DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

pzakha · 2021-02-04T23:41:08Z

…messages

… runtime suspended BugLink: https://bugs.launchpad.net/bugs/1906851 Similar to commit 165ae7a ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Cc: <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Acked-by: Sasha Neftin <[email protected]> (cherry picked from commit 0636cd13c6e5e025c95374a78b68c6dc86693fb4 git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue.git dev-queue) Signed-off-by: Kai-Heng Feng <[email protected]> Acked-by: Stefan Bader <[email protected]> Acked-by: Kleber Sacilotto de Souza <[email protected]> Signed-off-by: Ian May <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1908562 [ Upstream commit e773ca7 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Ian May <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910816 commit 190113b upstream. Prarit reported that depending on the affinity setting the ' irq $N: Affinity broken due to vector space exhaustion.' message is showing up in dmesg, but the vector space on the CPUs in the affinity mask is definitely not exhausted. Shung-Hsi provided traces and analysis which pinpoints the problem: The ordering of trying to assign an interrupt vector in assign_irq_vector_any_locked() is simply wrong if the interrupt data has a valid node assigned. It does: 1) Try the intersection of affinity mask and node mask 2) Try the node mask 3) Try the full affinity mask 4) Try the full online mask Obviously #2 and #3 are in the wrong order as the requested affinity mask has to take precedence. In the observed cases #1 failed because the affinity mask did not contain CPUs from node 0. That made it allocate a vector from node 0, thereby breaking affinity and emitting the misleading message. Revert the order of #2 and #3 so the full affinity mask without the node intersection is tried before actually affinity is broken. If no node is assigned then only the full affinity mask and if that fails the full online mask is tried. Fixes: d6ffc6a ("x86/vector: Respect affinity mask in irq descriptor") Reported-by: Prarit Bhargava <[email protected]> Reported-by: Shung-Hsi Yu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Shung-Hsi Yu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910816 commit e91d8d7 upstream. While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/[email protected] Fixes: e47110e ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by: Minchan Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Harish Sriram <[email protected]> Cc: Uladzislau Rezki <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…d ops BugLink: https://bugs.launchpad.net/bugs/1910822 [ Upstream commit 52719fc ] There are three ways pseries_suspend_begin() can be reached: 1. When "mem" is written to /sys/power/state: kobj_attr_store() -> state_store() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This never works because there is no way to supply a valid stream id using this interface, and H_VASI_STATE is called with a stream id of zero. So this call path is useless at best. 2. When a stream id is written to /sys/devices/system/power/hibernate. pseries_suspend_begin() is polled directly from store_hibernate() until the stream is in the "Suspending" state (i.e. the platform is ready for the OS to suspend execution): dev_attr_store() -> store_hibernate() -> pseries_suspend_begin() 3. When a stream id is written to /sys/devices/system/power/hibernate (continued). After #2, pseries_suspend_begin() is called once again from the pm core: dev_attr_store() -> store_hibernate() -> pm_suspend() -> suspend_devices_and_enter() -> pseries_suspend_begin() This is redundant because the VASI suspend state is already known to be Suspending. The begin() callback of platform_suspend_ops is optional, so we can simply remove that assignment with no loss of function. Fixes: 32d8ad4 ("powerpc/pseries: Partition hibernation support") Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1910822 [ Upstream commit 4a9d81c ] If the elem is deleted during be iterated on it, the iteration process will fall into an endless loop. kernel: NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [nfsd:17137] PID: 17137 TASK: ffff8818d93c0000 CPU: 4 COMMAND: "nfsd" [exception RIP: __state_in_grace+76] RIP: ffffffffc00e817c RSP: ffff8818d3aefc98 RFLAGS: 00000246 RAX: ffff881dc0c38298 RBX: ffffffff81b03580 RCX: ffff881dc02c9f50 RDX: ffff881e3fce8500 RSI: 0000000000000001 RDI: ffffffff81b03580 RBP: ffff8818d3aefca0 R8: 0000000000000020 R9: ffff8818d3aefd40 R10: ffff88017fc03800 R11: ffff8818e83933c0 R12: ffff8818d3aefd40 R13: 0000000000000000 R14: ffff8818e8391068 R15: ffff8818fa6e4000 CS: 0010 SS: 0018 #0 [ffff8818d3aefc98] opens_in_grace at ffffffffc00e81e3 [grace] #1 [ffff8818d3aefca8] nfs4_preprocess_stateid_op at ffffffffc02a3e6c [nfsd] #2 [ffff8818d3aefd18] nfsd4_write at ffffffffc028ed5b [nfsd] #3 [ffff8818d3aefd80] nfsd4_proc_compound at ffffffffc0290a0d [nfsd] #4 [ffff8818d3aefdd0] nfsd_dispatch at ffffffffc027b800 [nfsd] #5 [ffff8818d3aefe08] svc_process_common at ffffffffc02017f3 [sunrpc] #6 [ffff8818d3aefe70] svc_process at ffffffffc0201ce3 [sunrpc] #7 [ffff8818d3aefe98] nfsd at ffffffffc027b117 [nfsd] #8 [ffff8818d3aefec8] kthread at ffffffff810b88c1 #9 [ffff8818d3aeff50] ret_from_fork at ffffffff816d1607 The troublemake elem: crash> lock_manager ffff881dc0c38298 struct lock_manager { list = { next = 0xffff881dc0c38298, prev = 0xffff881dc0c38298 }, block_opens = false } Fixes: c87fb4a ("lockd: NLM grace period shouldn't block NFSv4 opens") Signed-off-by: Cheng Lin <[email protected]> Signed-off-by: Yi Wang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1915186 [ Upstream commit b774134 ] The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028 ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: William Breathitt Gray <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1915195 commit fb28610 upstream. While testing the error paths of relocation I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc6+ #217 Not tainted ------------------------------------------------------ mount/779 is trying to acquire lock: ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340 but task is already holding lock: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-root-00){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x462/0x8f0 btrfs_update_root+0x55/0x2b0 btrfs_drop_snapshot+0x398/0x750 clean_dirty_subvols+0xdf/0x120 btrfs_recover_relocation+0x534/0x5a0 btrfs_start_pre_rw_mount+0xcb/0x170 open_ctree+0x151f/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (sb_internal#2){.+.+}-{0:0}: start_transaction+0x444/0x700 insert_balance_item.isra.0+0x37/0x320 btrfs_balance+0x354/0xf40 btrfs_ioctl_balance+0x2cf/0x380 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}: __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 __mutex_lock+0x7e/0x7b0 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(sb_internal#2); lock(btrfs-root-00); lock(&fs_info->balance_mutex); *** DEADLOCK *** 2 locks held by mount/779: #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 stack backtrace: CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ #217 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 ? btrfs_recover_balance+0x2f0/0x340 __mutex_lock+0x7e/0x7b0 ? btrfs_recover_balance+0x2f0/0x340 ? btrfs_recover_balance+0x2f0/0x340 ? rcu_read_lock_sched_held+0x3f/0x80 ? kmem_cache_alloc_trace+0x2c4/0x2f0 ? btrfs_get_64+0x5e/0x100 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea ? rcu_read_lock_sched_held+0x3f/0x80 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? __kmalloc_track_caller+0x2f2/0x320 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 ? capable+0x3a/0x60 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is straightforward to fix, simply release the path before we setup the balance_ctl. CC: [email protected] # 4.4+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: William Breathitt Gray <[email protected]>

