From a3d6532a75eaba132a9d2812cdc4729af49498db Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 15 Dec 2015 15:35:57 -0800 Subject: [PATCH 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates. These will be used for enabling UART1, SPI1, and SPI2. Signed-off-by: Eric Anholt Acked-by: Rob Herring Signed-off-by: Michael Turquette --- .../bindings/clock/brcm,bcm2835-aux-clock.txt | 31 +++++++++++++++++++ include/dt-bindings/clock/bcm2835-aux.h | 17 ++++++++++ 2 files changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt create mode 100644 include/dt-bindings/clock/bcm2835-aux.h diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt new file mode 100644 index 00000000000000..7a837d2182acf7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt @@ -0,0 +1,31 @@ +Broadcom BCM2835 auxiliary peripheral support + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The auxiliary peripherals (UART, SPI1, and SPI2) have a small register +area controlling clock gating to the peripherals, and providing an IRQ +status register. + +Required properties: +- compatible: Should be "brcm,bcm2835-aux" +- #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835-aux.h +- reg: Specifies base physical address and size of the registers +- clocks: The parent clock phandle + +Example: + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + clocks = <&clk_osc>; + }; + + aux: aux@0x7e215004 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + }; diff --git a/include/dt-bindings/clock/bcm2835-aux.h b/include/dt-bindings/clock/bcm2835-aux.h new file mode 100644 index 00000000000000..d91156e2658dab --- /dev/null +++ b/include/dt-bindings/clock/bcm2835-aux.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BCM2835_AUX_CLOCK_UART 0 +#define BCM2835_AUX_CLOCK_SPI1 1 +#define BCM2835_AUX_CLOCK_SPI2 2 +#define BCM2835_AUX_CLOCK_COUNT 3 From 53b7cef89d6d5d866f1c6fa1d492191b64b7e7d4 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 15 Dec 2015 15:35:58 -0800 Subject: [PATCH 2/3] clk: bcm2835: Add a driver for the auxiliary peripheral clock gates. There are a pair of SPI masters and a mini UART that were last minute additions. As a result, they didn't get integrated in the same way as the other gates off of the VPU clock in CPRMAN. Signed-off-by: Eric Anholt Signed-off-by: Michael Turquette updated Makefile to preserve the rasoberry pi architectures --- drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-bcm2835-aux.c | 85 +++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) create mode 100644 drivers/clk/bcm/clk-bcm2835-aux.c diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index a1b4cbcae647e7..84070d51da8b11 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709) += clk-bcm2835.o +obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c b/drivers/clk/bcm/clk-bcm2835-aux.c new file mode 100644 index 00000000000000..e4f89e28b5ecf5 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm2835-aux.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2015 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#define BCM2835_AUXIRQ 0x00 +#define BCM2835_AUXENB 0x04 + +static int bcm2835_aux_clk_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct clk_onecell_data *onecell; + const char *parent; + struct clk *parent_clk; + struct resource *res; + void __iomem *reg, *gate; + + parent_clk = devm_clk_get(dev, NULL); + if (IS_ERR(parent_clk)) + return PTR_ERR(parent_clk); + parent = __clk_get_name(parent_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(dev, res); + if (!reg) + return -ENODEV; + + onecell = devm_kmalloc(dev, sizeof(*onecell), GFP_KERNEL); + if (!onecell) + return -ENOMEM; + onecell->clk_num = BCM2835_AUX_CLOCK_COUNT; + onecell->clks = devm_kcalloc(dev, BCM2835_AUX_CLOCK_COUNT, + sizeof(*onecell->clks), GFP_KERNEL); + if (!onecell->clks) + return -ENOMEM; + + gate = reg + BCM2835_AUXENB; + onecell->clks[BCM2835_AUX_CLOCK_UART] = + clk_register_gate(dev, "aux_uart", parent, 0, gate, 0, 0, NULL); + + onecell->clks[BCM2835_AUX_CLOCK_SPI1] = + clk_register_gate(dev, "aux_spi1", parent, 0, gate, 1, 0, NULL); + + onecell->clks[BCM2835_AUX_CLOCK_SPI2] = + clk_register_gate(dev, "aux_spi2", parent, 0, gate, 2, 0, NULL); + + of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get, onecell); + + return 0; +} + +static const struct of_device_id bcm2835_aux_clk_of_match[] = { + { .compatible = "brcm,bcm2835-aux", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm2835_aux_clk_of_match); + +static struct platform_driver bcm2835_aux_clk_driver = { + .driver = { + .name = "bcm2835-aux-clk", + .of_match_table = bcm2835_aux_clk_of_match, + }, + .probe = bcm2835_aux_clk_probe, +}; +builtin_platform_driver(bcm2835_aux_clk_driver); + +MODULE_AUTHOR("Eric