STM32WB - Update CubeDriver from v1.0.0 to v1.4.0

targets/TARGET_STM/TARGET_STM32WB/STM32Cube_FW/app_common.h

@@ -1,9 +1,9 @@
 /**
-  ******************************************************************************
+ ******************************************************************************
   * File Name          : app_common.h
-  * Description        : App Common application configuration file for BLE
-  *                      middleWare.
-  ******************************************************************************
+  * Description        : App Common application configuration file for STM32WPAN Middleware.
+  *
+ ******************************************************************************
   * @attention
   *
   * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.

targets/TARGET_STM/TARGET_STM32WB/STM32Cube_FW/app_conf.h

@@ -24,6 +24,7 @@
 
 #include "hw.h"
 #include "hw_conf.h"
+#include "hw_if.h"
 
 /******************************************************************************
  * Transparent Mode Config
@@ -431,6 +432,13 @@ typedef enum
     CFG_LPM_APP,
 } CFG_LPM_Id_t;
 
-#endif /*__APP_CONFIG_H */
+/******************************************************************************
+ * OTP manager
+ ******************************************************************************/
+#define CFG_OTP_BASE_ADDRESS    OTP_AREA_BASE
+
+#define CFG_OTP_END_ADRESS      OTP_AREA_END_ADDR
+
+#endif /*APP_CONF_H */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

targets/TARGET_STM/TARGET_STM32WB/STM32Cube_FW/hw_conf.h

@@ -1,13 +1,13 @@
 /* USER CODE BEGIN Header */
 /**
-  ******************************************************************************
+ ******************************************************************************
   * File Name          : hw_conf.h
   * Description        : Hardware configuration file for BLE 
   *                      middleWare.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,

