You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Linux raspberrypi 5.10.11-v7l+ #1399 SMP Thu Jan 28 12:09:48 GMT 2021 armv7l GNU/Linux
Revision : c03112
Serial : 10000000d7788c63
Model : Raspberry Pi 4 Model B Rev 1.2
Throttled flag : throttled=0x0
Camera : supported=0 detected=0
Videocore information
Jan 27 2021 22:19:57
Copyright (c) 2012 Broadcom
version 99d9a48302e4553cff3688692bb7e9ac760a03fa (clean) (release) (start)
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
After running apt upgrade to kernel 5.10.11, my PoE HAT fan no longer working
System Information
Raspberry Pi 4 Model B Rev 1.2
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
Raspberry Pi reference 2020-08-20
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 9a3a10bf1019ebb2d59053564dc6b90068bad27d, stage2
Linux raspberrypi 5.10.11-v7l+ #1399 SMP Thu Jan 28 12:09:48 GMT 2021 armv7l GNU/Linux
Revision : c03112
Serial : 10000000d7788c63
Model : Raspberry Pi 4 Model B Rev 1.2
Throttled flag : throttled=0x0
Camera : supported=0 detected=0
Videocore information
Jan 27 2021 22:19:57
Copyright (c) 2012 Broadcom
version 99d9a48302e4553cff3688692bb7e9ac760a03fa (clean) (release) (start)
alloc failures: 0
compactions: 0
legacy block fails: 0
Filesystem information
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 230542860 3625628 217520604 2% /
devtmpfs 1826956 0 1826956 0% /dev
tmpfs 1959052 1924 1957128 1% /dev/shm
tmpfs 1959052 8640 1950412 1% /run
tmpfs 5120 4 5116 1% /run/lock
tmpfs 1959052 0 1959052 0% /sys/fs/cgroup
/dev/sda1 258095 48680 209415 19% /boot
tmpfs 391808 0 391808 0% /run/user/999
tmpfs 391808 0 391808 0% /run/user/1000
Filename Type Size Used Priority
/var/swap file 102396 0 -2
Package version information
raspberrypi-ui-mods:
Installed: (none)
raspberrypi-sys-mods:
Installed: 20210125
openbox:
Installed: (none)
lxpanel:
Installed: (none)
pcmanfm:
Installed: (none)
rpd-plym-splash:
Installed: (none)
Networking Information
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 116829 bytes 28027664 (26.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 39133 bytes 3910513 (3.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 2027 bytes 139763 (136.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2027 bytes 139763 (136.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
USB Information
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
config.txt
arm_freq=1500
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=2
enable_gic=1
enable_uart=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=1024
mask_gpu_interrupt1=0x10000
max_framebuffers=2
over_voltage_avs=-42500
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
decode_MPG2=0x99ecc0ba,0x19a8893b
decode_WVC1=0x85cab6ed,0xfb2d2345
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=
cmdline.txt
coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:75:1A:FB vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=97c11cc0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
raspi-gpio settings
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=4 alt=0 func=TXD0 pull=NONE
GPIO 15: level=1 fsel=4 alt=0 func=RXD0 pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=1 fsel=0 func=INPUT pull=UP
GPIO 31: level=1 fsel=0 func=INPUT pull=NONE
GPIO 32: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 33: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 34: level=1 fsel=0 func=INPUT pull=UP
GPIO 35: level=1 fsel=0 func=INPUT pull=UP
GPIO 36: level=1 fsel=0 func=INPUT pull=UP
GPIO 37: level=1 fsel=0 func=INPUT pull=UP
GPIO 38: level=1 fsel=0 func=INPUT pull=UP
GPIO 39: level=1 fsel=0 func=INPUT pull=UP
GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
vcdbg log messages
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
debug_sym: vc_mem_copy: Unable to open '/dev/fb0': No such file or directory(2)
006595.742: brfs: File read: /mfs/sd/config.txt
006596.716: brfs: File read: 2253 bytes
006660.789: brfs: File read: /mfs/sd/config.txt
006677.220: brfs: File read: 2253 bytes
007156.685: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
007159.182: *** Restart logging
007163.076: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
007166.507: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
007166.520: HDMI0: hdmi_pixel_encoding: 300000000
007166.534: HDMI1: hdmi_pixel_encoding: 300000000
007189.591: dtb_file 'bcm2711-rpi-4-b.dtb'
007192.459: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
007192.476: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xbd2d
007205.045: brfs: File read: 48429 bytes
007211.815: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
007271.529: brfs: File read: 1523 bytes
007278.550: brfs: File read: /mfs/sd/overlays/rpi-poe.dtbo
007287.810: Loaded overlay 'rpi-poe'
007341.624: brfs: File read: 2937 bytes
007343.003: brfs: File read: /mfs/sd/config.txt
007343.481: dtparam: audio=on
007353.632: brfs: File read: 2253 bytes
007355.622: brfs: File read: /mfs/sd/overlays/disable-wifi.dtbo
007364.930: Loaded overlay 'disable-wifi'
007379.763: brfs: File read: 387 bytes
007380.580: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo
007395.075: Loaded overlay 'disable-bt'
007395.118: dtparam: poe_fan_temp0=32000
007398.569: dtparam: poe_fan_temp0_hyst=2000
007402.031: dtparam: poe_fan_temp1=35000
007405.462: dtparam: poe_fan_temp1_hyst=2000
007408.905: dtparam: poe_fan_temp2=40000
007412.330: dtparam: poe_fan_temp2_hyst=2000
007415.765: dtparam: poe_fan_temp3=45000