Anholt "); +MODULE_DESCRIPTION("BCM2835 auxiliary peripheral clock driver"); +MODULE_LICENSE("GPL v2"); From 42f2a4e4121f7010cc3192ecbdfdfe5e89cbb657 Mon Sep 17 00:00:00 2001 From: Fraser Date: Tue, 23 Feb 2016 10:04:37 +1100 Subject: [PATCH 3/3] Aux SPI 1&2 implementation Adds aux spi 1 & 2 devices to compatible raspberry PIs. * Minor config of the driver build environment to ensure they get built for CONFIG_ARCH_BCM2708 & CONFIG_ARCH_BCM2709 devices. * Adds the aux spi driver into the defconfigs as a module. * Adds the auxiliary and spi1/2 devices into the device tree in a disabled state * Provides decide tree overlays which enables the devices and gives users a degree of control over how they are setup. --- arch/arm/boot/dts/bcm2708_common.dtsi | 34 ++++++- arch/arm/boot/dts/overlays/Makefile | 6 ++ arch/arm/boot/dts/overlays/README | 99 +++++++++++++++++++ .../boot/dts/overlays/spi1-1cs-overlay.dts | 57 +++++++++++ .../boot/dts/overlays/spi1-2cs-overlay.dts | 69 +++++++++++++ .../boot/dts/overlays/spi1-3cs-overlay.dts | 81 +++++++++++++++ .../boot/dts/overlays/spi2-1cs-overlay.dts | 57 +++++++++++ .../boot/dts/overlays/spi2-2cs-overlay.dts | 69 +++++++++++++ .../boot/dts/overlays/spi2-3cs-overlay.dts | 81 +++++++++++++++ arch/arm/configs/bcm2709_defconfig | 1 + arch/arm/configs/bcmrpi_defconfig | 1 + drivers/clk/bcm/Makefile | 2 +- drivers/spi/Kconfig | 2 +- 13 files changed, 556 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts diff --git a/arch/arm/boot/dts/bcm2708_common.dtsi b/arch/arm/boot/dts/bcm2708_common.dtsi index 18d3c4516ff0b7..792dc0624d53fb 100644 --- a/arch/arm/boot/dts/bcm2708_common.dtsi +++ b/arch/arm/boot/dts/bcm2708_common.dtsi @@ -1,3 +1,4 @@ +#include #include "skeleton.dtsi" / { @@ -5,6 +6,7 @@ aliases { audio = &audio; + aux = &aux; sound = &sound; soc = &soc; dma = &dma; @@ -19,6 +21,8 @@ spi0 = &spi0; i2c0 = &i2c0; uart1 = &uart1; + spi1 = &spi1; + spi2 = &spi2; mmc = &mmc; i2c1 = &i2c1; i2c2 = &i2c2; @@ -186,6 +190,14 @@ status = "disabled"; }; + aux: aux@0x7e215004 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; + reg = <0x7e215000 0x8>; + clocks = <&clk_core>; + status = "disabled"; + }; + uart1: uart@7e215040 { compatible = "brcm,bcm2835-aux-uart", "ns16550"; reg = <0x7e215040 0x40>; @@ -194,7 +206,27 @@ reg-shift = <2>; no-loopback-test; status = "disabled"; - }; + }; + + spi1: spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>, <0x7e215000 0x8>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@7e2150C0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150C0 0x40>, <0x7e215000 0x8>; + interrupts = <1 29>; + clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; mmc: mmc@7e300000 { compatible = "brcm,bcm2835-mmc"; diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile index 4d9d64059660c6..a787d6634f0eab 100644 --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -57,6 +57,12 @@ dtb-$(RPI_DT_OVERLAYS) += sdtweak-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi1-1cs-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi1-2cs-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi1-3cs-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi2-1cs-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi2-2cs-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += spi2-3cs-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += spi-gpio35-39-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README index 4de0b6fbcb504b..c456eeb980b7bc 100644 --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -707,6 +707,105 @@ Load: dtoverlay=smi-nand Params: +Name: spi1-1cs +Info: Enables spi1 with a single chip select (CS) line and associated spidev + dev node. The gpio pin number for the CS line and spidev device node + creation are configurable. + N.B.: spi1 is only accessible on devices with a 40pin header, eg: + A+, B+, Zero and PI2 B; as well as the Compute Module. +Load: dtoverlay=spi1-1cs,= +Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.0 (default + is 'okay' or enabled). + + +Name: spi1-2cs +Info: Enables spi1 with a two chip select (CS) lines and associated spidev + dev nodes. The gpio pin numbers for the CS lines and spidev device node + creation are configurable. + N.B.: spi1 is only accessible on devices with a 40pin header, eg: + A+, B+, Zero and PI2 B; as well as the Compute Module. +Load: dtoverlay=spi1-2cs,= +Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). + cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.0 (default + is 'okay' or enabled). + cs1_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.1 (default + is 'okay' or enabled). + + +Name: spi1-3cs +Info: Enables spi1 with a three chip select (CS) lines and associated spidev + dev nodes. The gpio pin numbers for the CS lines and spidev device node + creation are configurable. + N.B.: spi1 is only accessible on devices with a 40pin header, eg: + A+, B+, Zero and PI2 B; as well as the Compute Module. +Load: dtoverlay=spi1-3cs,= +Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). + cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). + cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.0 (default + is 'okay' or enabled). + cs1_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.1 (default + is 'okay' or enabled). + cs2_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev1.2 (default + is 'okay' or enabled). + + +Name: spi2-1cs +Info: Enables spi2 with a single chip select (CS) line and associated spidev + dev node. The gpio pin number for the CS line and spidev device node + creation are configurable. + N.B.: spi2 is only accessible with the Compute Module. +Load: dtoverlay=spi2-1cs,= +Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.0 (default + is 'okay' or enabled). + + +Name: spi2-2cs +Info: Enables spi2 with a two chip select (CS) lines and associated spidev + dev nodes. The gpio pin numbers for the CS lines and spidev device node + creation are configurable. + N.B.: spi2 is only accessible with the Compute Module. +Load: dtoverlay=spi2-2cs,= +Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). + cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.0 (default + is 'okay' or enabled). + cs1_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.1 (default + is 'okay' or enabled). + + +Name: spi2-3cs +Info: Enables spi2 with a three chip select (CS) lines and associated spidev + dev nodes. The gpio pin numbers for the CS lines and spidev device node + creation are configurable. + N.B.: spi2 is only accessible with the Compute Module. +Load: dtoverlay=spi2-3cs,= +Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). + cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). + cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). + cs0_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.0 (default + is 'okay' or enabled). + cs1_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.1 (default + is 'okay' or enabled). + cs2_spidev Set to 'disabled' to stop the creation of a + userspace device node /dev/spidev2.2 (default + is 'okay' or enabled). + + Name: spi-gpio35-39 Info: move SPI function block to GPIO 35 to 39 Load: dtoverlay=spi-gpio35-39 diff --git a/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts new file mode 100644 index 00000000000000..399e88b317dfea --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts @@ -0,0 +1,57 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi1_pins: spi1_pins { + brcm,pins = <19 20 21>; + brcm,function = <3>; /* alt4 */ + }; + + spi1_cs_pins: spi1_cs_pins { + brcm,pins = <18>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi1>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs_pins>; + cs-gpios = <&gpio 18 1>; + status = "okay"; + + spidev1_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs0_spidev = <&spidev1_0>,"status"; + }; +}; diff --git a/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts new file mode 100644 index 00000000000000..ad07ef9d4370b5 --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts @@ -0,0 +1,69 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi1_pins: spi1_pins { + brcm,pins = <19 20 21>; + brcm,function = <3>; /* alt4 */ + }; + + spi1_cs_pins: spi1_cs_pins { + brcm,pins = <18 17>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi1>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs_pins>; + cs-gpios = <&gpio 18 1>, <&gpio 17 1>; + status = "okay"; + + spidev1_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev1_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", + <&frag1>,"cs-gpios:16"; + cs0_spidev = <&spidev1_0>,"status"; + cs1_spidev = <&spidev1_1>,"status"; + }; +}; diff --git a/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts new file mode 100644 index 00000000000000..3e7d4d733e758e --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts @@ -0,0 +1,81 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi1_pins: spi1_pins { + brcm,pins = <19 20 21>; + brcm,function = <3>; /* alt4 */ + }; + + spi1_cs_pins: spi1_cs_pins { + brcm,pins = <18 17 16>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi1>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs_pins>; + cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; + status = "okay"; + + spidev1_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev1_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev1_2: spidev@2 { + compatible = "spidev"; + reg = <2>; /* CE2 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", + <&frag1>,"cs-gpios:16"; + cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", + <&frag1>,"cs-gpios:28"; + cs0_spidev = <&spidev1_0>,"status"; + cs1_spidev = <&spidev1_1>,"status"; + cs2_spidev = <&spidev1_2>,"status"; + }; +}; diff --git a/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts new file mode 100644 index 00000000000000..127d0baa86c82f --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts @@ -0,0 +1,57 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi2_pins: spi2_pins { + brcm,pins = <40 41 42>; + brcm,function = <3>; /* alt4 */ + }; + + spi2_cs_pins: spi2_cs_pins { + brcm,pins = <43>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi2>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins &spi2_cs_pins>; + cs-gpios = <&gpio 43 1>; + status = "okay"; + + spidev2_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs0_spidev = <&spidev2_0>,"status"; + }; +}; diff --git a/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts new file mode 100644 index 00000000000000..1d6c76c28294af --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts @@ -0,0 +1,69 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi2_pins: spi2_pins { + brcm,pins = <40 41 42>; + brcm,function = <3>; /* alt4 */ + }; + + spi2_cs_pins: spi2_cs_pins { + brcm,pins = <43 44>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi2>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins &spi2_cs_pins>; + cs-gpios = <&gpio 43 1>, <&gpio 44 1>; + status = "okay"; + + spidev2_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev2_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", + <&frag1>,"cs-gpios:16"; + cs0_spidev = <&spidev2_0>,"status"; + cs1_spidev = <&spidev2_1>,"status"; + }; +}; diff --git a/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts new file mode 100644 index 00000000000000..068c6101050e9c --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts @@ -0,0 +1,81 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&gpio>; + __overlay__ { + spi2_pins: spi2_pins { + brcm,pins = <40 41 42>; + brcm,function = <3>; /* alt4 */ + }; + + spi2_cs_pins: spi2_cs_pins { + brcm,pins = <43 44 45>; + brcm,function = <1>; /* output */ + }; + }; + }; + + fragment@1 { + target = <&spi2>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins &spi2_cs_pins>; + cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; + status = "okay"; + + spidev2_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev2_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + + spidev2_2: spidev@2 { + compatible = "spidev"; + reg = <2>; /* CE2 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <500000>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&aux>; + __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", + <&frag1>,"cs-gpios:4"; + cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", + <&frag1>,"cs-gpios:16"; + cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", + <&frag1>,"cs-gpios:28"; + cs0_spidev = <&spidev2_0>,"status"; + cs1_spidev = <&spidev2_1>,"status"; + cs2_spidev = <&spidev2_2>,"status"; + }; +}; diff --git a/arch/arm/configs/bcm2709_defconfig b/arch/arm/configs/bcm2709_defconfig index fc3525411dd631..ff61f6f8f26707 100644 --- a/arch/arm/configs/bcm2709_defconfig +++ b/arch/arm/configs/bcm2709_defconfig @@ -598,6 +598,7 @@ CONFIG_I2C_BCM2708=m CONFIG_I2C_GPIO=m CONFIG_SPI=y CONFIG_SPI_BCM2835=m +CONFIG_SPI_BCM2835AUX=m CONFIG_SPI_SPIDEV=y CONFIG_PPS=m CONFIG_PPS_CLIENT_LDISC=m diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig index 51dc0197b7e47d..598a6b3534033a 100644 --- a/arch/arm/configs/bcmrpi_defconfig +++ b/arch/arm/configs/bcmrpi_defconfig @@ -591,6 +591,7 @@ CONFIG_I2C_BCM2708=m CONFIG_I2C_GPIO=m CONFIG_SPI=y CONFIG_SPI_BCM2835=m +CONFIG_SPI_BCM2835AUX=m CONFIG_SPI_SPIDEV=y CONFIG_PPS=m CONFIG_PPS_CLIENT_LDISC=m diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 84070d51da8b11..d60fd3f220a0ea 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709) += clk-bcm2835.o -obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o +obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709) += clk-bcm2835-aux.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e842e8613b144f..c9d1558eddcc68 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -90,7 +90,7 @@ config SPI_BCM2835 config SPI_BCM2835AUX tristate "BCM2835 SPI auxiliary controller" - depends on ARCH_BCM2835 || COMPILE_TEST + depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 || COMPILE_TEST depends on GPIOLIB help This selects a driver for the Broadcom BCM2835 SPI aux master.