Update regcache-maple.c #1

namiltd · 2024-07-25T21:45:22Z

Initialize variables

…mode in i.MX 8QM Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement that both source and destination addresses need pass through the IOMMU. Typically, peripheral FIFO addresses bypass the IOMMU, necessitating only one of the source or destination to go through it. Set "is_remote" to true to ensure both source and destination addresses pass through the IOMMU. iMX8 Spec define "Local" and "Remote" bus as below. Local bus: bypass IOMMU to directly access other peripheral register, such as FIFO. Remote bus: go through IOMMU to access system memory. The test fail log as follow: [ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0) [ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0) Fixes: 72f5801 ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Joy Zou <[email protected]> Cc: [email protected] Reviewed-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

Fix warning at drivers/pci/msi/msi.h:121. Recently, I added a PCI to PCIe bridge adaptor and a PCIe NVME card to my rp3440. Then, I noticed this warning at boot: WARNING: CPU: 0 PID: 10 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x68/0x90 CPU: 0 PID: 10 Comm: kworker/u32:0 Not tainted 6.9.7-parisc64 #1 Debian 6.9.7-1 Hardware name: 9000/800/rp3440 Workqueue: async async_run_entry_fn We need to select PCI_MSI_ARCH_FALLBACKS when PCI_MSI is selected. Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] # v6.0+ Signed-off-by: Helge Deller <[email protected]>

The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr Cc: [email protected] Fixes: 67fa83f ("net/tcp: Add static_key for TCP-AO") Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ torvalds#23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8a ("net: libwx: Support to receive packets in NAPI") Cc: [email protected] Signed-off-by: Jiawen Wu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ torvalds#23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8a ("net: libwx: Support to receive packets in NAPI") Cc: [email protected] Signed-off-by: Jiawen Wu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ torvalds#23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8a ("net: libwx: Support to receive packets in NAPI") Cc: [email protected] Signed-off-by: Jiawen Wu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The mailbox framework has a single inflight request at a time. If a request is sent while another is still active, it will be queued to the mailbox core ring buffer. ACPM protocol did not serialize the calls to the mailbox subsystem so we could start the timeout ticks in parallel for multiple requests, while just one was being inflight. Consider a hypothetical case where the xfer timeout is 100ms and an ACPM transaction takes 90ms: | 0ms: Message #0 is queued in mailbox layer and sent out, then sits | at acpm_dequeue_by_polling() with a timeout of 100ms | 1ms: Message #1 is queued in mailbox layer but not sent out yet. | Since send_message() doesn't block, it also sits at | acpm_dequeue_by_polling() with a timeout of 100ms | ... | 90ms: Message #0 is completed, txdone is called and message #1 is sent | 101ms: Message #1 times out since the count started at 1ms. Even though | it has only been inflight for 11ms. Fix the problem by moving mbox_send_message() and mbox_client_txdone() immediately after the message has been written to the TX queue and while still keeping the ACPM TX queue lock. We thus tie together the TX write with the doorbell ring and mark the TX as done after the doorbell has been rung. This guarantees that the doorbell has been rang before starting the timeout ticks. We should also see some performance improvement as we no longer wait to receive a response before ringing the doorbell for the next request, so the ACPM firmware shall be able to drain faster the TX queue. Another benefit is that requests are no longer able to ring the doorbell one for the other, so it eases debugging. Finally, the mailbox software queue will always contain a single doorbell request due to the serialization done at the ACPM TX queue level. Protocols like ACPM, that handle their own hardware queues need a passthrough mailbox API, where they are able to just ring the doorbell or flip a bit directly into the mailbox controller. The mailbox software queue mechanism, the locking done into the mailbox core is not really needed, so hopefully this lays the foundation for a passthrough mailbox API. Reported-by: André Draszik <[email protected]> Fixes: a88927b ("firmware: add Exynos ACPM protocol driver") Signed-off-by: Tudor Ambarus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>