targets/TARGET_STM/TARGET_STM32WB/STM32Cube_FW/hw_if.h

@@ -0,0 +1,250 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    hw_if.h
+  * @author  MCD Application Team
+  * @brief   Hardware Interface
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under Ultimate Liberty license
+  * SLA0044, the "License"; You may not use this file except in compliance with
+  * the License. You may obtain a copy of the License at:
+  *                             www.st.com/SLA0044
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef HW_IF_H
+#define HW_IF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+  /* Includes ------------------------------------------------------------------*/
+#include "stm32wbxx.h"
+#include "stm32wbxx_ll_exti.h"
+#include "stm32wbxx_ll_system.h"
+#include "stm32wbxx_ll_rcc.h"
+#include "stm32wbxx_ll_ipcc.h"
+#include "stm32wbxx_ll_bus.h"
+#include "stm32wbxx_ll_pwr.h"
+#include "stm32wbxx_ll_cortex.h"
+#include "stm32wbxx_ll_utils.h"
+#include "stm32wbxx_ll_hsem.h"
+#include "stm32wbxx_ll_gpio.h"
+#include "stm32wbxx_ll_rtc.h"
+
+#ifdef  USE_STM32WBXX_USB_DONGLE
+#include "stm32wbxx_usb_dongle.h"
+#endif
+#ifdef  USE_STM32WBXX_NUCLEO
+#include "stm32wbxx_nucleo.h"
+#endif
+#ifdef  USE_X_NUCLEO_EPD
+#include "x_nucleo_epd.h"
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+  /******************************************************************************
+   * HW UART
+   ******************************************************************************/
+  typedef enum
+  {
+    hw_uart1,
+    hw_uart2,
+    hw_lpuart1,
+  } hw_uart_id_t;
+
+  typedef enum
+  {
+    hw_uart_ok,
+    hw_uart_error,
+    hw_uart_busy,
+    hw_uart_to,
+  } hw_status_t;
+
+  void HW_UART_Init(hw_uart_id_t hw_uart_id);
+  void HW_UART_Receive_IT(hw_uart_id_t hw_uart_id, uint8_t *pData, uint16_t Size, void (*Callback)(void));
+  void HW_UART_Transmit_IT(hw_uart_id_t hw_uart_id, uint8_t *pData, uint16_t Size,  void (*Callback)(void));
+  hw_status_t HW_UART_Transmit(hw_uart_id_t hw_uart_id, uint8_t *p_data, uint16_t size,  uint32_t timeout);
+  hw_status_t HW_UART_Transmit_DMA(hw_uart_id_t hw_uart_id, uint8_t *p_data, uint16_t size, void (*Callback)(void));
+  void HW_UART_Interrupt_Handler(hw_uart_id_t hw_uart_id);
+  void HW_UART_DMA_Interrupt_Handler(hw_uart_id_t hw_uart_id);
+
+  /******************************************************************************
+   * HW TimerServer
+   ******************************************************************************/
+  /* Exported types ------------------------------------------------------------*/
+  /**
+   * This setting is used when standby mode is supported.
+   * hw_ts_InitMode_Limited should be used when the device restarts from Standby Mode. In that case, the Timer Server does
+   * not re-initialized its context. Only the Hardware register which content has been lost is reconfigured
+   * Otherwise, hw_ts_InitMode_Full should be requested (Start from Power ON) and everything is re-initialized.
+   */
+  typedef enum
+  {
+    hw_ts_InitMode_Full,
+    hw_ts_InitMode_Limited,
+  } HW_TS_InitMode_t;
+
+  /**
+   * When a Timer is created as a SingleShot timer, it is not automatically restarted when the timeout occurs. However,
+   * the timer is kept reserved in the list and could be restarted at anytime with HW_TS_Start()
+   *
+   * When a Timer is created as a Repeated timer, it is automatically restarted when the timeout occurs.
+   */
+  typedef enum
+  {
+    hw_ts_SingleShot,
+    hw_ts_Repeated
+  } HW_TS_Mode_t;
+
+  /**
+   * hw_ts_Successful is returned when a Timer has been successfully created with HW_TS_Create(). Otherwise, hw_ts_Failed
+   * is returned. When hw_ts_Failed is returned, that means there are not enough free slots in the list to create a
+   * Timer. In that case, CFG_HW_TS_MAX_NBR_CONCURRENT_TIMER should be increased
+   */
+  typedef enum
+  {
+    hw_ts_Successful,
+    hw_ts_Failed,
+  }HW_TS_ReturnStatus_t;
+
+  typedef void (*HW_TS_pTimerCb_t)(void);
+
+  /**
+   * @brief  Initialize the timer server
+   *         This API shall be called by the application before any timer is requested to the timer server. It
+   *         configures the RTC module to be connected to the LSI input clock.
+   *
+   * @param  TimerInitMode: When the device restarts from Standby, it should request hw_ts_InitMode_Limited so that the
+   *         Timer context is not re-initialized. Otherwise, hw_ts_InitMode_Full should be requested
+   * @param  hrtc: RTC Handle
+   * @retval None
+   */
+  void HW_TS_Init(HW_TS_InitMode_t TimerInitMode, RTC_HandleTypeDef *hrtc);
+
+  /**
+   * @brief  Interface to create a virtual timer
+   *         The user shall call this API to create a timer. Once created, the timer is reserved to the module until it
+   *         has been deleted. When creating a timer, the user shall specify the mode (single shot or repeated), the
+   *         callback to be notified when the timer expires and a module ID to identify in the timer interrupt handler
+   *         which module is concerned. In return, the user gets a timer ID to handle it.
+   *
+   * @param  TimerProcessID:  This is an identifier provided by the user and returned in the callback to allow
+   *                          identification of the requester
+   * @param  pTimerId: Timer Id returned to the user to request operation (start, stop, delete)
