2C devices like temperature sensors, realtime clocks and many others using SDA (Data Line) and SCL (Clock Line).
 category=Communication
 url=http://www.arduino.cc/en/Reference/Wire
-architectures=avr
+architectures=megaavr