007419.163: dtparam: poe_fan_temp3_hyst=5000
007422.576: dtparam: sd_poll_once=true
007465.652: brfs: File read: 1073 bytes
007473.395: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo
007490.831: Loaded overlay 'vc4-fkms-v3d'
007531.592: brfs: File read: 1446 bytes
007532.850: brfs: File read: /mfs/sd/cmdline.txt
007532.889: Read command line from file 'cmdline.txt':
007532.903: 'console=serial0,115200 console=tty1 root=PARTUUID=97c11cc0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
008622.035: brfs: File read: 121 bytes
008923.007: brfs: File read: /mfs/sd/kernel7l.img
008923.029: Loading 'kernel7l.img' to 0x8000 size 0x65d6a8
008923.054: Device tree loaded to 0x2eff3900 (size 0xc690)
008928.968: bfs_xhci_stop
008928.980: XHCI-STOP
008929.149: xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb
008931.245: PCI reset
012271.639: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1
dmesg log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.11-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1399 SMP Thu Jan 28 12:09:48 GMT 2021
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[ 0.000000] On node 0 totalpages: 1012480
[ 0.000000] DMA zone: 2304 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 815872 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s50636 r8192 d23092 u81920
[ 0.000000] pcpu-alloc: s50636 r8192 d23092 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010176
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=97c11cc0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB)
[ 0.000000] Memory: 3653916K/4049920K available (10240K kernel code, 1354K rwdata, 3152K rodata, 2048K init, 890K bss, 133860K reserved, 262144K cma-reserved, 3263488K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 33824 entries in 67 pages
[ 0.000000] ftrace: allocated 67 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0
[ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000034] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000099] bcm2835: system timer (irq = 25)
[ 0.000747] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000768] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000792] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000810] Switching to timer-based delay loop, resolution 18ns
[ 0.001058] Console: colour dummy device 80x30
[ 0.001788] printk: console [tty1] enabled
[ 0.001858] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001912] pid_max: default: 32768 minimum: 301
[ 0.002092] LSM: Security Framework initializing
[ 0.002286] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002332] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003913] Disabling memory control group subsystem
[ 0.004049] CPU: Testing write buffer coherency: ok
[ 0.004522] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005754] Setting up static identity map for 0x200000 - 0x20003c
[ 0.005970] rcu: Hierarchical SRCU implementation.
[ 0.006912] smp: Bringing up secondary CPUs ...
[ 0.008142] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009519] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010845] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.011006] smp: Brought up 1 node, 4 CPUs
[ 0.011053] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.011083] CPU: All CPU(s) started in HYP mode.
[ 0.011110] CPU: Virtualization extensions available.
[ 0.011954] devtmpfs: initialized
[ 0.026123] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.026370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.026423] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.033136] pinctrl core: initialized pinctrl subsystem
[ 0.034232] NET: Registered protocol family 16
[ 0.038235] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.039020] audit: initializing netlink subsys (disabled)
[ 0.039293] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.039854] thermal_sys: Registered thermal governor 'step_wise'
[ 0.040797] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.040852] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.041261] Serial: AMBA PL011 UART driver
[ 0.072287] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.090893] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-27T22:19:57, variant start
[ 0.100907] raspberrypi-firmware soc:firmware: Firmware hash is 99d9a48302e4553cff3688692bb7e9ac760a03fa
[ 0.145599] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.149803] vgaarb: loaded
[ 0.150262] SCSI subsystem initialized
[ 0.150503] usbcore: registered new interface driver usbfs
[ 0.150578] usbcore: registered new interface driver hub
[ 0.150666] usbcore: registered new device driver usb
[ 0.151391] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.153269] clocksource: Switched to clocksource arch_sys_counter
[ 1.181401] VFS: Disk quotas dquot_6.6.0
[ 1.181528] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.181729] FS-Cache: Loaded
[ 1.181922] CacheFiles: Loaded
[ 1.190973] NET: Registered protocol family 2
[ 1.191872] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 1.192036] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 1.192116] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.192203] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.192374] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.192429] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.192711] NET: Registered protocol family 1
[ 1.193493] RPC: Registered named UNIX socket transport module.
