A small nothing left aside. serialEvent()

[fredericplante]

I, you guys seeem to forgot the serialEvent() trigger, that is required to be fully compatible with the basics example of the Arduino IDE.

I guess we could just program a trigger from within the program, you while you guys are at it, well here is the constructive remark ;)

Thanx :)

Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.

[igrr]

I never new about it, thanks for pointing this out.
However, reading Arduino website,

serialEvent() is not compatible with the Esplora, Leonardo, or Micro

So it's not even supported by some of the Arduino brand boards.
Still, I will look into this once I add the callback queue and some
scheduling functions.

On Sun, Sep 6, 2015, 22:39 Frédéric Plante notifications@github.com wrote:

I, you guys seeem to forgot the serialEvent() trigger, that is required to
be fully compatible with the basics example of the Arduino IDE.

I guess we could just program a trigger from within the program, you while
you guys are at it, well here is the constructive remark ;)

Thanx :)

—
Reply to this email directly or view it on GitHub
#752.

[fredericplante]

Might as well be more discipline then them. ;)

Esplora, Leonardo, or Micro are basically all Léonardo tech, that is made to become computer interface(mouse, keyboard, SPI and I2c interface that that lack on a computer) using usb. While all the other arduinos of the first génération, the one using an external UART2USB (MEGA and Tiny) are made to be small stand alone computing device, that can totally function without serial port, except for programming, well that is what i deduce of what I get out of the product.

According to me, the emphasis of the SerialEvent() should of been put on the Léonardo class, and less on the stand alone class, but they did not think about it that way. Any ways, according to me both should have it, there is never enough possible internal trigger and external interrupt.

Take care.

[drmpf]

Is there any notable library that uses SerialEvent()?
Unless there is a particular need for SerialEvent(), I would vote against it.

I see no advantage over calling a method directly from the loop
Calling a method directly from the loop keeps user focused on what happens when and how long it takes.

Most users, particularly casual users, will never use interrupts (apart form library code) and the SerialEvent() runs like an interrupt with some of the associated problems.

I note even on the boards the support SerialEvent() it is not uniform, Mega does not have it, instead having SerialEvent1(), etc.

[fredericplante]

Actually, the sérialevent() event is absolutly independant from the Loop() it's never call from there. T'it's actually the library that manage to trigger event by calling SerialEvent(), in the sketch, from the library. pretty much the same way the when you hook a interupt to a function. Actually, i think that it's the Uart on the Arduino that interupt and get the serialevents call.

A couple of the sketch exemple use it, and there are a few library also.

Actually mini, uno, mega128 and mega256, and all the clone, has it. It is the atmega32u that does handle the event. Has for Due and Zero, im not sure.

I think it's important to put it in, to make sure that the new guy that try esp and Adruino ide together get the same look and feel as if it was a real Arduino. Just saying. I look at your work, and I see that you are trying to make it as transparent as possible, well there is a spot there. ;)

[philomatic]

Anything new on this? I'd be glad to see this coming!

Most users, particularly casual users, will never use interrupts (apart form library code) and the SerialEvent() runs like an interrupt with some of the associated problems.

I disagree. In my experience, almost everyone who programmed an Arduino, AtMega or MSP will use interrupts if available. And these are the users which will use Arduino on ESP8266.
All others will stick to Lua (or similiar HL languages).

Best regards

[tablatronix]

👍

[ArGaspar]

Hi, is SerialEvent() Available now?. im trying to send information via serial from arduino to esp and back the other way, ESP is acting as a web server so if use serial.read is going to block all the others function. Any suggestions?

Best Regards.

[fredericplante]

I knew this was going to come up. It's not because it seam useless for some that it is for every one. I will take a look at the progress [...]

[...] Well I check at the https://github.com/esp8266/Arduino/blob/master/cores/esp8266/HardwareSerial.h

at line 146 and line 147 the procedure seam to be put in place.
but not the

extern void serialEventRun(void) __attribute__((weak));

part that will call the Serial event from the library in the sketch when the stuff is available, is still missing

This part:

void serialEventRun(void){

#if defined(HAVE_HWSERIAL0)
  if (Serial0_available && serialEvent && Serial0_available()) serialEvent();
#endif

#if defined(HAVE_HWSERIAL1)
  if (Serial1_available && serialEvent1 && Serial1_available()) serialEvent1();
#endif

}

Should be added in the: https://github.com/esp8266/Arduino/blob/master/cores/esp8266/HardwareSerial.cpp

I've put the lines for Serial1, but I don't think that it would be really useful, since there is not Rx line on that port. Basically, only Serial0 need to pull an interruption when selected events happen.

[ArGaspar]

Is it possible to modify that myself? I cant find that file/folder on my pc. (sorry if its a stupid question, Im a noob, barely I understand how library works)

Best Regards.

[fredericplante]

Yeah! probably, if you know where your arduino platform distribution is, you can change it no problem. But every time you will reinstall, you will loose all, same when they will update.

Best would be to change at the root, but for some reason, some people think that if it's useless for them, it has to be the same for every one. :(

[ArGaspar]

Hey, I know where it its, but i cant find the file it should be on libraries right???? did you make it work?

[philomatic]

I'm also out of luck, can't find the location of the files on my disk.
Any ideas?

Edit: Nvm,, using the git version now.

Best Regards
Patrick