…messages (delphix#2)

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/1916061 commit b25b0b8 upstream. With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: ethanwu <[email protected]> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918167 [ Upstream commit 3f618ab ] When building with KASAN and LKDTM, clang may implictly generate an asan.module_ctor function in the LKDTM rodata object. The Makefile moves the lkdtm_rodata_do_nothing() function into .rodata by renaming the file's .text section to .rodata, and consequently also moves the ctor function into .rodata, leading to a boot time crash (splat below) when the ctor is invoked by do_ctors(). Let's prevent this by marking the function as noinstr rather than notrace, and renaming the file's .noinstr.text to .rodata. Marking the function as noinstr will prevent tracing and kprobes, and will inhibit any undesireable compiler instrumentation. The ctor function (if any) will be placed in .text and will work correctly. Example splat before this patch is applied: [ 0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac [ 0.922088] Mem abort info: [ 0.922828] ESR = 0x8600000e [ 0.923635] EC = 0x21: IABT (current EL), IL = 32 bits [ 0.925036] SET = 0, FnV = 0 [ 0.925838] EA = 0, S1PTW = 0 [ 0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000 [ 0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01 [ 0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP [ 0.932806] Modules linked in: [ 0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2 [ 0.935620] Hardware name: linux,dummy-virt (DT) [ 0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--) [ 0.938609] pc : asan.module_ctor+0x0/0x14 [ 0.939759] lr : do_basic_setup+0x4c/0x70 [ 0.940889] sp : ffff27b600177e30 [ 0.941815] x29: ffff27b600177e30 x28: 0000000000000000 [ 0.943306] x27: 0000000000000000 x26: 0000000000000000 [ 0.944803] x25: 0000000000000000 x24: 0000000000000000 [ 0.946289] x23: 0000000000000001 x22: 0000000000000000 [ 0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0 [ 0.949271] x19: ffffa0006bef9358 x18: 0000000000000068 [ 0.950756] x17: fffffffffffffff8 x16: 0000000000000000 [ 0.952246] x15: 0000000000000000 x14: 0000000000000000 [ 0.953734] x13: 00000000838a16d5 x12: 0000000000000001 [ 0.955223] x11: ffff94000da74041 x10: dfffa00000000000 [ 0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac [ 0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f [ 0.959683] x5 : 0000000000000040 x4 : 0000000000000000 [ 0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005 [ 0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350 [ 0.964155] Call trace: [ 0.964844] asan.module_ctor+0x0/0x14 [ 0.965895] kernel_init_freeable+0x158/0x198 [ 0.967115] kernel_init+0x14/0x19c [ 0.968104] ret_from_fork+0x10/0x30 [ 0.969110] Code: 00000003 00000000 00000000 00000000 (00000000) [ 0.970815] ---[ end trace b5339784e20d015c ]--- Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Kees Cook <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit eaba3b2 ] Unprivileged user can crash kernel by using DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC ioctl. This was reported by trinity[1] fuzzer. [ 71.073906] nouveau 0000:01:00.0: crashme[1329]: channel failed to initialise, -17 [ 71.081730] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 71.088928] #PF: supervisor read access in kernel mode [ 71.094059] #PF: error_code(0x0000) - not-present page [ 71.099189] PGD 119590067 P4D 119590067 PUD 1054f5067 PMD 0 [ 71.104842] Oops: 0000 [#1] SMP NOPTI [ 71.108498] CPU: 2 PID: 1329 Comm: crashme Not tainted 5.8.0-rc6+ #2 [ 71.114993] Hardware name: AMD Pike/Pike, BIOS RPK1506A 09/03/2014 [ 71.121213] RIP: 0010:nouveau_abi16_ioctl_channel_alloc+0x108/0x380 [nouveau] [ 71.128339] Code: 48 89 9d f0 00 00 00 41 8b 4c 24 04 41 8b 14 24 45 31 c0 4c 8d 4b 10 48 89 ee 4c 89 f7 e8 10 11 00 00 85 c0 75 78 48 8b 43 10 <8b> 90 a0 00 00 00 41 89 54 24 08 80 7d 3d 05 0f 86 bb 01 00 00 41 [ 71.147074] RSP: 0018:ffffb4a1809cfd38 EFLAGS: 00010246 [ 71.152526] RAX: 0000000000000000 RBX: ffff98cedbaa1d20 RCX: 00000000000003bf [ 71.159651] RDX: 00000000000003be RSI: 0000000000000000 RDI: 0000000000030160 [ 71.166774] RBP: ffff98cee776de00 R08: ffffdc0144198a08 R09: ffff98ceeefd4000 [ 71.173901] R10: ffff98cee7e81780 R11: 0000000000000001 R12: ffffb4a1809cfe08 [ 71.181214] R13: ffff98cee776d000 R14: ffff98cec519e000 R15: ffff98cee776def0 [ 71.188339] FS: 00007fd926250500(0000) GS:ffff98ceeac80000(0000) knlGS:0000000000000000 [ 71.196418] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.202155] CR2: 00000000000000a0 CR3: 0000000106622000 CR4: 00000000000406e0 [ 71.209297] Call Trace: [ 71.211777] ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau] [ 71.218053] drm_ioctl_kernel+0xac/0xf0 [drm] [ 71.222421] drm_ioctl+0x211/0x3c0 [drm] [ 71.226379] ? nouveau_abi16_ioctl_getparam+0x1f0/0x1f0 [nouveau] [ 71.232500] nouveau_drm_ioctl+0x57/0xb0 [nouveau] [ 71.237285] ksys_ioctl+0x86/0xc0 [ 71.240595] __x64_sys_ioctl+0x16/0x20 [ 71.244340] do_syscall_64+0x4c/0x90 [ 71.248110] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 71.253162] RIP: 0033:0x7fd925d4b88b [ 71.256731] Code: Bad RIP value. [ 71.259955] RSP: 002b:00007ffc743592d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 71.267514] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd925d4b88b [ 71.274637] RDX: 0000000000601080 RSI: 00000000c0586442 RDI: 0000000000000003 [ 71.281986] RBP: 00007ffc74359340 R08: 00007fd926016ce0 R09: 00007fd926016ce0 [ 71.289111] R10: 0000000000000003 R11: 0000000000000206 R12: 0000000000400620 [ 71.296235] R13: 00007ffc74359420 R14: 0000000000000000 R15: 0000000000000000 [ 71.303361] Modules linked in: rfkill sunrpc snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep kvm_amd snd_seq ccp snd_seq_device snd_pcm kvm snd_timer snd irqbypass soundcore sp5100_tco pcspkr crct10dif_pclmul crc32_pclmul ghash_clmulni_intel wmi_bmof joydev i2c_piix4 fam15h_power k10temp acpi_cpufreq ip_tables xfs libcrc32c sd_mod t10_pi sg nouveau video mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm broadcom bcm_phy_lib ata_generic ahci drm e1000 crc32c_intel libahci serio_raw tg3 libata firewire_ohci firewire_core wmi crc_itu_t dm_mirror dm_region_hash dm_log dm_mod [ 71.365269] CR2: 00000000000000a0 simplified reproducer ---------------------------------8<---------------------------------------- /* * gcc -o crashme crashme.c * ./crashme /dev/dri/renderD128 */ struct drm_nouveau_channel_alloc { uint32_t fb_ctxdma_handle; uint32_t tt_ctxdma_handle; int channel; uint32_t pushbuf_domains; /* Notifier memory */ uint32_t notifier_handle; /* DRM-enforced subchannel assignments */ struct { uint32_t handle; uint32_t grclass; } subchan[8]; uint32_t nr_subchan; }; static struct drm_nouveau_channel_alloc channel; int main(int argc, char *argv[]) { int fd; int rv; if (argc != 2) die("usage: %s <dev>", 0, argv[0]); if ((fd = open(argv[1], O_RDONLY)) == -1) die("open %s", errno, argv[1]); if (ioctl(fd, DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC, &channel) == -1 && errno == EACCES) die("ioctl %s", errno, argv[1]); close(fd); printf("PASS\n"); return 0; } ---------------------------------8<---------------------------------------- [1] https://github.com/kernelslacker/trinity Fixes: eeaf06a ("drm/nouveau/svm: initial support for shared virtual memory") Signed-off-by: Frantisek Hrbata <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit 661f385 ] During connection setup, the application may choose to zero-size inbound and outbound READ queues, as well as the Receive queue. This patch fixes handling of zero-sized queues, but not prevents it. Kamal Heib says in an initial error report: When running the blktests over siw the following shift-out-of-bounds is reported, this is happening because the passed IRD or ORD from the ulp could be zero which will lead to unexpected behavior when calling roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD. UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x99/0xcb ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3 ? down_write+0x183/0x3d0 siw_qp_modify.cold.8+0x2d/0x32 [siw] ? __local_bh_enable_ip+0xa5/0xf0 siw_accept+0x906/0x1b60 [siw] ? xa_load+0x147/0x1f0 ? siw_connect+0x17a0/0x17a0 [siw] ? lock_downgrade+0x700/0x700 ? siw_get_base_qp+0x1c2/0x340 [siw] ? _raw_spin_unlock_irqrestore+0x39/0x40 iw_cm_accept+0x1f4/0x430 [iw_cm] rdma_accept+0x3fa/0xb10 [rdma_cm] ? check_flush_dependency+0x410/0x410 ? cma_rep_recv+0x570/0x570 [rdma_cm] nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma] ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma] ? lock_release+0x56e/0xcc0 ? lock_downgrade+0x700/0x700 ? lock_downgrade+0x700/0x700 ? __xa_alloc_cyclic+0xef/0x350 ? __xa_alloc+0x2d0/0x2d0 ? rdma_restrack_add+0xbe/0x2c0 [ib_core] ? __ww_mutex_die+0x190/0x190 cma_cm_event_handler+0xf2/0x500 [rdma_cm] iw_conn_req_handler+0x910/0xcb0 [rdma_cm] ? _raw_spin_unlock_irqrestore+0x39/0x40 ? trace_hardirqs_on+0x1c/0x150 ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm] ? __kasan_kmalloc.constprop.7+0xc1/0xd0 cm_work_handler+0x121c/0x17a0 [iw_cm] ? iw_cm_reject+0x190/0x190 [iw_cm] ? trace_hardirqs_on+0x1c/0x150 process_one_work+0x8fb/0x16c0 ? pwq_dec_nr_in_flight+0x320/0x320 worker_thread+0x87/0xb40 ? __kthread_parkme+0xd1/0x1a0 ? process_one_work+0x16c0/0x16c0 kthread+0x35f/0x430 ? kthread_mod_delayed_work+0x180/0x180 ret_from_fork+0x22/0x30 Fixes: a531975 ("rdma/siw: main include file") Fixes: f29dd55 ("rdma/siw: queue pair methods") Fixes: 8b6a361 ("rdma/siw: receive path") Fixes: b9be6f1 ("rdma/siw: transmit path") Fixes: 303ae1c ("rdma/siw: application interface") Link: https://lore.kernel.org/r/[email protected] Reported-by: Kamal Heib <[email protected]> Reported-by: Yi Zhang <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit 429fa96 ] The size of tx_valid_cpus was calculated under the assumption that the numa nodes identifiers are continuous, which is not the case in all archs as this could lead to the following panic when trying to access an invalid tx_valid_cpus index, avoid the following panic by using nr_node_ids instead of num_online_nodes() to allocate the tx_valid_cpus size. Kernel attempted to read user page (8) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000008 Faulting instruction address: 0xc0080000081b4a90 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: siw(+) rfkill rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm sunrpc ib_umad rdma_cm ib_cm iw_cm i40iw ib_uverbs ib_core i40e ses enclosure scsi_transport_sas ipmi_powernv ibmpowernv at24 ofpart ipmi_devintf regmap_i2c ipmi_msghandler powernv_flash uio_pdrv_genirq uio mtd opal_prd zram ip_tables xfs libcrc32c sd_mod t10_pi ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm vmx_crypto aacraid drm_panel_orientation_quirks dm_mod CPU: 40 PID: 3279 Comm: modprobe Tainted: G W X --------- --- 5.11.0-0.rc4.129.eln108.ppc64le #2 NIP: c0080000081b4a90 LR: c0080000081b4a2c CTR: c0000000007ce1c0 REGS: c000000027fa77b0 TRAP: 0300 Tainted: G W X --------- --- (5.11.0-0.rc4.129.eln108.ppc64le) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 44224882 XER: 00000000 CFAR: c0000000007ce200 DAR: 0000000000000008 DSISR: 40000000 IRQMASK: 0 GPR00: c0080000081b4a2c c000000027fa7a50 c0080000081c3900 0000000000000040 GPR04: c000000002023080 c000000012e1c300 000020072ad70000 0000000000000001 GPR08: c000000001726068 0000000000000008 0000000000000008 c0080000081b5758 GPR12: c0000000007ce1c0 c0000007fffc3000 00000001590b1e40 0000000000000000 GPR16: 0000000000000000 0000000000000001 000000011ad68fc8 00007fffcc09c5c8 GPR20: 0000000000000008 0000000000000000 00000001590b2850 00000001590b1d30 GPR24: 0000000000043d68 000000011ad67a80 000000011ad67a80 0000000000100000 GPR28: c000000012e1c300 c0000000020271c8 0000000000000001 c0080000081bf608 NIP [c0080000081b4a90] siw_init_cpulist+0x194/0x214 [siw] LR [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] Call Trace: [c000000027fa7a50] [c0080000081b4a2c] siw_init_cpulist+0x130/0x214 [siw] (unreliable) [c000000027fa7a90] [c0080000081b4e68] siw_init_module+0x40/0x2a0 [siw] [c000000027fa7b30] [c0000000000124f4] do_one_initcall+0x84/0x2e0 [c000000027fa7c00] [c000000000267ffc] do_init_module+0x7c/0x350 [c000000027fa7c90] [c00000000026a180] __do_sys_init_module+0x210/0x250 [c000000027fa7db0] [c0000000000387e4] system_call_exception+0x134/0x230 [c000000027fa7e10] [c00000000000d660] system_call_common+0xf0/0x27c Instruction dump: 40810044 3d420000 e8bf0000 e88a82d0 3d420000 e90a82c8 792a1f24 7cc4302a 7d2642aa 79291f24 7d25482a 7d295214 <7d4048a8> 7d4a3b78 7d4049ad 40c2fff4 Fixes: bdcf26b ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kamal Heib <[email protected]> Reviewed-by: Bernard Metzler <[email protected]> Tested-by: Yi Zhang <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1918974 [ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Kelsey Skunberg <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/1923214 commit a7889c6 upstream. afs_listxattr() lists all the available special afs xattrs (i.e. those in the "afs.