Vault Workshop

Running Vault

• To start vault and the other used docker containers run (make up) in the directory containing the docker-compose.yaml file

  docker-compose up
  

  this starts up 3 containers (client, vault, and postgres). Can see this with 'docker ps'

  CONTAINER ID        NAMES                        IMAGE                      STATUS
  3bad8be2d9d6        vault-in-practice_vault_1    vault:1.1.0-beta2          Up 14 hours
  4cd80e52d798        vault-in-practice_db_1       postgres:10.4              Up 14 hours
  bf1a84a0cf0d        vault-in-practice_client_1   kasterma/vip:0.0.0         Up 14 hours
  

• We will run all our commands from the client container that has been started. In a new terminal type (make exec)

   docker exec -ti vault-in-practice_client_1 bash
  

  this will give you a bash shell in the client container where we will execute all the commands. Think of this shell as the local shell on your laptop (but with everything you need installed).

• vault status will now show that this vault is not initialized and is still sealed.

• vault operator init

  Unseal Key 1: C85vMOVjVGrfCRMttk2Kfgg93upYCVb4SmBRf+sPYhv0
  Unseal Key 2: Hp/LbMLwGN4jwOjcDr/uHCicVtv4e+yalo1KdnbTNmyQ
  Unseal Key 3: oX3I/Jkgxny+8HUwT2kfA0T3Yv8TPt9vTtPJjhUfK+ri
  Unseal Key 4: B6fzcpvdEC+JBziv8xyK89JkTKlY6riwQ+0fsBpuejEo
  Unseal Key 5: NZV2tz31AfmQdq2LzPotLSUrpTFD70es9Tc/fY/XJ0ol
  
  Initial Root Token: s.LtwAGw2b9wvvP4iKZHEa1Fwn
  

  Make sure you keep this info handy. If you lose it you will need to start over.

• 'vault operator unseal' repeatedly with the info above. After having done this three times you will see that the vaul is both initialized and unsealed.

• Check everything is working; in the client bash run

   vault status
  

  and you should see an output of the form

    Key             Value
    ---             -----
    Seal Type       shamir
    Initialized     true
    Sealed          false
    Total Shares    1
    Threshold       1
    Version         1.1.0-beta2
    Cluster Name    vault-cluster-47145d50
    Cluster ID      2864e1a8-7623-34d0-b9b6-ddde52e138b6
    HA Enabled      false
  

Important note

The data is stored on docker volumes. So you can stop all containers (docker-compose down) and as long as you don't delete the volumes the data will be maintained. Then when you start it back up, you need your unseal keys to be able to use it. 'make clean' will remove all data.

Basic Vault operations

• Get a shell in the client container (make exec)

  docker exec -ti vault-in-practice_client_1 bash
  

• vault status

• vault login use the root token from the log, now the token gets stored in '/root/.vault-token' (the user in the container is root :-/ )

key value store

• vault secrets enable -version=2 -path=secret kv enable the kv secrets engine secret; note this is the engine that is enabled by default in when running in --dev mode. It is a versioned key-value store that takes care of encryption before storing in non-volatile storage, and access management through policies (later).

• vault kv put secret/workshop foo=bar

• vault kv get secret/workshop

• vault kv put secret/workshop foo=barbar store new version of secret

• vault kv get secret/workshop

• vault kv get --version=1 secret/workshop get an older version

• curl --header "X-Vault-Token: $(cat /root/.vault-token)" ${VAULT_ADDR}/v1/secret/data/workshop to request the secret using the API (really the above vault cli commands are translated to such requests); see https://www.vaultproject.io/api/secret/kv/kv-v2.html for the full description of the key-value store API.

• curl --header "X-Vault-Token: $(cat /root/.vault-token)" ${VAULT_ADDR}/v1/secret/data/workshop?version=1

• open browser to localhost:8200/ui. Use your token to login, go to the secret and update to a new version. This is again doing the same thing as the curl command, but in a more point and click way.

• vault kv put secret/hello foo=bar create four versions of a secret.

• vault kv put secret/hello foo=barr

• vault kv put secret/hello foo=barrr

• vault kv put secret/hello foo=barrrr

• vault kv destroy -versions=2 secret/hello this destroys the second version of the secret

Authentication and Policies

• vault auth list

• vault policy write test policy1.hcl add a new policy that gives full access to only secrets that start with workshop.

• vault auth enable userpass this is using the API at https://www.vaultproject.io/api/auth/userpass/index.html, we are showing this here, but all interaction with Vault is through API described like this

• vault write auth/userpass/users/workshop password="workshop" policies="test"

• vault login -method=userpass username=workshop password=workshop login as the newly created user

• vault auth list see we now have more methods enabled

• vault kv get secret/hello permission denied

• vault kv get secret/workshop

• vault kv put secret/workshop foo=bar

• vault token lookup

Transit Secrets Engine

https://learn.hashicorp.com/vault/encryption-as-a-service/eaas-transit

Note: this requires the vaul to be provisioned by going to /provision-vault/ in the cli container and running ./provision.sh.

