Skip to content

CVM S5 GTL

Jump to bottom
Philip Maechling edited this page May 6, 2022 · 7 revisions

CVM-S5 GTL

CVM-S5 (scientific name is CVM-S4.26) is a tomopgraphy improved version of CVM-S4. The tomography produced a cell-based velocity model with an option GTL that is set off by default. The GTL is enabled in the model/config file. The elygtl can also be added to this model.

The first vertical profile plotted below is at location USC:

  • LAT=34.0224
  • LON=-118.2851
  • STEP=1
  • START_depth=0
  • END_depth=1000

The second plot is for point near Ridgecrest

  • LAT=35.5
  • LON=-117.5

CVM-S5 GTL off

CVM-S5 GTL on

CVM-S5 GTL off elygtl:ely - default z

CVM-S5 GTL off elygtl:ely -z 0,350

CVM-S5 GTL on elygtl:ely - default z

CVM-S5 GTL on elygtl:ely -z 0,350

Shield: CC BY 4.0

This work is licensed under a Creative Commons Attribution 4.0 International License.

CC BY 4.0

UCVM Documentation

  1. Overview and Introduction
  2. Installation
  3. Registered CVMs
    1. Model-Specific-Notes
  4. UCVM Configuration File
  5. Setting the UCVM Environment
  6. Basic UCVM Commands
    1. Query by Elevation or Depth
    2. Ely/Jordan GTL
    3. Plotting Scripts
  7. List of Commands
    1. Manual Pages
    2. Executables
    3. Scripts
    4. Examples
  8. Tutorials
    1. ucvm_query
    2. makegrid.sh
    3. Make-Grid
    4. Adding GTL
    5. Basin-Query
    6. ucvm2mesh
    7. vs30_query
  9. UCVM-Docker
    1. Using-UCVM-Docker
  10. References
  11. UCVM Query Parameters
  12. Model Specific Query Behavior
  13. Model Specific GTLs
  14. System-specific Builds
  15. Model References
  16. Concepts
    1. GitHub Branches
    2. Vs30 Info
    3. UCVM Plotting
    4. C-API
    5. FORTRAN-API
    6. Projections
  17. Test Cases
    1. GTL-Testing
      1. CVM-H GTLs
      2. CVM-S5 GTLs
      3. CVM-S4 GTLs
      4. CVMSI GTLs
      5. CCA GTLs
      6. 1D GTLs
      7. BBP1D GTLs
    2. Other CVM-H-Tests
  18. Earlier Documentation
Clone this wiki locally