Parallelize bytecode compilation ✨

Bytecode compilation is slow. It's often one of the biggest contributors
to the install step's sluggishness. For better or worse, we can't really
enable --no-compile by default as it has the potential to render certain
workflows permanently slower in a subtle way.[^1]

To improve the situation, bytecode compilation can be parallelized
across a pool of processes (or sub-interpreters on Python 3.14). I've
observed a 1.1x to 3x improvement in install step times locally.[^2]

This patch has been written to be relatively comprehensible, but for
posterity, these are the high-level implementation notes:

- We can't use compileall.compile_dir() because it spins up a new worker
  pool on every invocation. If it's used as a "drop-in" replacement for
  compileall.compile_file(), then the pool creation overhead will be
  paid for every package installed. This is bad and kills most of the
  gains. Redesigning the installation logic to compile everything at the
  end was rejected for being too invasive (a key goal was to avoid
  affecting the package installation order).

- A bytecode compiler is created right before package installation
  starts and reused for all packages. Depending on platform and
  workload, either a serial (in-process) compiler or parallel compiler
  will be used. They both have the same interface, accepting a batch of
  Python filepaths to compile.

- This patch was designed to as low-risk as reasonably possible. pip
  does not contain any parallelized code, thus introducing any sort of
  parallelization poses a nontrivial risk. To minimize this risk, the
  only code parallelized is the bytecode compilation code itself (~10
  LOC). In addition, the package install order is unaffected and pip
  will fall back to serial compilation if parallelization is unsupported.

The criteria for parallelization are:

1. There are at least 2 CPUs available. The process CPU count is used
   if available, otherwise the system CPU count. If there is only one
   CPU, serial compilation will always be used because even a parallel
   compiler with one worker will add extra overhead.

2. The maximum amount of workers is at least 2. This is controlled by
   the --install-jobs option.[^3] It defaults to "auto" which uses the
   process/system CPU count.[^4]

3. There is "enough" code for parallelization to be "worth it". This
   criterion exists so pip won't waste (say) 100ms on spinning up a
   parallel compiler when compiling serially would only take 20ms.[^5]
   The limit is set to 1 MB of Python code. This is admittedly rather
   crude, but it seems to work well enough having tested on a variety of
   systems.

[^1]: Basically, if the Python files are installed to a read-only
      directory, then importing those files will be permanently slower
      as the .pyc files will never be cached. This is quite subtle,
      enough so that we can't really expect newbies to recognise and
      know how to address this (there is the PYTHONPYCACHEPREFIX
      envvar, but if you're advanced enough to use it, then you are
      also advanced enough to know when to use uv or pip's
      --no-compile).

[^2]: The 1.1x was on a painfully slow dual-core/HDD-equipped Windows
      install installing simply setuptools. The 3x was observed on my
      main 8-core Ryzen 5800HS Windows machine while installing pip's
      own test dependencies.

[^3]: Yes, this is probably not the best name, but adding an option for
      just bytecode compilation seems silly. Anyway, this will give us
      room if we ever parallelize more parts of the install step.

[^4]: Up to a hard-coded limit of 8 to avoid resource exhaustion. This
      number was chosen arbitrarily, but is definitely high enough to
      net a major improvement.

[^5]: This is important because I don't want to slow down tiny installs
      (e.g., pip install six ... or our own test suite). Creating a new
      process is prohibitively expensive on Windows (and to a lesser
      degree on macOS) for various reasons, so parallelization can't be
      simply used all of time.

Author: ichard26

news/13247.feature.rst

@@ -0,0 +1,4 @@
+Bytecode compilation is parallelized to significantly speed up installation of
+large/many packages. By default, the number of workers matches the available CPUs
+(up to a hard-coded limit), but can be adjusted using the ``--install-jobs``
+option. To disable parallelization, pass ``--install-jobs 1``.

src/pip/_internal/cli/cmdoptions.py

@@ -1070,6 +1070,39 @@ def check_list_path_option(options: Values) -> None:
 )
 
