Skip to content

adafruit/Adafruit_Wippersnapper_Arduino

Folders and files

NameName
Last commit message
Last commit date
Mar 18, 2025
Mar 6, 2025
Jan 22, 2025
May 9, 2025
Jun 22, 2021
Jul 2, 2024
Jun 22, 2021
Sep 27, 2022
Jun 27, 2023
Jun 21, 2021
Feb 19, 2025
Apr 4, 2025
Apr 3, 2025
Jul 14, 2023

Repository files navigation

Adafruit WipperSnapper

Build CIDocumentation

Adafruit.io WipperSnapper is a firmware designed to turn any Wi-Fi-capable board into an Internet-of-Things (IoT) device. No programming is required!

WipperSnapper works with multiple microcontroller architectures such as ESP8266, ESP32, ESP32-Sx, ESP32-Cx, RP2040, RP2350, and ATSAMD51.

You will need a free Adafruit IO account to use WipperSnapper.

NOTE: WipperSnapper firmware is in beta and is actively being developed. Please report bugs via the issues page on this repository.

Get Started

Learn how to install and use WipperSnapper by following this guide on the Adafruit Learning System - QuickStart: Adafruit IO WipperSnapper.

Supported Platforms

Platform MCU(s)
ESP32-x ESP32, ESP32-Sx, ESP32-C3
ESP8266 ESP8266
RP2040 RP2040 MCU w/WiFi (i.e: Pico W)
RP2350 RP2350 MCU w/WiFi (i.e: Pico 2W)
ATSAMD SAMD51 MCU w/separate WiFi Co-Processor (i.e: Adafruit "AirLift")

Contributing to Adafruit.io and WipperSnapper

If you have a sensor, input, or output you'd like to add Adafruit IO support for it - we have a guide for contributing a new sensor to Adafruit.io and WipperSnapper here.

If you have a WiFi-enabled development board with a compatible microcontroller (see: "Supported Hardware" section above) and would like to add Adafruit IO support for it - we have a guide for adding a new board to Adafruit.io and WipperSnapper here.

Building WipperSnapper