[ 1.193526] RPC: Registered udp transport module.
[ 1.193554] RPC: Registered tcp transport module.
[ 1.193582] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.193621] PCI: CLS 0 bytes, default 64
[ 1.196458] Initialise system trusted keyrings
[ 1.196715] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 1.205040] zbud: loaded
[ 1.206823] FS-Cache: Netfs 'nfs' registered for caching
[ 1.207748] NFS: Registering the id_resolver key type
[ 1.207808] Key type id_resolver registered
[ 1.207838] Key type id_legacy registered
[ 1.207999] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.209021] Key type asymmetric registered
[ 1.209052] Asymmetric key parser 'x509' registered
[ 1.209258] bounce: pool size: 64 pages
[ 1.209330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.209568] io scheduler mq-deadline registered
[ 1.209600] io scheduler kyber registered
[ 1.214101] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.214154] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.214255] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.214363] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[ 1.275379] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.275759] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.275796] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.275831] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.275941] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.276202] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.279761] PCI: bus0: Fast back to back transfers disabled
[ 1.280116] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.280261] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.280711] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 1.284285] PCI: bus1: Fast back to back transfers disabled
[ 1.284400] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.284441] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.284545] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.284584] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.285005] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 1.285263] pcieport 0000:00:00.0: PME: Signaling with IRQ 62
[ 1.291421] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.294433] iproc-rng200 fe104000.rng: hwrng registered
[ 1.294758] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[ 1.295602] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.308665] brd: module loaded
[ 1.320776] loop: module loaded
[ 1.322425] Loading iSCSI transport class v2.0-870.
[ 1.325002] libphy: Fixed MDIO Bus: probed
[ 1.326275] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.343337] libphy: bcmgenet MII bus: probed
[ 1.423457] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.424614] usbcore: registered new interface driver r8152
[ 1.424700] usbcore: registered new interface driver lan78xx
[ 1.424790] usbcore: registered new interface driver smsc95xx
[ 1.426434] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
[ 1.426613] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.426664] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.430023] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890
[ 1.431359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.431400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.431436] usb usb1: Product: xHCI Host Controller
[ 1.431466] usb usb1: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd
[ 1.431497] usb usb1: SerialNumber: 0000:01:00.0
[ 1.432228] hub 1-0:1.0: USB hub found
[ 1.432352] hub 1-0:1.0: 1 port detected
[ 1.433023] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.433067] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.433112] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.433680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.433720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.433756] usb usb2: Product: xHCI Host Controller
[ 1.433786] usb usb2: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd
[ 1.433817] usb usb2: SerialNumber: 0000:01:00.0
[ 1.434545] hub 2-0:1.0: USB hub found
[ 1.434639] hub 2-0:1.0: 4 ports detected
[ 1.436326] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.436647] dwc_otg: FIQ enabled
[ 1.436662] dwc_otg: NAK holdoff enabled
[ 1.436677] dwc_otg: FIQ split-transaction FSM enabled
[ 1.436695] Module dwc_common_port init
[ 1.437151] usbcore: registered new interface driver uas
[ 1.437287] usbcore: registered new interface driver usb-storage
[ 1.437489] mousedev: PS/2 mouse device common for all mice
[ 1.439172] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.442685] sdhci: Secure Digital Host Controller Interface driver
[ 1.442721] sdhci: Copyright(c) Pierre Ossman
[ 1.443430] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.446868] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.447215] hid: raw HID events driver (C) Jiri Kosina
[ 1.447432] usbcore: registered new interface driver usbhid
[ 1.447463] usbhid: USB HID core driver
[ 1.453165] Initializing XFRM netlink socket
[ 1.453227] NET: Registered protocol family 17
[ 1.453396] Key type dns_resolver registered
[ 1.453758] Registering SWP/SWPB emulation handler
[ 1.453935] registered taskstats version 1
[ 1.453976] Loading compiled-in X.509 certificates
[ 1.454791] Key type ._fscrypt registered
[ 1.454822] Key type .fscrypt registered
[ 1.454850] Key type fscrypt-provisioning registered
[ 1.466292] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.466574] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.466667] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 2.681876] printk: console [ttyAMA0] enabled
[ 2.693892] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.705646] of_cfs_init
[ 2.708369] of_cfs_init: OK
[ 2.739949] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 2.748031] Waiting for root device PARTUUID=97c11cc0-02...