*" space), no matter what type of server we're dealing with. But OpenAFS servers, for example, cannot deal with some of the extra-capable attributes that AuriStor (YFS) servers provide. Unfortunately, the presence of the afs.yfs.* attributes causes errors[1] for anything that tries to read them if the server is of the wrong type. Fix the problem by removing afs_listxattr() so that none of the special xattrs are listed (AFS doesn't support xattrs). It does mean, however, that getfattr won't list them, though they can still be accessed with getxattr() and setxattr(). This can be tested with something like: getfattr -d -m ".*" /afs/example.com/path/to/file With this change, none of the afs.* attributes should be visible. Changes: ver #2: - Hide all of the afs.* xattrs, not just the ACL ones. Fixes: ae46578 ("afs: Get YFS ACLs and information through xattrs") Reported-by: Gaja Sophie Peters <[email protected]> Signed-off-by: David Howells <[email protected]> Tested-by: Gaja Sophie Peters <[email protected]> Reviewed-by: Jeffrey Altman <[email protected]> Reviewed-by: Marc Dionne <[email protected]> cc: [email protected] Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1] Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1 Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2 Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1923214 commit c7de87f upstream. [ This problem is in mainline, but only rt has the chops to be able to detect it. ] Lockdep reports a circular lock dependency between serv->sv_lock and softirq_ctl.lock on system shutdown, when using a kernel built with CONFIG_PREEMPT_RT=y, and a nfs mount exists. This is due to the definition of spin_lock_bh on rt: local_bh_disable(); rt_spin_lock(lock); which forces a softirq_ctl.lock -> serv->sv_lock dependency. This is not a problem as long as _every_ lock of serv->sv_lock is a: spin_lock_bh(&serv->sv_lock); but there is one of the form: spin_lock(&serv->sv_lock); This is what is causing the circular dependency splat. The spin_lock() grabs the lock without first grabbing softirq_ctl.lock via local_bh_disable. If later on in the critical region, someone does a local_bh_disable, we get a serv->sv_lock -> softirq_ctrl.lock dependency established. Deadlock. Fix is to make serv->sv_lock be locked with spin_lock_bh everywhere, no exceptions. [ OK ] Stopped target NFS client services. Stopping Logout off all iSCSI sessions on shutdown... Stopping NFS server and services... [ 109.442380] [ 109.442385] ====================================================== [ 109.442386] WARNING: possible circular locking dependency detected [ 109.442387] 5.10.16-rt30 #1 Not tainted [ 109.442389] ------------------------------------------------------ [ 109.442390] nfsd/1032 is trying to acquire lock: [ 109.442392] ffff994237617f60 ((softirq_ctrl.lock).lock){+.+.}-{2:2}, at: __local_bh_disable_ip+0xd9/0x270 [ 109.442405] [ 109.442405] but task is already holding lock: [ 109.442406] ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90 [ 109.442415] [ 109.442415] which lock already depends on the new lock. [ 109.442415] [ 109.442416] [ 109.442416] the existing dependency chain (in reverse order) is: [ 109.442417] [ 109.442417] -> #1 (&serv->sv_lock){+.+.}-{0:0}: [ 109.442421] rt_spin_lock+0x2b/0xc0 [ 109.442428] svc_add_new_perm_xprt+0x42/0xa0 [ 109.442430] svc_addsock+0x135/0x220 [ 109.442434] write_ports+0x4b3/0x620 [ 109.442438] nfsctl_transaction_write+0x45/0x80 [ 109.442440] vfs_write+0xff/0x420 [ 109.442444] ksys_write+0x4f/0xc0 [ 109.442446] do_syscall_64+0x33/0x40 [ 109.442450] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 109.442454] [ 109.442454] -> #0 ((softirq_ctrl.lock).lock){+.+.}-{2:2}: [ 109.442457] __lock_acquire+0x1264/0x20b0 [ 109.442463] lock_acquire+0xc2/0x400 [ 109.442466] rt_spin_lock+0x2b/0xc0 [ 109.442469] __local_bh_disable_ip+0xd9/0x270 [ 109.442471] svc_xprt_do_enqueue+0xc0/0x4d0 [ 109.442474] svc_close_list+0x60/0x90 [ 109.442476] svc_close_net+0x49/0x1a0 [ 109.442478] svc_shutdown_net+0x12/0x40 [ 109.442480] nfsd_destroy+0xc5/0x180 [ 109.442482] nfsd+0x1bc/0x270 [ 109.442483] kthread+0x194/0x1b0 [ 109.442487] ret_from_fork+0x22/0x30 [ 109.442492] [ 109.442492] other info that might help us debug this: [ 109.442492] [ 109.442493] Possible unsafe locking scenario: [ 109.442493] [ 109.442493] CPU0 CPU1 [ 109.442494] ---- ---- [ 109.442495] lock(&serv->sv_lock); [ 109.442496] lock((softirq_ctrl.lock).lock); [ 109.442498] lock(&serv->sv_lock); [ 109.442499] lock((softirq_ctrl.lock).lock); [ 109.442501] [ 109.442501] *** DEADLOCK *** [ 109.442501] [ 109.442501] 3 locks held by nfsd/1032: [ 109.442503] #0: ffffffff93b49258 (nfsd_mutex){+.+.}-{3:3}, at: nfsd+0x19a/0x270 [ 109.442508] #1: ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90 [ 109.442512] #2: ffffffff93a81b20 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0x5/0xc0 [ 109.442518] [ 109.442518] stack backtrace: [ 109.442519] CPU: 0 PID: 1032 Comm: nfsd Not tainted 5.10.16-rt30 #1 [ 109.442522] Hardware name: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.2 09/22/2015 [ 109.442524] Call Trace: [ 109.442527] dump_stack+0x77/0x97 [ 109.442533] check_noncircular+0xdc/0xf0 [ 109.442546] __lock_acquire+0x1264/0x20b0 [ 109.442553] lock_acquire+0xc2/0x400 [ 109.442564] rt_spin_lock+0x2b/0xc0 [ 109.442570] __local_bh_disable_ip+0xd9/0x270 [ 109.442573] svc_xprt_do_enqueue+0xc0/0x4d0 [ 109.442577] svc_close_list+0x60/0x90 [ 109.442581] svc_close_net+0x49/0x1a0 [ 109.442585] svc_shutdown_net+0x12/0x40 [ 109.442588] nfsd_destroy+0xc5/0x180 [ 109.442590] nfsd+0x1bc/0x270 [ 109.442595] kthread+0x194/0x1b0 [ 109.442600] ret_from_fork+0x22/0x30 [ 109.518225] nfsd: last server has exited, flushing export cache [ OK ] Stopped NFSv4 ID-name mapping service. [ OK ] Stopped GSSAPI Proxy Daemon. [ OK ] Stopped NFS Mount Daemon. [ OK ] Stopped NFS status monitor for NFSv2/3 locking.. Fixes: 719f8bc ("svcrpc: fix xpt_list traversal locking on shutdown") Signed-off-by: Joe Korty <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1923220 [ Upstream commit 4deb550 ] label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen. In order to fix this issue, don't call phy->stop() in label err_eni_release [ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ================================================================== Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1926489 commit 90bd070 upstream. The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [[email protected]: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>

Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation. Fixes: 7b0a0e3 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Lin Ma <[email protected]> Suggested-by: Cengiz Can <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> CVE-2024-56663 (cherry picked from commit 2e3dbf938656986cce73ac4083500d0bcfbffe24) Signed-off-by: Massimiliano Pellizzer <[email protected]> Acked-by: Stewart Hore <[email protected]> Acked-by: Koichiro Den <[email protected]> Signed-off-by: Koichiro Den <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2095283 [ Upstream commit 953e549471cabc9d4980f1da2e9fa79f4c23da06 ] Lockdep gives a false positive splat as it can't distinguish the lock which is taken by different IRQ descriptors from different IRQ chips that are organized in a way of a hierarchy: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W ------------------------------------------------------ modprobe/141 is trying to acquire lock: ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90 but task is already holding lock: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 which lock already depends on the new lock. -> #3 (&d->lock){+.+.}-{4:4}: -> #2 (&desc->request_mutex){+.+.}-{4:4}: -> #1 (ipclock){+.+.}-{4:4}: -> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}: Chain exists of: intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&d->lock); lock(&desc->request_mutex); lock(&d->lock); lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock); *** DEADLOCK *** 3 locks held by modprobe/141: #0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250 #1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790 #2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790 Set a lockdep class when we map the IRQ so that it doesn't warn about a lockdep bug that doesn't exist. Fixes: 4af8be6 ("regmap: Convert regmap_irq to use irq_domain") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Koichiro Den <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2095283 [ Upstream commit 06dbbb4d5f7126b6307ab807cbf04ecfc459b933 ] copy_from_kernel_nofault() can be called when doing read of /proc/kcore. /proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults. Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault(). This can be easily triggered if someone tries to do dd from /proc/kcore. eg. dd if=/proc/kcore of=/dev/null bs=1M Some example false negatives: =============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000: copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2): copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec Fixes: 90cbac0 ("powerpc: Enable KFENCE for PPC32") Suggested-by: Christophe Leroy <[email protected]> Reported-by: Disha Goel <[email protected]> Signed-off-by: Ritesh Harjani (IBM) <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://patch.msgid.link/a411788081d50e3b136c6270471e35aba3dfafa3.1729271995.git.ritesh.list@gmail.com Signed-off-by: Sasha Levin <[email protected]> CVE-2024-56678 Signed-off-by: Koichiro Den <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2095283 [ Upstream commit cadae3a45d23aa4f6485938a67cbc47aaaa25e38 ] The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because the code calls kmalloc() while holding it, which can sleep: # echo 1 > /proc/powerpc/vcpudispatch_stats BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh preempt_count: 1, expected: 0 3 locks held by sh/199: #0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438 #1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4 #2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4 CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace: dump_stack_lvl+0x130/0x148 (unreliable) __might_resched+0x174/0x410 kmem_cache_alloc_noprof+0x340/0x3d0 alloc_dtl_buffers+0x124/0x1ac vcpudispatch_stats_write+0x2a8/0x5f4 proc_reg_write+0xf4/0x150 vfs_write+0xfc/0x438 ksys_write+0x88/0x148 system_call_exception+0x1c4/0x5a0 system_call_common+0xf4/0x258 Fixes: 06220d7 ("powerpc/pseries: Introduce rwlock to gatekeep DTLB usage") Tested-by: Kajol Jain <[email protected]> Reviewed-by: Nysal Jan K.A <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]> CVE-2024-56701 Signed-off-by: Koichiro Den <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2095283 [ Upstream commit 542ed8145e6f9392e3d0a86a0e9027d2ffd183e4 ] Access to genmask field in struct nft_set_ext results in unaligned atomic read: [ 72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c [ 72.131036] Mem abort info: [ 72.131213] ESR = 0x0000000096000021 [ 72.131446] EC = 0x25: DABT (current EL), IL = 32 bits [ 72.132209] SET = 0, FnV = 0 [ 72.133216] EA = 0, S1PTW = 0 [ 72.134080] FSC = 0x21: alignment fault [ 72.135593] Data abort info: [ 72.137194] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 [ 72.142351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 72.145989] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000 [ 72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403, +pte=0068000102bb7707 [ 72.163021] Internal error: Oops: 0000000096000021 [#1] SMP [...] [ 72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G E 6.13.0-rc3+ #2 [ 72.170509] Tainted: [E]=UNSIGNED_MODULE [ 72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023 [ 72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables] [ 72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables] [ 72.172546] sp : ffff800081f2bce0 [ 72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038 [ 72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78 [ 72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78 [ 72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000 [ 72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978 [ 72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0 [ 72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000 [ 72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000 [ 72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000 [ 72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004 [ 72.176207] Call trace: [ 72.176316] nft_rhash_gc+0x200/0x2d8 [nf_tables] (P) [ 72.176653] process_one_work+0x178/0x3d0 [ 72.176831] worker_thread+0x200/0x3f0 [ 72.176995] kthread+0xe8/0xf8 [ 72.177130] ret_from_fork+0x10/0x20 [ 72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f) [ 72.177557] ---[ end trace 0000000000000000 ]--- Align struct nft_set_ext to word size to address this and documentation it. pahole reports that this increases the size of elements for rhash and pipapo in 8 bytes on x86_64. Fixes: 7ffc7481153b ("netfilter: nft_set_hash: skip duplicated elements pending gc run") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit 277f00b0c2dca8794cf4837722960bdc4174911f linux-5.15.y) [koichiroden: pulled in follow-up fix from v5.15.176] Signed-off-by: Koichiro Den <[email protected]>

