WebClient.ino

/****************************************************************************************************************************
  WebClient.ino - Simple Arduino web server sample for ESP8266 AT-command shield
  For STM32 with built-in Ethernet LAN8742A (Nucleo-144, DISCOVERY, etc) or W5x00/ENC28J60 shield/module

  EthernetWebServer_STM32 is a library for the STM32 running Ethernet WebServer

  Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases
  Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer_STM32
  Licensed under MIT license
 *****************************************************************************************************************************/

#include "defines.h"

char server[] = "arduino.tips";

// Initialize the Web client object
EthernetClient client;

void setup()
{
  // Open serial communications and wait for port to open:
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  Serial.println("\nStart WebClient on " + String(BOARD_NAME) + ", using " + String(SHIELD_TYPE));

#if USE_ETHERNET_GENERIC
  Serial.println(ETHERNET_GENERIC_VERSION);
#endif

  Serial.println(ETHERNET_WEBSERVER_STM32_VERSION);

#if !(USE_BUILTIN_ETHERNET)
#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
  ET_LOGWARN(F("========================="));
#endif
#else
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
  ET_LOGWARN(F("========================="));
#endif
#endif

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET
  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  //Ethernet.init(USE_THIS_SS_PIN);

#endif  //( ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
#endif

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;
  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  Ethernet.begin(mac[index]);

  Serial.print(F("Connected! IP address: "));
  Serial.println(Ethernet.localIP());

  Serial.println();
  Serial.println(F("Starting connection to server..."));

  // if you get a connection, report back via serial
  if (client.connect(server, 80))
  {
    Serial.println(F("Connected to server"));
    // Make a HTTP request
    client.println(F("GET /asciilogo.txt HTTP/1.1"));
    client.println(F("Host: arduino.tips"));
    client.println(F("Connection: close"));
    client.println();
  }
}

void printoutData()
{
  // if there are incoming bytes available
  // from the server, read them and print them
  while (client.available())
  {
    char c = client.read();
    Serial.write(c);
  }

  Serial.flush();
}

void loop()
{
  printoutData();

  // if the server's disconnected, stop the client
  if (!client.connected())
  {
    Serial.println();
    Serial.println(F("Disconnecting from server..."));
    client.stop();

    // do nothing forevermore
    while (true);
  }
}