Skip to content

Commit b1dcb39

Browse files
fpistmfpistm
committed
[PinMap] Update
Signed-off-by: Frederic Pillon <[email protected]>
1 parent a0a4804 commit b1dcb39

File tree

42 files changed

+5353
-32
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

42 files changed

+5353
-32
lines changed

‎src/genpinmap/Arduino/STM32L412C8Tx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412C8Ux/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412CBTx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412CBTxP/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -76,7 +76,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7676

7777
#ifdef HAL_TIM_MODULE_ENABLED
7878
WEAK const PinMap PinMap_PWM[] = {
79-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
79+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8080
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8181
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8282
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -147,7 +147,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
147147

148148
#ifdef HAL_UART_MODULE_ENABLED
149149
WEAK const PinMap PinMap_UART_CTS[] = {
150-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
150+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
151151
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
152152
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
153153
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412CBUx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412CBUxP/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -76,7 +76,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7676

7777
#ifdef HAL_TIM_MODULE_ENABLED
7878
WEAK const PinMap PinMap_PWM[] = {
79-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
79+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8080
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8181
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8282
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -147,7 +147,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
147147

148148
#ifdef HAL_UART_MODULE_ENABLED
149149
WEAK const PinMap PinMap_UART_CTS[] = {
150-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
150+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
151151
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
152152
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
153153
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412R8Ix/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412R8Tx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412RBIx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412RBIxP/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -90,7 +90,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9090

9191
#ifdef HAL_TIM_MODULE_ENABLED
9292
WEAK const PinMap PinMap_PWM[] = {
93-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
93+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9494
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9595
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9696
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -170,7 +170,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
170170

171171
#ifdef HAL_UART_MODULE_ENABLED
172172
WEAK const PinMap PinMap_UART_CTS[] = {
173-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
173+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
174174
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
175175
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
176176
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412RBTx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L412RBTxP/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -90,7 +90,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9090

9191
#ifdef HAL_TIM_MODULE_ENABLED
9292
WEAK const PinMap PinMap_PWM[] = {
93-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
93+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9494
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9595
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9696
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -170,7 +170,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
170170

171171
#ifdef HAL_UART_MODULE_ENABLED
172172
WEAK const PinMap PinMap_UART_CTS[] = {
173-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
173+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
174174
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
175175
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
176176
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L422CBTx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L422CBUx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -78,7 +78,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
7878

7979
#ifdef HAL_TIM_MODULE_ENABLED
8080
WEAK const PinMap PinMap_PWM[] = {
81-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
81+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
8282
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
8383
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
8484
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -153,7 +153,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
153153

154154
#ifdef HAL_UART_MODULE_ENABLED
155155
WEAK const PinMap PinMap_UART_CTS[] = {
156-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
156+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
157157
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158158
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
159159
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L422RBIx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

‎src/genpinmap/Arduino/STM32L422RBTx/PeripheralPins.c

+2-2
Original file line numberDiff line numberDiff line change
@@ -92,7 +92,7 @@ WEAK const PinMap PinMap_I2C_SCL[] = {
9292

9393
#ifdef HAL_TIM_MODULE_ENABLED
9494
WEAK const PinMap PinMap_PWM[] = {
95-
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE, 1, 0)}, // TIM2_CH1
95+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
9696
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
9797
{PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM15, 1, 1)}, // TIM15_CH1N
9898
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
@@ -174,7 +174,7 @@ WEAK const PinMap PinMap_UART_RTS[] = {
174174

175175
#ifdef HAL_UART_MODULE_ENABLED
176176
WEAK const PinMap PinMap_UART_CTS[] = {
177-
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF_NONE)},
177+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
178178
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
179179
{PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
180180
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},

0 commit comments

Comments
 (0)