…le_direct_reclaim() BugLink: https://bugs.launchpad.net/bugs/2095327 commit 6aaced5abd32e2a57cd94fd64f824514d0361da8 upstream. The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> CVE-2024-57884 Signed-off-by: Koichiro Den <[email protected]>

…messages (#2)

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit be7a6a77669588bfa5022a470989702bbbb11e7f ] It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always be set by the server, so the client must handle any values and then prevent oopses like below from happening: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48 89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8 e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89 c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24 RSP: 0018:ffffc90001817be0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99 RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228 RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200 R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58 FS: 00007fe27119e740(0000) GS:ffff888148600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0x159/0x1b0 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? do_error_trap+0x90/0x130 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? exc_divide_error+0x39/0x50 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? asm_exc_divide_error+0x1a/0x20 ? cifs_debug_data_proc_show+0xa39/0x1460 [cifs] ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? seq_read_iter+0x42e/0x790 seq_read_iter+0x19a/0x790 proc_reg_read_iter+0xbe/0x110 ? __pfx_proc_reg_read_iter+0x10/0x10 vfs_read+0x469/0x570 ? do_user_addr_fault+0x398/0x760 ? __pfx_vfs_read+0x10/0x10 ? find_held_lock+0x8a/0xa0 ? __pfx_lock_release+0x10/0x10 ksys_read+0xd3/0x170 ? __pfx_ksys_read+0x10/0x10 ? __rcu_read_unlock+0x50/0x270 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe271288911 Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911 RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003 RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000 </TASK> Fix this by setting cifs_server_iface::speed to a sane value (1Gbps) by default when link speed is unset. Cc: Shyam Prasad N <[email protected]> Cc: Tom Talpey <[email protected]> Fixes: a6d8fb5 ("cifs: distribute channels across interfaces based on speed") Reported-by: Frank Sorenson <[email protected]> Reported-by: Jay Shin <[email protected]> Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit c7b87ce0dd10b64b68a0b22cb83bbd556e28fe81 ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit 58f038e6d209d2dd862fcf5de55407855856794d ] During the update procedure, when overwrite element in a pre-allocated htab, the freeing of old_element is protected by the bucket lock. The reason why the bucket lock is necessary is that the old_element has already been stashed in htab->extra_elems after alloc_htab_elem() returns. If freeing the old_element after the bucket lock is unlocked, the stashed element may be reused by concurrent update procedure and the freeing of old_element will run concurrently with the reuse of the old_element. However, the invocation of check_and_free_fields() may acquire a spin-lock which violates the lockdep rule because its caller has already held a raw-spin-lock (bucket lock). The following warning will be reported when such race happens: BUG: scheduling while atomic: test_progs/676/0x00000003 3 locks held by test_progs/676: #0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830 #1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500 #2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0 Modules linked in: bpf_testmod(O) Preemption disabled at: [<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500 CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11 Tainted: [W]=WARN, [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 __schedule_bug+0x120/0x170 __schedule+0x300c/0x4800 schedule_rtlock+0x37/0x60 rtlock_slowlock_locked+0x6d9/0x54c0 rt_spin_lock+0x168/0x230 hrtimer_cancel_wait_running+0xe9/0x1b0 hrtimer_cancel+0x24/0x30 bpf_timer_delete_work+0x1d/0x40 bpf_timer_cancel_and_free+0x5e/0x80 bpf_obj_free_fields+0x262/0x4a0 check_and_free_fields+0x1d0/0x280 htab_map_update_elem+0x7fc/0x1500 bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43 bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e bpf_prog_test_run_syscall+0x322/0x830 __sys_bpf+0x135d/0x3ca0 __x64_sys_bpf+0x75/0xb0 x64_sys_call+0x1b5/0xa10 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... </TASK> It seems feasible to break the reuse and refill of per-cpu extra_elems into two independent parts: reuse the per-cpu extra_elems with bucket lock being held and refill the old_element as per-cpu extra_elems after the bucket lock is unlocked. However, it will make the concurrent overwrite procedures on the same CPU return unexpected -E2BIG error when the map is full. Therefore, the patch fixes the lock problem by breaking the cancelling of bpf_timer into two steps for PREEMPT_RT: 1) use hrtimer_try_to_cancel() and check its return value 2) if the timer is running, use hrtimer_cancel() through a kworker to cancel it again Considering that the current implementation of hrtimer_cancel() will try to acquire a being held softirq_expiry_lock when the current timer is running, these steps above are reasonable. However, it also has downside. When the timer is running, the cancelling of the timer is delayed when releasing the last map uref. The delay is also fixable (e.g., break the cancelling of bpf timer into two parts: one part in locked scope, another one in unlocked scope), it can be revised later if necessary. It is a bit hard to decide the right fix tag. One reason is that the problem depends on PREEMPT_RT which is enabled in v6.12. Considering the softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced in v5.15, the bpf_timer commit is used in the fixes tag and an extra depends-on tag is added to state the dependency on PREEMPT_RT. Fixes: b00628b ("bpf: Introduce bpf timers.") Depends-on: v6.12+ with PREEMPT_RT enabled Reported-by: Sebastian Andrzej Siewior <[email protected]> Closes: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Hou Tao <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit 0045e3d80613cc7174dc15f189ee6fc4e73b9365 ] Now that we can have percpu xfrm states, the number of active states might increase. To get a better lookup performance, we cache the used xfrm states at the policy for outbound IPsec traffic. Signed-off-by: Steffen Klassert <[email protected]> Tested-by: Antony Antony <[email protected]> Tested-by: Tobias Brunner <[email protected]> Stable-dep-of: e952837f3ddb ("xfrm: state: fix out-of-bounds read during lookup") Signed-off-by: Sasha Levin <[email protected]> [nwager: Drop hunk #2 due to missing commit: 17163f23678c ("xfrm: minor update to sdb and xfrm_policy comments") and context change in hunk #4 due to missing commit: a54ad727f745 ("xfrm: policy: remove remaining use of inexact list"). I am keeping this change despite the backport effort becuase the Stable-dep-of commit fixes an in-tree patch.] Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit 396f0165672c6a74d7379027d344b83b5f05948c ] Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c72 ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Suggested-by: Lance Richardson <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2103829 [ Upstream commit b32c36975da48afc9089f8b61f7b2dcc40e479d2 ] In "one-shot" mode, turbostat 1. takes a counter snapshot 2. forks and waits for a child 3. takes the end counter snapshot and prints the result. But turbostat counter snapshots currently use affinity to travel around the system so that counter reads are "local", and this affinity must be cleared between #1 and #2 above. The offending commit removed that reset that allowed the child to run on cpu_present_set. Fix that issue, and improve upon the original by using cpu_possible_set for the child. This allows the child to also run on CPUs that hotplug online during its runtime. Reported-by: Zhang Rui <[email protected]> Fixes: 7bb3fe2 ("tools/power/turbostat: Obey allowed CPUs during startup") Signed-off-by: Len Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2104091 commit 3599bae489d86fbabe039f9a2ab5472ffb04f7f1 upstream. The 32-bit Debian kernel 6.12 fails to boot and crashes like this: init (pid 65): Protection id trap (code 7) CPU: 0 UID: 0 PID: 65 Comm: init Not tainted 6.12.9 #2 Hardware name: 9000/778/B160L YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001000000000000001111 Not tainted r00-03 0004000f 110d39d0 109a6558 12974400 r04-07 12a810e0 12a810e0 00000000 12a81144 r08-11 12a81174 00000007 00000000 00000002 r12-15 f8c55c08 0000006c 00000001 f8c55c08 r16-19 00000002 f8c58620 002da3a8 0000004e r20-23 00001a46 0000000f 10754f84 00000000 r24-27 00000000 00000003 12ae6980 1127b9d0 r28-31 00000000 00000000 12974440 109a6558 sr00-03 00000000 00000000 00000000 00000010 sr04-07 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 110d39d0 110d39d4 IIR: baadf00d ISR: 00000000 IOR: 110d39d0 CPU: 0 CR30: 128740c0 CR31: 00000000 ORIG_R28: 000003f3 IAOQ[0]: 0x110d39d0 IAOQ[1]: 0x110d39d4 RP(r2): security_sk_free+0x70/0x1a4 Backtrace: [<10d8c844>] __sk_destruct+0x2bc/0x378 [<10d8e33c>] sk_destruct+0x68/0x8c [<10d8e3dc>] __sk_free+0x7c/0x148 [<10d8e560>] sk_free+0xb8/0xf0 [<10f6420c>] unix_release_sock+0x3ac/0x50c [<10f643b8>] unix_release+0x4c/0x7c [<10d832f8>] __sock_release+0x5c/0xf8 [<10d833b4>] sock_close+0x20/0x44 [<107ba52c>] __fput+0xf8/0x468 [<107baa08>] __fput_sync+0xb4/0xd4 [<107b471c>] sys_close+0x44/0x94 [<10405334>] syscall_exit+0x0/0x10 Bisecting points to this commit which triggers the issue: commit 417c5643cd67a55f424b203b492082035d0236c3 Author: KP Singh <[email protected]> Date: Fri Aug 16 17:43:07 2024 +0200 lsm: replace indirect LSM hook calls with static calls After more analysis it seems that we don't fully implement the static calls and jump tables yet. Additionally the functions which mark kernel memory read-only or read-write-executable needs to be further enhanced to be able to fully support static calls. Enabling CONFIG_SECURITY_YAMA=y was one possibility to trigger the issue, although YAMA isn't the reason for the fault. As a temporary solution disable JUMP_LABEL functionality to avoid the crashes. Signed-off-by: Helge Deller <[email protected]> Cc: Guenter Roeck <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Cc: <[email protected]> # v6.12+ Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2104091 commit b0fce54b8c0d8e5f2b4c243c803c5996e73baee8 upstream. syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/[email protected] Reported-by: Jiacheng Xu <[email protected]> Link: https://lore.kernel.org/ocfs2-devel/[email protected]/T/#u Reported-by: [email protected] Link: https://lore.kernel.org/all/[email protected]/T/ Signed-off-by: Su Yue <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Jun Piao <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2104873 [ Upstream commit e4b6b665df815b4841e71b72f06446884e8aad40 ] When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system. Signed-off-by: Aaro Koskinen <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2104873 [ Upstream commit 6d002348789bc16e9203e9818b7a3688787e3b29 ] Function xen_pin_page calls xen_pte_lock, which in turn grab page table lock (ptlock). When locking, xen_pte_lock expect mm->page_table_lock to be held before grabbing ptlock, but this does not happen when pinning is caused by xen_mm_pin_all. This commit addresses lockdep warning below, which shows up when suspending a Xen VM. [ 3680.658422] Freezing user space processes [ 3680.660156] Freezing user space processes completed (elapsed 0.001 seconds) [ 3680.660182] OOM killer disabled. [ 3680.660192] Freezing remaining freezable tasks [ 3680.661485] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 3680.685254] [ 3680.685265] ================================== [ 3680.685269] WARNING: Nested lock was not taken [ 3680.685274] 6.12.0+ #16 Tainted: G W [ 3680.685279] ---------------------------------- [ 3680.685283] migration/0/19 is trying to lock: [ 3680.685288] ffff88800bac33c0 (ptlock_ptr(ptdesc)#2){+.+.}-{3:3}, at: xen_pin_page+0x175/0x1d0 [ 3680.685303] [ 3680.685303] but this task is not holding: [ 3680.685308] init_mm.page_table_lock [ 3680.685311] [ 3680.685311] stack backtrace: [ 3680.685316] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16 [ 3680.685324] Tainted: [W]=WARN [ 3680.685328] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0 [ 3680.685339] Call Trace: [ 3680.685344] <TASK> [ 3680.685347] dump_stack_lvl+0x77/0xb0 [ 3680.685356] __lock_acquire+0x917/0x2310 [ 3680.685364] lock_acquire+0xce/0x2c0 [ 3680.685369] ? xen_pin_page+0x175/0x1d0 [ 3680.685373] _raw_spin_lock_nest_lock+0x2f/0x70 [ 3680.685381] ? xen_pin_page+0x175/0x1d0 [ 3680.685386] xen_pin_page+0x175/0x1d0 [ 3680.685390] ? __pfx_xen_pin_page+0x10/0x10 [ 3680.685394] __xen_pgd_walk+0x233/0x2c0 [ 3680.685401] ? stop_one_cpu+0x91/0x100 [ 3680.685405] __xen_pgd_pin+0x5d/0x250 [ 3680.685410] xen_mm_pin_all+0x70/0xa0 [ 3680.685415] xen_pv_pre_suspend+0xf/0x280 [ 3680.685420] xen_suspend+0x57/0x1a0 [ 3680.685428] multi_cpu_stop+0x6b/0x120 [ 3680.685432] ? update_cpumasks_hier+0x7c/0xa60 [ 3680.685439] ? __pfx_multi_cpu_stop+0x10/0x10 [ 3680.685443] cpu_stopper_thread+0x8c/0x140 [ 3680.685448] ? smpboot_thread_fn+0x20/0x1f0 [ 3680.685454] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 3680.685458] smpboot_thread_fn+0xed/0x1f0 [ 3680.685462] kthread+0xde/0x110 [ 3680.685467] ? __pfx_kthread+0x10/0x10 [ 3680.685471] ret_from_fork+0x2f/0x50 [ 3680.685478] ? __pfx_kthread+0x10/0x10 [ 3680.685482] ret_from_fork_asm+0x1a/0x30 [ 3680.685489] </TASK> [ 3680.685491] [ 3680.685491] other info that might help us debug this: [ 3680.685497] 1 lock held by migration/0/19: [ 3680.685500] #0: ffffffff8284df38 (pgd_lock){+.+.}-{3:3}, at: xen_mm_pin_all+0x14/0xa0 [ 3680.685512] [ 3680.685512] stack backtrace: [ 3680.685518] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16 [ 3680.685528] Tainted: [W]=WARN [ 3680.685531] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0 [ 3680.685538] Call Trace: [ 3680.685541] <TASK> [ 3680.685544] dump_stack_lvl+0x77/0xb0 [ 3680.685549] __lock_acquire+0x93c/0x2310 [ 3680.685554] lock_acquire+0xce/0x2c0 [ 3680.685558] ? xen_pin_page+0x175/0x1d0 [ 3680.685562] _raw_spin_lock_nest_lock+0x2f/0x70 [ 3680.685568] ? xen_pin_page+0x175/0x1d0 [ 3680.685572] xen_pin_page+0x175/0x1d0 [ 3680.685578] ? __pfx_xen_pin_page+0x10/0x10 [ 3680.685582] __xen_pgd_walk+0x233/0x2c0 [ 3680.685588] ? stop_one_cpu+0x91/0x100 [ 3680.685592] __xen_pgd_pin+0x5d/0x250 [ 3680.685596] xen_mm_pin_all+0x70/0xa0 [ 3680.685600] xen_pv_pre_suspend+0xf/0x280 [ 3680.685607] xen_suspend+0x57/0x1a0 [ 3680.685611] multi_cpu_stop+0x6b/0x120 [ 3680.685615] ? update_cpumasks_hier+0x7c/0xa60 [ 3680.685620] ? __pfx_multi_cpu_stop+0x10/0x10 [ 3680.685625] cpu_stopper_thread+0x8c/0x140 [ 3680.685629] ? smpboot_thread_fn+0x20/0x1f0 [ 3680.685634] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 3680.685638] smpboot_thread_fn+0xed/0x1f0 [ 3680.685642] kthread+0xde/0x110 [ 3680.685645] ? __pfx_kthread+0x10/0x10 [ 3680.685649] ret_from_fork+0x2f/0x50 [ 3680.685654] ? __pfx_kthread+0x10/0x10 [ 3680.685657] ret_from_fork_asm+0x1a/0x30 [ 3680.685662] </TASK> [ 3680.685267] xen:grant_table: Grant tables using version 1 layout [ 3680.685921] OOM killer enabled. [ 3680.685934] Restarting tasks ... done. Signed-off-by: Maksym Planeta <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Message-ID: <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

…ea as VM_ALLOC BugLink: https://bugs.launchpad.net/bugs/2106494 [ Upstream commit d262a192d38e527faa5984629aabda2e0d1c4f54 ] Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f08816b ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately. Reported-by: Erhard Furtner <[email protected]> Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/ Fixes: 37bc3e5 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Mehmet Basaran <[email protected]>

…messages (#2)

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

86b2e81

…messages

pzakha mentioned this pull request Feb 4, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages delphix/linux-kernel-generic#2

Merged

pcd1193182 approved these changes Feb 8, 2021

View reviewed changes

sdimitro approved these changes Feb 9, 2021

View reviewed changes

pzakha merged commit 046098e into delphix:master Feb 9, 2021

jwk404 pushed a commit to jwk404/linux-kernel-gcp that referenced this pull request Apr 1, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

b32f81f

…messages (delphix#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 6, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

ec26bba

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 16, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

f51192c

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request Apr 20, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

f6fb11c

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 12, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

62edc56

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 17, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

95ecb0b

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 18, 2021

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

5da2c2d

…messages (#2)

sebroy pushed a commit that referenced this pull request Apr 24, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

9c2f0ea

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 8, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

0c85650

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 9, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

ce13e62

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 10, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

e2d5ae1

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 11, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

fd08df8

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 12, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

63e0eb5

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 13, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

af10d5a

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 14, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

8d8d457

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 14, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

7f04b77

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 21, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

252cc72

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 22, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

d80e654

…messages (#2)

sebroy pushed a commit that referenced this pull request May 22, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

6cda3ec

…messages (#2)

delphix-devops-bot pushed a commit that referenced this pull request May 23, 2025

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" …

de80e83

…messages (#2)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

Uh oh!

pzakha commented Feb 4, 2021

Uh oh!

Uh oh!

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

DLPX-71852 iSCSI: journal flooded with "Unable to locate Target IQN" messages #2

Uh oh!

Conversation

pzakha commented Feb 4, 2021

Uh oh!

Uh oh!