DISCO-L476VG Pinmap error: wrong port number

[star297]

InterruptIn up(JOYSTICK_UP);

Creates this error. Also screws up interrupt and Ticker functions. Other button inputs work fine.
Had a quick look, but couldn't see anything in the pin defines.

[0xc0170]

cc @bcostm

Confirmed on DISCO-L476VG.

Seems like a bad definition of JOYSTICK_UP in PinNames.h?

    JOYSTICK_CENTER = PA_0,
    JOYSTICK_LEFT = PA_1,
    JOYSTICK_RIGHT = PA_2,
    JOYSTICK_UP = PA_3,
    JOYSTICK_DOWN = PA_5,

[bcostm]

I've just rechecked the board schematic and the pins definitions are OK. There is something else that causes this problem.
I have also rechecked the DISCO_L476VG_Leds_Buttons example on mbed IDE with mbed v113 and I confirm also the problem when the Up pin is configured. Without it it is OK.
I will analyse this deeper.

[star297]

See #1509.
Setting the NVIC_RAM_VECTOR_ADDRESS to 0x10000000 instead of 0x20000000 in the cmsis_nvic.c file has fixed this problem.