+   * @param  TimerMode: Mode of the virtual timer (Single shot or repeated)
+   * @param  pTimerCallBack: Callback when the virtual timer expires
+   * @retval HW_TS_ReturnStatus_t: Return whether the creation is sucessfull or not
+   */
+  HW_TS_ReturnStatus_t HW_TS_Create(uint32_t TimerProcessID, uint8_t *pTimerId, HW_TS_Mode_t TimerMode, HW_TS_pTimerCb_t pTimerCallBack);
+
+  /**
+   * @brief  Stop a virtual timer
+   *         This API may be used to stop a running timer. A timer which is stopped is move to the pending state.
+   *         A pending timer may be restarted at any time with a different timeout value but the mode cannot be changed.
+   *         Nothing is done when it is called to stop a timer which has been already stopped
+   *
+   * @param  TimerID:  Id of the timer to stop
+   * @retval None
+   */
+  void HW_TS_Stop(uint8_t TimerID);
+
+  /**
+   * @brief  Start a virtual timer
+   *         This API shall be used to start a timer. The timeout value is specified and may be different each time.
+   *         When the timer is in the single shot mode, it will move to the pending state when it expires. The user may
+   *         restart it at any time with a different timeout value. When the timer is in the repeated mode, it always
+   *         stay in the running state. When the timer expires, it will be restarted with the same timeout value.
+   *         This API shall not be called on a running timer.
+   *
+   * @param  TimerID:  The ID Id of the timer to start
+   * @param  timeout_ticks: Number of ticks of the virtual timer (Maximum value is (0xFFFFFFFF-0xFFFF = 0xFFFF0000)
+   * @retval None
+   */
+  void HW_TS_Start(uint8_t TimerID, uint32_t timeout_ticks);
+
+  /**
+   * @brief  Delete a virtual timer from the list
+   *         This API should be used when a timer is not needed anymore by the user. A deleted timer is removed from
+   *         the timer list managed by the timer server. It cannot be restarted again. The user has to go with the
+   *         creation of a new timer if required and may get a different timer id
+   *
+   * @param  TimerID:  The ID of the timer to remove from the list
+   * @retval None
+   */
+  void HW_TS_Delete(uint8_t TimerID);
+
+  /**
+   * @brief  Schedule the timer list on the timer interrupt handler
+   *         This interrupt handler shall be called by the application in the RTC interrupt handler. This handler takes
+   *         care of clearing all status flag required in the RTC and EXTI peripherals
+   *
+   * @param  None
+   * @retval None
+   */
+  void HW_TS_RTC_Wakeup_Handler(void);
+
+  /**
+   * @brief  Return the number of ticks to count before the interrupt
+   *         This API returns the number of ticks left to be counted before an interrupt is generated by the
+   *         Timer Server. This API may be used by the application for power management optimization. When the system
+   *         enters low power mode, the mode selection is a tradeoff between the wakeup time where the CPU is running
+   *         and the time while the CPU will be kept in low power mode before next wakeup. The deeper is the
+   *         low power mode used, the longer is the wakeup time. The low power mode management considering wakeup time
+   *         versus time in low power mode is implementation specific
+   *         When the timer is disabled (No timer in the list), it returns 0xFFFF
+   *
+   * @param  None
+   * @retval The number of ticks left to count
+   */
+  uint16_t HW_TS_RTC_ReadLeftTicksToCount(void);
+
+  /**
+   * @brief  Notify the application that a registered timer has expired
+   *         This API shall be implemented by the user application.
+   *         This API notifies the application that a timer expires. This API is running in the RTC Wakeup interrupt
+   *         context. The application may implement an Operating System to change the context priority where the timer
+   *         callback may be handled. This API provides the module ID to identify which module is concerned and to allow
+   *         sending the information to the correct task
+   *
+   * @param  TimerProcessID: The TimerProcessId associated with the timer when it has been created
+   * @param  TimerID: The TimerID of the expired timer
+   * @param  pTimerCallBack: The Callback associated with the timer when it has been created
+   * @retval None
+   */
+  void HW_TS_RTC_Int_AppNot(uint32_t TimerProcessID, uint8_t TimerID, HW_TS_pTimerCb_t pTimerCallBack);
+
+  /**
+   * @brief  Notify the application that the wakeupcounter has been updated
+   *         This API should be implemented by the user application
+   *         This API notifies the application that the counter has been updated. This is expected to be used along
+   *         with the HW_TS_RTC_ReadLeftTicksToCount () API. It could be that the counter has been updated since the
+   *         last call of HW_TS_RTC_ReadLeftTicksToCount () and before entering low power mode. This notification
+   *         provides a way to the application to solve that race condition to reevaluate the counter value before
+   *         entering low power mode
+   *
+   * @param  None
+   * @retval None
+   */
+  void HW_TS_RTC_CountUpdated_AppNot(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*HW_IF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/