…-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered away thanks to L1TF, but panicking in this scenario is preferable to potentially running with corrupted state. Reported-by: Alexander Potapenko <[email protected]> Tested-by: Alexander Potapenko <[email protected]> Fixes: 0b020f5 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b566393 ("KVM: SEV: Add support for SEV intra host migration") Cc: [email protected] Cc: James Houghton <[email protected]> Cc: Peter Gonda <[email protected]> Reviewed-by: Liam Merwick <[email protected]> Tested-by: Liam Merwick <[email protected]> Reviewed-by: James Houghton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>

When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+), the host can experience CPU soft lockups when running an operation in kvm_vm_set_mem_attributes() to set memory attributes on the whole range of guest memory. watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372] CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary) Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024 RIP: 0010:xas_create+0x78/0x1f0 Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87 RSP: 0018:ffffad890a34b940 EFLAGS: 00000286 RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000 RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868 R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868 FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> xas_store+0x58/0x630 __xa_store+0xa5/0x130 xa_store+0x2c/0x50 kvm_vm_set_mem_attributes+0x343/0x710 [kvm] kvm_vm_ioctl+0x796/0xab0 [kvm] __x64_sys_ioctl+0xa3/0xd0 do_syscall_64+0x8c/0x7a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f5578d031bb Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000 R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120 R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0 While looping through the range of memory setting the attributes, call cond_resched() to give the scheduler a chance to run a higher priority task on the runqueue if necessary and avoid staying in kernel mode long enough to trigger the lockup. Fixes: 5a47555 ("KVM: Introduce per-page memory attributes") Cc: [email protected] # 6.12.x Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Liam Merwick <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]>

Add 0x29 as the accelerometer address for the Dell Latitude 5500 to lis3lv02d_devices[]. The address was verified as below: $ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.4 $ ls -d i2c-? i2c-2 $ sudo modprobe i2c-dev $ sudo i2cdetect 2 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-2. I will probe address range 0x08-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- 30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device lis3lv02d 0x29 $ sudo dmesg [ 0.000000] Linux version 6.12.32-amd64 ([email protected]) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.32-1 (2025-06-07) […] [ 0.000000] DMI: Dell Inc. Latitude 5500/0M14W7, BIOS 1.38.0 03/06/2025 […] [ 609.063488] i2c_dev: i2c /dev entries driver [ 639.135020] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29 Signed-off-by: Paul Menzel <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>

When I run the NVME over TCP test in virtme-ng, I get the following "suspicious RCU usage" warning in nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN "nqn.2025-06.org.nvmexpress.mptcp", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ torvalds#23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ torvalds#23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] <TASK> [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044559][ T25] ret_from_fork+0x218/0x2e0 [ 5.044561][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044562][ T25] ret_from_fork_asm+0x1a/0x30 [ 5.044570][ T25] </TASK> ''' This patch uses sleepable RCU version of helper list_for_each_entry_srcu() instead of list_for_each_entry_rcu() to fix it. Fixes: 4dbd2b2 ("nvme-multipath: Add visibility for round-robin io-policy") Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Nilay Shroff <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>

Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the GPU, it's necessary to disable all interrupts and deal with any interrupt handler still in-flight. Otherwise, the GPU might reset with jobs still running, or yet, an interrupt could be handled during the reset. Cc: [email protected] Fixes: 57692c9 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Juan A. Suarez <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maíra Canal <[email protected]>

syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [1]: Unable to handle kernel write to read-only memory at virtual address ffff8000891ac9a8 KASAN: probably user-memory-access in range [0x0000000448d64d40-0x0000000448d64d47] Mem abort info: ESR = 0x000000009600004e EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0e: level 2 permission fault Data abort info: ISV = 0, ISS = 0x0000004e, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000207144000 [ffff8000891ac9a8] pgd=0000000000000000, p4d=100000020f950003, pud=100000020f951003, pmd=0040000201000781 Internal error: Oops: 000000009600004e [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 6946 Comm: syz.0.69 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1971 lr : add_ptr_to_bulk_krc_lock mm/slab_common.c:1838 [inline] lr : kvfree_call_rcu+0xfc/0x3f0 mm/slab_common.c:1963 sp : ffff8000a28a7730 x29: ffff8000a28a7730 x28: 00000000fffffff5 x27: 1fffe00018b09bb3 x26: 0000000000000001 x25: ffff80008f66e000 x24: ffff00019beaf498 x23: ffff00019beaf4c0 x22: 0000000000000000 x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: 0000000000000000 x18: 00000000ffffffff x17: ffff800093363000 x16: ffff80008052c6e4 x15: ffff700014514ecc x14: 1ffff00014514ecc x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700014514ecc x10: 0000000000000001 x9 : 0000000000000001 x8 : ffff00019beaf7b4 x7 : ffff800080a94154 x6 : 0000000000000000 x5 : ffff8000935efa60 x4 : 0000000000000008 x3 : ffff80008052c7fc x2 : 0000000000000001 x1 : ffff8000891ac9a0 x0 : 0000000000000001 Call trace: kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1967 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: aa1f03e2 52800023 97ee1e8d b4000195 (f90006b4) Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=271fed3ed6f24600c364 # [2] Link: https://lore.kernel.org/netdev/[email protected]/ # [3] Link: https://lore.kernel.org/netdev/[email protected]/ # [4] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the VF namespace switching code from the NETDEV_REGISTER event handler to netvsc_open(). Cc: [email protected] Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Reported-by: Cathy Avery <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [1]: Unable to handle kernel write to read-only memory at virtual address ffff8000891ac9a8 KASAN: probably user-memory-access in range [0x0000000448d64d40-0x0000000448d64d47] Mem abort info: ESR = 0x000000009600004e EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0e: level 2 permission fault Data abort info: ISV = 0, ISS = 0x0000004e, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000207144000 [ffff8000891ac9a8] pgd=0000000000000000, p4d=100000020f950003, pud=100000020f951003, pmd=0040000201000781 Internal error: Oops: 000000009600004e [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 6946 Comm: syz.0.69 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1971 lr : add_ptr_to_bulk_krc_lock mm/slab_common.c:1838 [inline] lr : kvfree_call_rcu+0xfc/0x3f0 mm/slab_common.c:1963 sp : ffff8000a28a7730 x29: ffff8000a28a7730 x28: 00000000fffffff5 x27: 1fffe00018b09bb3 x26: 0000000000000001 x25: ffff80008f66e000 x24: ffff00019beaf498 x23: ffff00019beaf4c0 x22: 0000000000000000 x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: 0000000000000000 x18: 00000000ffffffff x17: ffff800093363000 x16: ffff80008052c6e4 x15: ffff700014514ecc x14: 1ffff00014514ecc x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700014514ecc x10: 0000000000000001 x9 : 0000000000000001 x8 : ffff00019beaf7b4 x7 : ffff800080a94154 x6 : 0000000000000000 x5 : ffff8000935efa60 x4 : 0000000000000008 x3 : ffff80008052c7fc x2 : 0000000000000001 x1 : ffff8000891ac9a0 x0 : 0000000000000001 Call trace: kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1967 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: aa1f03e2 52800023 97ee1e8d b4000195 (f90006b4) Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=271fed3ed6f24600c364 # [2] Link: https://lore.kernel.org/netdev/[email protected]/ # [3] Link: https://lore.kernel.org/netdev/[email protected]/ # [4] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the VF namespace switching code from the NETDEV_REGISTER event handler to netvsc_open(). Cc: [email protected] Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Reported-by: Cathy Avery <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [1]: Unable to handle kernel write to read-only memory at virtual address ffff8000891ac9a8 KASAN: probably user-memory-access in range [0x0000000448d64d40-0x0000000448d64d47] Mem abort info: ESR = 0x000000009600004e EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0e: level 2 permission fault Data abort info: ISV = 0, ISS = 0x0000004e, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000207144000 [ffff8000891ac9a8] pgd=0000000000000000, p4d=100000020f950003, pud=100000020f951003, pmd=0040000201000781 Internal error: Oops: 000000009600004e [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 6946 Comm: syz.0.69 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1971 lr : add_ptr_to_bulk_krc_lock mm/slab_common.c:1838 [inline] lr : kvfree_call_rcu+0xfc/0x3f0 mm/slab_common.c:1963 sp : ffff8000a28a7730 x29: ffff8000a28a7730 x28: 00000000fffffff5 x27: 1fffe00018b09bb3 x26: 0000000000000001 x25: ffff80008f66e000 x24: ffff00019beaf498 x23: ffff00019beaf4c0 x22: 0000000000000000 x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: 0000000000000000 x18: 00000000ffffffff x17: ffff800093363000 x16: ffff80008052c6e4 x15: ffff700014514ecc x14: 1ffff00014514ecc x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700014514ecc x10: 0000000000000001 x9 : 0000000000000001 x8 : ffff00019beaf7b4 x7 : ffff800080a94154 x6 : 0000000000000000 x5 : ffff8000935efa60 x4 : 0000000000000008 x3 : ffff80008052c7fc x2 : 0000000000000001 x1 : ffff8000891ac9a0 x0 : 0000000000000001 Call trace: kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1967 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: aa1f03e2 52800023 97ee1e8d b4000195 (f90006b4) Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=271fed3ed6f24600c364 # [2] Link: https://lore.kernel.org/netdev/[email protected]/ # [3] Link: https://lore.kernel.org/netdev/[email protected]/ # [4] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the VF namespace switching code from the NETDEV_REGISTER event handler to netvsc_open(). Cc: [email protected] Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Reported-by: Cathy Avery <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: NipaLocal <nipa@local>

syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [1]: Unable to handle kernel write to read-only memory at virtual address ffff8000891ac9a8 KASAN: probably user-memory-access in range [0x0000000448d64d40-0x0000000448d64d47] Mem abort info: ESR = 0x000000009600004e EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0e: level 2 permission fault Data abort info: ISV = 0, ISS = 0x0000004e, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000207144000 [ffff8000891ac9a8] pgd=0000000000000000, p4d=100000020f950003, pud=100000020f951003, pmd=0040000201000781 Internal error: Oops: 000000009600004e [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 6946 Comm: syz.0.69 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1971 lr : add_ptr_to_bulk_krc_lock mm/slab_common.c:1838 [inline] lr : kvfree_call_rcu+0xfc/0x3f0 mm/slab_common.c:1963 sp : ffff8000a28a7730 x29: ffff8000a28a7730 x28: 00000000fffffff5 x27: 1fffe00018b09bb3 x26: 0000000000000001 x25: ffff80008f66e000 x24: ffff00019beaf498 x23: ffff00019beaf4c0 x22: 0000000000000000 x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: 0000000000000000 x18: 00000000ffffffff x17: ffff800093363000 x16: ffff80008052c6e4 x15: ffff700014514ecc x14: 1ffff00014514ecc x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700014514ecc x10: 0000000000000001 x9 : 0000000000000001 x8 : ffff00019beaf7b4 x7 : ffff800080a94154 x6 : 0000000000000000 x5 : ffff8000935efa60 x4 : 0000000000000008 x3 : ffff80008052c7fc x2 : 0000000000000001 x1 : ffff8000891ac9a0 x0 : 0000000000000001 Call trace: kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1967 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: aa1f03e2 52800023 97ee1e8d b4000195 (f90006b4) Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=271fed3ed6f24600c364 # [2] Link: https://lore.kernel.org/netdev/[email protected]/ # [3] Link: https://lore.kernel.org/netdev/[email protected]/ # [4] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: NipaLocal <nipa@local>

Update regcache-maple.c

c694118

Initialize variables

namiltd closed this Jul 25, 2024

namiltd deleted the patch-1 branch July 25, 2024 21:46

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Update regcache-maple.c #1

Update regcache-maple.c #1

Uh oh!

namiltd commented Jul 25, 2024

Uh oh!

Uh oh!

Update regcache-maple.c #1

Update regcache-maple.c #1

Uh oh!

Conversation

namiltd commented Jul 25, 2024

Uh oh!

Uh oh!