[ 2.943309] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.126023] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 3.134257] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.141415] usb 1-1: Product: USB2.0 Hub
[ 3.147134] hub 1-1:1.0: USB hub found
[ 3.151132] hub 1-1:1.0: 4 ports detected
[ 3.273773] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 3.304925] usb 2-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 3.313131] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.320313] usb 2-1: Product: Best USB Device
[ 3.324701] usb 2-1: Manufacturer: ULT-Best
[ 3.328902] usb 2-1: SerialNumber: 042003192F82
[ 3.356537] scsi host0: uas
[ 3.360705] scsi 0:0:0:0: Direct-Access INTEL SS DSC2CT240A4 0 PQ: 0 ANSI: 6
[ 3.371122] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.378965] sd 0:0:0:0: [sda] Write Protect is off
[ 3.383813] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.384318] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.394445] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[ 3.404066] sda: sda1 sda2
[ 3.408693] random: fast init done
[ 3.413383] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.447872] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.454814] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.493313] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[ 3.624758] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.631978] EXT4-fs (sda2): 1 orphan inode deleted
[ 3.634002] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 3.636827] EXT4-fs (sda2): recovery complete
[ 3.645181] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.653109] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.656868] usb 1-1.3: Product: USB Receiver
[ 3.656882] usb 1-1.3: Manufacturer: Logitech
[ 3.673397] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.682764] devtmpfs: mounted
[ 3.695237] Freeing unused kernel memory: 2048K
[ 3.700204] Run /sbin/init as init process
[ 3.700576] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0001/input/input0
[ 3.704328] with arguments:
[ 3.704340] /sbin/init
[ 3.704351] with environment:
[ 3.719950] HOME=/
[ 3.719964] TERM=linux
[ 3.784211] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0
[ 3.807184] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input1
[ 3.823876] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input2
[ 3.903683] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input3
[ 3.921172] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1
[ 3.934941] systemd[1]: System time before build time, advancing clock.
[ 3.942375] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[ 4.015576] NET: Registered protocol family 10
[ 4.021436] Segment Routing with IPv6
[ 4.070652] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.092834] systemd[1]: Detected architecture arm.
[ 4.158196] systemd[1]: Set hostname to .
[ 4.349137] uart-pl011 fe201000.serial: no DMA platform data
[ 4.738427] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.753809] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.760526] systemd[1]: Reached target Swap.
[ 4.765629] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.772956] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.781387] systemd[1]: Created slice User and Session Slice.
[ 4.788241] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.795509] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.804496] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.816580] systemd[1]: Created slice system-getty.slice.
[ 5.602533] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.712270] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 6.188597] rpi-poe-fan rpi-poe-fan@0: Failed to get default PWM value: -5
[ 6.188641] rpi-poe-fan: probe of rpi-poe-fan@0 failed with error -5
[ 6.225761] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 6.229918] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 6.236842] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 6.238892] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 6.300767] mc: Linux media interface: v0.10
[ 6.307743] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.328088] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 6.331377] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.344494] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 6.344520] [vc_sm_connected_init]: start
[ 6.352088] [vc_sm_connected_init]: installed successfully
[ 6.370948] videodev: Linux video capture interface: v2.00
[ 6.401156] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.405679] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.424622] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 6.425754] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 6.427409] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 6.439887] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.441966] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 6.442001] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 6.442027] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 6.442067] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 6.442090] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 6.442373] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 6.453684] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.453735] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.456942] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.456990] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.461612] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.461657] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.534947] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.540187] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[ 6.540316] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 6.547117] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[ 6.687688] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 6.729265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.238000] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[ 7.380044] input: Logitech Wireless Device PID:4062 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4062.0004/input/input5
[ 7.381467] input: Logitech Wireless Device PID:4062 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4062.0004/input/input6
[ 7.381874] input: Logitech Wireless Device PID:4062 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4062.0004/input/input7
[ 7.382279] hid-generic 0003:046D:4062.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4062] on usb-0000:01:00.0-1.3/input2:1
[ 7.388812] input: Logitech Wireless Device PID:405e Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input11
[ 7.393604] input: Logitech Wireless Device PID:405e Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input12
[ 7.394239] input: Logitech Wireless Device PID:405e Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input13
[ 7.401648] input: Logitech Wireless Device PID:405e System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input14
[ 7.402139] hid-generic 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:405e] on usb-0000:01:00.0-1.3/input2:2
[ 7.945865] input: Logitech K850 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4062.0004/input/input18
[ 7.947016] logitech-hidpp-device 0003:046D:4062.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K850] on usb-0000:01:00.0-1.3/input2:1
[ 8.652588] input: Logitech M720 Triathlon as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input19
[ 8.661265] logitech-hidpp-device 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:01:00.0-1.3/input2:2
[ 8.849998] random: crng init done
[ 8.850026] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.949956] 8021q: 802.1Q VLAN Support v1.8
[ 9.134449] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.163615] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:307200k SSFS
[ 9.248996] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.339025] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 9.340071] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.513588] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 13.513642] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.113336] vcc-sd: disabling
The text was updated successfully, but these errors were encountered: