arduino-lighten

This repo contains the Arduino code for the hardware side of lighten.

Setup

Arduino

The following Arduino libraries are required:

• Adafruit TSL2591 library
• Adafruit Unified Sensor
• Adafruit TinyUSB (The board used should have built-in support for this library)

This tutorial explains how to set up the first two.

The TinyUSB library can be installed similarly:

In the Arduino IDE menus, go to Sketch -> Include Library -> Manage Libraries, then search for and install Adafruit TinyUSB.

Now clone the arduino-lighten repo:

git clone https://github.com/jcrd/arduino-lighten.git

Open the arduino-lighten.ino file in the Arduino IDE and upload it to the board.

udev

Appropriate udev rules must be configured to access the HID device.

Create a .rules file in /etc/udev/rules.d that looks like:

SUBSYSTEM=="usb", ATTR{idVendor}=="239a", ATTR{idProduct}=="8111", MODE="0660", GROUP="plugdev", TAG+="uaccess", TAG+="udev-acl"
KERNEL=="hidraw*", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="8111", MODE="0660", GROUP="plugdev", TAG+="uaccess", TAG+="udev-acl"

where the idVendor and idProduct attributes reflect the values found using lsusb:

Bus 005 Device 002: ID 239a:8111 Adafruit QT Py ESP32-S2

The sixth column contains the IDs in the format: vendor:product.

See this section of the hidapi Python library documentation for more information.

License

This project is licensed under the MIT License (see LICENSE).