'fs' can not read data if same FD is used for write and readFile

[thisconnect]

• Version: v6.11.0
• Platform: Darwin computer.local 16.6.0 Darwin Kernel Version 16.6.0: Fri Apr 14 16:21:16 PDT 2017; root:xnu-3789.60.24~6/RELEASE_X86_64 x86_64
• Subsystem: fs

Description:

#3163 added file descriptor support to *File() functions (for example fs.readFile).

Issue: Writing then reading on the same FD does not read the data when using fs.readFile(fd). Only reading (witout writing) works as expected.

The demo opens a file descriptor, writes data to it and tries to read the data using the same FD and fs.readFile. The demo code uses sync methods for simplicity, non-sync version has the same behavior.

const fs = require('fs');
const path = require('path');

const filepath = path.resolve(__dirname, './test-write-and-read.txt');

// 'w+' - Open file for reading and writing.
// The file is created (if it does not exist)
// or truncated (if it exists).
const fd = fs.openSync(filepath, 'w+');

// 'r+' - Open file for reading and writing.
// An exception occurs if the file does not exist.
// const fd = fs.openSync(filepath, 'r+');

// fs.writeFileSync(fd, 'foo bar'); // no issue
fs.writeSync(fd, 'FOOBAR'); // ISSUE: readFileSync(fd) will not read content

// fs.fsyncSync(fd); // <- seems to have no impact

// always reads content (no issue)
const buf = Buffer.alloc(20);
fs.readSync(fd, buf, 0, 20, 0);
console.log('read with fd:', buf.toString())

// always reads content (no issue)
console.log('readFileSync with filepath:', fs.readFileSync(filepath, { encoding: 'utf8' }));

// ISSUE: does not read content if previously writeSync(fd, 'foo bar')
console.log('readFileSync with fd:', fs.readFileSync(fd, { encoding: 'utf8' }));

fs.closeSync(fd);

Expected output:

read with fd: FOOBAR
readFileSync with filepath: FOOBAR
readFileSync with fd: FOOBAR

Actual output:

read with fd: FOOBAR
readFileSync with filepath: FOOBAR
readFileSync with fd:

(last line is missing the file content FOOBAR)

Note:

• fs.fsync seems to have no impact. Assuming this could help and flush the data to the filesystem
• readFileSync with fd does successfully read data if previously no data has been written to the FD before and the test file contains content.

[vsemozhetbyt]

Can reproduce with Node.js 8.1.0 on Windows 7 x64.

This is something like #7099, but not valid for readFile* cases: these methods should not read from the current fd position.

cc @nodejs/fs

[vsemozhetbyt]

@thisconnect Flushing the data to the filesystem seems unneeded, the file size is correctly changed before reading, if I get this right:

const fs = require('fs');
const path = require('path');

const filepath = path.resolve(__dirname, './test-write-and-read.txt');
const fd = fs.openSync(filepath, 'w+');

console.log(fs.statSync(filepath).size);
fs.writeSync(fd, 'FOOBAR');
console.log(fs.statSync(filepath).size);
console.log(fs.readFileSync(fd, { encoding: 'utf8' }));

0
6
  // empty string

[vsemozhetbyt]

1. The cause for readFileSync() seems to be this: in this call chain the reading position is undefined:

node/lib/fs.js

Line 576 in 47b9772

bytesRead = tryReadSync(fd, isUserFd, buffer, pos, size - pos);

node/lib/fs.js

Line 542 in 47b9772

bytesRead = fs.readSync(fd, buffer, pos, len);

node/lib/fs.js

Line 680 in 47b9772

return binding.read(fd, buffer, offset, length, position);

Which may fall into this note from the doc:

If position is null, data will be read from the current file position.

Does the binding function equal undefined and null here?

