Document missing keys mapped on third party types

Closes gh-15980

Author: snicoll

spring-boot-project/spring-boot-docs/src/main/asciidoc/appendix-application-properties.adoc

@@ -806,27 +806,27 @@ content into your application. Rather, pick only the properties that you need.
 	spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
 	spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether to ignore the transacted flag when creating session.
 	spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether local transactions are desired.
-	spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
-	spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
-	spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
-	spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool.
-	spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool.
-	spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
-	spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
+	spring.jta.atomikos.connectionfactory.maintenance-interval=60 # Time, in seconds, between runs of the pool's maintenance thread.
+	spring.jta.atomikos.connectionfactory.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
+	spring.jta.atomikos.connectionfactory.max-lifetime=0 # Time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
+	spring.jta.atomikos.connectionfactory.max-pool-size=1 # Maximum size of the pool.
+	spring.jta.atomikos.connectionfactory.min-pool-size=1 # Minimum size of the pool.
+	spring.jta.atomikos.connectionfactory.reap-timeout=0 # Reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
+	spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # Unique name used to identify the resource during recovery.
 	spring.jta.atomikos.connectionfactory.xa-connection-factory-class-name= # Vendor-specific implementation of XAConnectionFactory.
 	spring.jta.atomikos.connectionfactory.xa-properties= # Vendor-specific XA properties.
 	spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
-	spring.jta.atomikos.datasource.concurrent-connection-validation= # Whether to use concurrent connection validation.
+	spring.jta.atomikos.datasource.concurrent-connection-validation=true # Whether to use concurrent connection validation.
 	spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool.
-	spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
-	spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
-	spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
-	spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
-	spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool.
-	spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool.
-	spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
+	spring.jta.atomikos.datasource.login-timeout=0 # Timeout, in seconds, for establishing a database connection.
+	spring.jta.atomikos.datasource.maintenance-interval=60 # Time, in seconds, between runs of the pool's maintenance thread.
+	spring.jta.atomikos.datasource.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
+	spring.jta.atomikos.datasource.max-lifetime=0 # Time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
+	spring.jta.atomikos.datasource.max-pool-size=1 # Maximum size of the pool.
+	spring.jta.atomikos.datasource.min-pool-size=1 # Minimum size of the pool.
+	spring.jta.atomikos.datasource.reap-timeout=0 # Reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
 	spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
-	spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery.
+	spring.jta.atomikos.datasource.unique-resource-name=dataSource # Unique name used to identify the resource during recovery.
 	spring.jta.atomikos.datasource.xa-data-source-class-name= # Vendor-specific implementation of XAConnectionFactory.
 	spring.jta.atomikos.datasource.xa-properties= # Vendor-specific XA properties.
 	spring.jta.atomikos.properties.allow-sub-transactions=true # Specify whether sub-transactions are allowed.
@@ -852,51 +852,49 @@ content into your application. Rather, pick only the properties that you need.
 	spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool.
 	spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
 	spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
-	spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether the transaction manager should allow mixing XA and non-XA transactions.
+	spring.jta.bitronix.connectionfactory.allow-local-transactions=false # Whether the transaction manager should allow mixing XA and non-XA transactions.
 	spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
 	spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
 	spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether producers and consumers should be cached.
 	spring.jta.bitronix.connectionfactory.class-name= # Underlying implementation class name of the XA resource.
 	spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether the provider can run many transactions on the same connection and supports transaction interleaving.
-	spring.jta.bitronix.connectionfactory.disabled= # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
+	spring.jta.bitronix.connectionfactory.disabled=false # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
 	spring.jta.bitronix.connectionfactory.driver-properties= # Properties that should be set on the underlying implementation.
-	spring.jta.bitronix.connectionfactory.failed= # Mark this resource producer as failed.
 	spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether recovery failures should be ignored.
-	spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
-	spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
-	spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool.
-	spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider.
+	spring.jta.bitronix.connectionfactory.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
+	spring.jta.bitronix.connectionfactory.max-pool-size=0 # Maximum size of the pool. 0 denotes no limit.
+	spring.jta.bitronix.connectionfactory.min-pool-size=0 # Minimum size of the pool.
+	spring.jta.bitronix.connectionfactory.password= # Password to use to connect to the JMS provider.
 	spring.jta.bitronix.connectionfactory.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
-	spring.jta.bitronix.connectionfactory.test-connections=true # Whether connections should be tested when acquired from the pool.
-	spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
-	spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
+	spring.jta.bitronix.connectionfactory.test-connections=false # Whether connections should be tested when acquired from the pool.
+	spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # Position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
+	spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # Unique name used to identify the resource during recovery.
 	spring.jta.bitronix.connectionfactory.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
-	spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider.
+	spring.jta.bitronix.connectionfactory.user= # User to use to connect to the JMS provider.
 	spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool.
 	spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
 	spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
-	spring.jta.bitronix.datasource.allow-local-transactions=true # Whether the transaction manager should allow mixing XA and non-XA transactions.
+	spring.jta.bitronix.datasource.allow-local-transactions=false # Whether the transaction manager should allow mixing XA and non-XA transactions.
 	spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
 	spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
 	spring.jta.bitronix.datasource.class-name= # Underlying implementation class name of the XA resource.
-	spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections.
+	spring.jta.bitronix.datasource.cursor-holdability= # Default cursor holdability for connections.
 	spring.jta.bitronix.datasource.defer-connection-release=true # Whether the database can run many transactions on the same connection and supports transaction interleaving.
-	spring.jta.bitronix.datasource.disabled= # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
+	spring.jta.bitronix.datasource.disabled=false # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
 	spring.jta.bitronix.datasource.driver-properties= # Properties that should be set on the underlying implementation.
-	spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether Connection.isValid() is called when acquiring a connection from the pool.
-	spring.jta.bitronix.datasource.failed= # Mark this resource producer as failed.
+	spring.jta.bitronix.datasource.enable-jdbc4-connection-test=false # Whether Connection.isValid() is called when acquiring a connection from the pool.
 	spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether recovery failures should be ignored.
-	spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections.
-	spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions.
+	spring.jta.bitronix.datasource.isolation-level= # Default isolation level for connections.
+	spring.jta.bitronix.datasource.local-auto-commit= # Default auto-commit mode for local transactions.
 	spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
-	spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
-	spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
-	spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool.
-	spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache.
+	spring.jta.bitronix.datasource.max-idle-time=60 # Time, in seconds, after which connections are cleaned up from the pool.
+	spring.jta.bitronix.datasource.max-pool-size=0 # Maximum size of the pool. 0 denotes no limit.
+	spring.jta.bitronix.datasource.min-pool-size=0 # Minimum size of the pool.
+	spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # Target size of the prepared statement cache. 0 disables the cache.
 	spring.jta.bitronix.datasource.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
 	spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
-	spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, and always last is Integer.MAX_VALUE).
-	spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery.
+	spring.jta.bitronix.datasource.two-pc-ordering-position=1 # Position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, and always last is Integer.MAX_VALUE).
+	spring.jta.bitronix.datasource.unique-name=dataSource # Unique name used to identify the resource during recovery.
 	spring.jta.bitronix.datasource.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
 	spring.jta.bitronix.properties.allow-multiple-lrc=false # Whether to allow multiple LRC resources to be enlisted into the same transaction.
 	spring.jta.bitronix.properties.asynchronous2-pc=false # Whether to enable asynchronously execution of two phase commit.