 
+def _handle_jobs(
+    option: Option, opt_str: str, value: str, parser: OptionParser
+) -> None:
+    if value == "auto":
+        setattr(parser.values, option.dest, "auto")
+        return
+
+    try:
+        if (count := int(value)) > 0:
+            setattr(parser.values, option.dest, count)
+            return
+    except ValueError:
+        pass
+
+    msg = "should be a positive integer or 'auto'"
+    raise_option_error(parser, option=option, msg=msg)
+
+
+install_jobs: Callable[..., Option] = partial(
+    Option,
+    "--install-jobs",
+    dest="install_jobs",
+    default="auto",
+    type=str,
+    action="callback",
+    callback=_handle_jobs,
+    help=(
+        "Maximum number of workers to use while installing packages. "
+        "To disable parallelization, pass 1. (default: %default)"
+    ),
+)
+
+
 ##########
 # groups #
 ##########

src/pip/_internal/commands/install.py

@@ -270,6 +270,8 @@ def add_options(self) -> None:
             ),
         )
 
+        self.cmd_opts.add_option(cmdoptions.install_jobs())
+
     @with_cleanup
     def run(self, options: Values, args: List[str]) -> int:
         if options.use_user_site and options.target_dir is not None:
@@ -465,6 +467,7 @@ def run(self, options: Values, args: List[str]) -> int:
                 use_user_site=options.use_user_site,
                 pycompile=options.compile,
                 progress_bar=options.progress_bar,
+                workers=options.install_jobs,
             )
 
             lib_locations = get_lib_location_guesses(

src/pip/_internal/operations/install/wheel.py

@@ -1,19 +1,15 @@
 """Support for installing and building the "wheel" binary package format."""
 
 import collections
-import compileall
 import contextlib
 import csv
-import importlib
 import logging
 import os.path
 import re
 import shutil
 import sys
-import warnings
 from base64 import urlsafe_b64encode
 from email.message import Message
-from io import StringIO
 from itertools import chain, filterfalse, starmap
 from typing import (
     IO,
@@ -51,6 +47,7 @@
 from pip._internal.models.scheme import SCHEME_KEYS, Scheme
 from pip._internal.utils.filesystem import adjacent_tmp_file, replace
 from pip._internal.utils.misc import ensure_dir, hash_file, partition
+from pip._internal.utils.pyc_compile import BytecodeCompiler
 from pip._internal.utils.unpacking import (
     current_umask,
     is_within_directory,
@@ -417,12 +414,12 @@ def make(
         return super().make(specification, options)
 
 
-def _install_wheel(  # noqa: C901, PLR0915 function is too long
+def _install_wheel(  # noqa: C901 function is too long
     name: str,
     wheel_zip: ZipFile,
     wheel_path: str,
     scheme: Scheme,
-    pycompile: bool = True,
+    pycompiler: Optional[BytecodeCompiler],
     warn_script_location: bool = True,
     direct_url: Optional[DirectUrl] = None,
     requested: bool = False,
@@ -601,25 +598,14 @@ def pyc_source_file_paths() -> Generator[str, None, None]:
                 continue
             yield full_installed_path
 
-    def pyc_output_path(path: str) -> str:
-        """Return the path the pyc file would have been written to."""
-        return importlib.util.cache_from_source(path)
-
     # Compile all of the pyc files for the installed files
-    if pycompile:
-        with contextlib.redirect_stdout(StringIO()) as stdout:
-            with warnings.catch_warnings():
-                warnings.filterwarnings("ignore")
-                for path in pyc_source_file_paths():
-                    success = compileall.compile_file(path, force=True, quiet=True)
-                    if success:
-                        pyc_path = pyc_output_path(path)
-                        assert os.path.exists(pyc_path)
-                        pyc_record_path = cast(
-                            "RecordPath", pyc_path.replace(os.path.sep, "/")
-                        )
-                        record_installed(pyc_record_path, pyc_path)
-        logger.debug(stdout.getvalue())
+    if pycompiler is not None:
+        for module in pycompiler(pyc_source_file_paths()):
+            if module.is_success:
+                pyc_record_path = module.pyc_path.replace(os.path.sep, "/")
+                record_installed(RecordPath(pyc_record_path), module.pyc_path)
+            if output := module.compile_output:
+                logger.debug(output)
 
     maker = PipScriptMaker(None, scheme.scripts)
 