2. For the fs.readFile() the same happens in this call chain:

node/lib/fs.js

Line 348 in 47b9772

req.oncomplete = readFileAfterOpen;

node/lib/fs.js

Line 426 in 47b9772

req.oncomplete = readFileAfterStat;

node/lib/fs.js

Line 458 in 47b9772

context.read();

node/lib/fs.js

Line 396 in 47b9772

binding.read(this.fd, buffer, offset, length, -1, req);

Does the binding function equal -1 and null here?

It seems we should transfer 0 as a position in these both cases.

[seishun]

This happens because when called with an fd, readFile[Sync] reads from the current file position. I tried to document this behavior in #10853, but it got stalled and then closed.

[vsemozhetbyt]

It seems this better be fixed than documented. readFile[Sync] are supposed to return the full file content according to method names, and the current behavior seems confusing.

[seishun]

@vsemozhetbyt Please read the discussion in that PR. TL;DR some fd are unseekable, so the behavior would be inconsistent between seekable and unseekable fds.

[vsemozhetbyt]

Seems to be a duplicate of the #9671

[MylesBorins]

@thisconnect are you seeing the same failure in 6.10.x?

edit: this appears to fail on 6.10.x and 6.9.x... so it is the same older bug not a new regression

[thisconnect]

@MylesBorins yes same on 6.10.x

[thisconnect]

@thisconnect Flushing the data to the filesystem seems unneeded, the file size is correctly changed before reading, if I get this right

@vsemozhetbyt flushing was just an attempt to rule out this being a possible problem. I too get correct sizes with stats.

[thisconnect]

After reading why to not use fs.exists (see RECOMMENDED section of fs.exists in https://nodejs.org/api/fs.html#fs_fs_exists_path_callback) wrote my own small(ish) module, that nobody uses :) . See fildes (https://github.com/thisconnect/fildes), it promises some fs methods, and takes care about creating missing dir structure if flag is 'w', 'w+', 'a' or 'a+'. I was exited that readFile and writeFile support FD, that landed in Node 5.x and started using it with Node 6.x LTS.

I wasn't aware about the fact that fd have something like a position or could open non-seekable files (sockets?). After reading through the issues libuv/libuv#1357 , #7099, #9671, #9699, #10809, #10853

As a naive Node.js user, this is what I suspect:

• fs.readFile should read the whole file, else seems like a bug
• fs.readFileSync(path) should equal fs.readFileSync(fs.openSync(path))
• FD's having something like a "current file position" is not a feature nor documented (afaik)
• if FD would have postion support, there would be other API needed to work with it
• fs.read should be used if one does not want the whole file
• fs.read and fs.write chaning the position is unexpected
• fs.readFile non-seekable should either read everything it can or throw an error

[sam-github]

I pretty much agree with the expectations, FYI, here is some more info:

• fs.readFile should read the whole file, else seems like a bug
  • agreed
• fs.readFileSync(path) should equal fs.readFileSync(fs.openSync(path))
  • that simple use does, but if you fd=openSync() and readFile twice from the same fd, the second read will get no data :-(
• FD's having something like a "current file position" is not a feature nor documented (afaik)
  • Its fundamental to POSIX fd handling, and as such, not documented in the node fs docs, but it is indeed a feature. fds come in two flavours, seekable and not-seekable. files are seekable, because random access is possible, sockets and pipes are not seekable, you can only read the next data in the stream.
• if FD would have postion support, there would be other API needed to work with it
  • there should probably be a fs.seek() API, I honestly thought there was but just realized its not there. I suspect it can't be implemented on Windows. However you can do positional reads, specifying the offset, so in a way there is an api to work with position. it works slightly differently on Windows and POSIX though: win: restore file position after positional read/write operation libuv/libuv#1357
• fs.read should be used if one does not want the whole file
  • agreed
• fs.read and fs.write chaning the position is unexpected
  • well, undocumented, yes, but expected (EDIT: at least by those familiar with the underlying C calls) because its what happens on Windows, Linux,and all other runtimes that use fds to read and write files (all of them?)
• fs.readFile non-seekable should either read everything it can or throw an error
  • agreed