You can check that the provisioning is correct by checking for the existence of the transitpol by running vault policy read transitpol.

• vault secrets enable transit enable the transit secrets engine.

• vault write -f transit/keys/orders create an encryption key ring named orders.

• plain="4111 1111 1111 1111"

• plaintext=$(base64 <<< ${plain}) we first base64 encode the text, since then the plaintext is safe to be send as part of http request or reply.

• vault write transit/encrypt/orders plaintext=$plaintext encrypt it. Note that Vault is not storing the data, it only stores the keys and arranges access to the keys through policies, the user manages the data.

• cipher=$(vault write transit/encrypt/orders plaintext=$plaintext -format=json) encrypt it again, but now get json output and store in variable cipher.

• equivalently

  curl --header "X-Vault-Token: $VAULT_TOKEN" \
       --request POST \
       --data '{"plaintext": "NDExMSAxMTExIDExMTEgMTExMQo="}' \
       http://vault:8200/v1/transit/encrypt/orders
  

  which shows how easy it is to use from an application (note that you can always get the curl equivalent by running vault write -output-curl-string transit/encrypt/orders plaintext=$plaintext; note -output-curl-string should work for most if not all vault commands).

• ciphertext=$(echo $cipher | jq -r .data.ciphertext)

• vault write transit/decrypt/orders ciphertext=$ciphertext decrypt the ciphertext you just created.

• equivalently

  curl --header "X-Vault-Token: $VAULT_TOKEN" \
       --request POST \
       --data '{"ciphertext": "$ciphertext"}' \
   http://vault:8200/v1/transit/decrypt/orders
  

Dynamic postgres secret

https://www.vaultproject.io/docs/secrets/databases/postgresql.html

• vault secrets enable database

• create the dynamic secret

    vault write database/config/vaultpg \
        plugin_name=postgresql-database-plugin \
        allowed_roles="create" \
        connection_url="postgresql://{{username}}:{{password}}@db:5432/vaultpg?sslmode=disable" \
        username="vaultpg" \
        password="monkey123"
  
    vault write database/roles/create \
        db_name=vaultpg \
        creation_statements="CREATE ROLE \"{{name}}\" WITH LOGIN PASSWORD '{{password}}' VALID UNTIL '{{expiration}}'; \
            GRANT SELECT ON ALL TABLES IN SCHEMA public TO \"{{name}}\";" \
        default_ttl="1h" \
        max_ttl="24h"
  

• vault read database/creds/create to get freshly created credentials

• psql -h db -U [username from above] -d vaultpg

Using VaultManager

Note this requires

1. the step of enabling the kv store above to have been done before (vault secrets enable -version=2 -path=secret kv).

2. the vault being provisioned (./provision.sh in directory /provision-vault/).

Now go to localhost:8200 log in with the token. In the cli container go to directory /vaultmanager/. In that directory first update the VAULT_TOKEN in the Makefile, and then run

make getsecret

you then see the value of the secret. In the ui, go to update the secret. If you do it quick enough you will see the last line have the updated secret. Inspect vaultmanager/example.py function get_secret to see how the VaultManager is used.

Then do

make connection

there you see some data extracted from the database (compare with postgres/data/testtable.csv). Now inspect vaultmanager/exmaple.py function get_connection to see how the VaultManager is used. Note that the connection is a derived secret that is automatically updated by the VaultManager when the credentials as stored in vault are updated.

Notes

docker compose

In the docker compose file we set up three containers (1) client, the container in which we will be executing our commands (think of this as being a local shell on your laptop where all needed tools are already installed), (2) vault, this is the running vault service storing its data in a volume and exposing a port on your computer locally in case you want to interact with it using an installed vault binary or use the vault ui (localhost:8200) for updating secrets, and (3) a postgres container for the demo with dynamic secrets (and also used as an example for automatically updated derived "secret" in the vault manager).

The postgres container has its configuration in two places, (1) in the docker compose file, (2) in the directory postgres/ which gets mounted into that container. In this directory there is some test data so that we already have a filled database to play with.

Provisioning in the VaultManager step

In the cli-docker (directory cli-docker/files/provision-vault in this repo) you see a use of the pattern suggested at https://www.hashicorp.com/blog/codifying-vault-policies-and-configuration, but with also some secrets added (which clearly should not be managed in this way). It consists of a directory structure that mirrors the api structure of vault, and a shell script (provision.sh) that sends the data in the appropriate order to vault to configure it.