@@ -718,7 +704,7 @@ def install_wheel(
     wheel_path: str,
     scheme: Scheme,
     req_description: str,
-    pycompile: bool = True,
+    pycompiler: Optional[BytecodeCompiler] = None,
     warn_script_location: bool = True,
     direct_url: Optional[DirectUrl] = None,
     requested: bool = False,
@@ -730,7 +716,7 @@ def install_wheel(
                 wheel_zip=z,
                 wheel_path=wheel_path,
                 scheme=scheme,
-                pycompile=pycompile,
+                pycompiler=pycompiler,
                 warn_script_location=warn_script_location,
                 direct_url=direct_url,
                 requested=requested,

src/pip/_internal/req/__init__.py

@@ -1,10 +1,14 @@
 import collections
 import logging
+from contextlib import nullcontext
 from dataclasses import dataclass
-from typing import Generator, List, Optional, Sequence, Tuple
+from functools import partial
+from typing import Generator, Iterable, List, Optional, Sequence, Tuple
+from zipfile import ZipFile
 
 from pip._internal.cli.progress_bars import get_install_progress_renderer
 from pip._internal.utils.logging import indent_log
+from pip._internal.utils.pyc_compile import WorkerSetting, create_bytecode_compiler
 
 from .req_file import parse_requirements
 from .req_install import InstallRequirement
@@ -33,6 +37,28 @@ def _validate_requirements(
         yield req.name, req
 
 
+def _does_python_size_surpass_threshold(
+    requirements: Iterable[InstallRequirement], threshold: int
+) -> bool:
+    """Inspect wheels to check whether there is enough .py code to
+    enable bytecode parallelization.
+    """
+    py_size = 0
+    for req in requirements:
+        if not req.local_file_path or not req.is_wheel:
+            # No wheel to inspect as this is a legacy editable.
+            continue
+
+        with ZipFile(req.local_file_path, allowZip64=True) as wheel_file:
+            for entry in wheel_file.infolist():
+                if entry.filename.endswith(".py"):
+                    py_size += entry.file_size
+                    if py_size > threshold:
+                        return True
+
+    return False
+
+
 def install_given_reqs(
     requirements: List[InstallRequirement],
     global_options: Sequence[str],
@@ -43,6 +69,7 @@ def install_given_reqs(
     use_user_site: bool,
     pycompile: bool,
     progress_bar: str,
+    workers: WorkerSetting,
 ) -> List[InstallationResult]:
     """
     Install everything in the given list.
@@ -68,7 +95,15 @@ def install_given_reqs(
         )
         items = renderer(items)
 
-    with indent_log():
+    if pycompile:
+        code_size_check = partial(
+            _does_python_size_surpass_threshold, to_install.values()
+        )
+        pycompiler = create_bytecode_compiler(workers, code_size_check)
+    else:
+        pycompiler = None
+
+    with indent_log(), pycompiler or nullcontext():
         for requirement in items:
             req_name = requirement.name
             assert req_name is not None
@@ -87,7 +122,7 @@ def install_given_reqs(
                     prefix=prefix,
                     warn_script_location=warn_script_location,
                     use_user_site=use_user_site,
-                    pycompile=pycompile,
+                    pycompiler=pycompiler,
                 )
             except Exception:
                 # if install did not succeed, rollback previous uninstall

src/pip/_internal/req/req_install.py

@@ -53,6 +53,7 @@
     redact_auth_from_url,
 )
 from pip._internal.utils.packaging import get_requirement
+from pip._internal.utils.pyc_compile import BytecodeCompiler
 from pip._internal.utils.subprocess import runner_with_spinner_message
 from pip._internal.utils.temp_dir import TempDirectory, tempdir_kinds
 from pip._internal.utils.unpacking import unpack_file
@@ -812,7 +813,7 @@ def install(
         prefix: Optional[str] = None,
         warn_script_location: bool = True,
         use_user_site: bool = False,
-        pycompile: bool = True,
+        pycompiler: Optional[BytecodeCompiler] = None,
     ) -> None:
         assert self.req is not None
         scheme = get_scheme(
@@ -869,7 +870,7 @@ def install(
             self.local_file_path,
             scheme=scheme,
             req_description=str(self.req),
-            pycompile=pycompile,
+            pycompiler=pycompiler,
             warn_script_location=warn_script_location,
             direct_url=self.download_info if self.is_direct else None,
             requested=self.user_supplied,