Note
Models are adjusted for 0.2mm nozzle.
THQWGD001C by Taro Hayashi is licensed under CC BY 4.0
| Shaft | 1 | THQWGD001C_shaft.stp |
| Spacer | 1 | THQWGD001C_spacer.stp |
| Wheel | 1 | THQWGD001C_wheel.stp |
| Base | 1 | THQWGD001C_base.stp |
| Cover | 1 | THQWGD001C_cover.stp |
| Wheel Encoder | 1 | 11mm |
| Tactile Button | 1 | 6x6x7mm |
| M2 screws | 2 | 5mm or 6mm |
| M2 nuts | 2 |
Note
As clearance is required for mounting, use THQWGD001 (without a click) if two units are to be placed side by side in the same direction
- GitHub https://github.com/Taro-Hayashi/THQWGD001/tree/main/step/THQWGD001
- Printables https://www.printables.com/model/949835-1u-wheel-encoder-thqwgd001
- Maker World https://makerworld.com/en/models/550355#profileId-468693
Note
Models are adjusted for 0.2mm nozzle.
THQWGD001 by Taro Hayashi is licensed under CC BY 4.0
| Wheel | 1 | THQWGD001_wheel.stp |
| Shaft | 1 | THQWGD001_shaft.stp |
| Base | 1 | THQWGD001_base.stp |
| Cover | 1 | THQWGD001_cover.stp |
| Wheel Encoder | 1 | 11mm |
| M2 screws | 2 | 5mm or 6mm |
| M2 nuts | 2 |
