Skip to content

Include l2tp Kernel-Modules #469

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Closed
fmu83 opened this issue Dec 22, 2013 · 1 comment
Closed

Include l2tp Kernel-Modules #469

fmu83 opened this issue Dec 22, 2013 · 1 comment

Comments

@fmu83
Copy link

fmu83 commented Dec 22, 2013

Can you include

l2tp_eth
l2tp_netlink

as module?

I try to compile the modules multiple times seperatly but they did not fit to my my current installed kernel, so it would be nice to have them in the official kernel.
@fmu83 fmu83 closed this as completed Dec 22, 2013
@fmu83 fmu83 reopened this Dec 22, 2013
@notro notro mentioned this issue Dec 29, 2014
Closed
@P33M
Copy link
Contributor

P33M commented Jul 14, 2015

Is enabled.

CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m

@P33M P33M closed this as completed Jul 14, 2015
popcornmix pushed a commit that referenced this issue Dec 16, 2021
@josefbacik @gregkh
btrfs: clear extent buffer uptodate when we fail to write it
41b3cc5 
commit c2e3930 upstream.

I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ #469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: [email protected] # 5.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Dec 16, 2021
@josefbacik @kdave
btrfs: clear extent buffer uptodate when we fail to write it
c2e3930 
I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ #469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: [email protected] # 5.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
popcornmix pushed a commit that referenced this issue Dec 16, 2021
@josefbacik @gregkh
btrfs: clear extent buffer uptodate when we fail to write it
0338e44 
commit c2e3930 upstream.

I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ #469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: [email protected] # 5.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
nguyenanhgiau pushed a commit to nguyenanhgiau/linux that referenced this issue Jan 5, 2022
@josefbacik @gregkh
btrfs: clear extent buffer uptodate when we fail to write it
aa4740b 
commit c2e3930 upstream.

I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ raspberrypi#469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: [email protected] # 5.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Mar 9, 2022
@YuKuai-huawei @gregkh
blktrace: fix use after free for struct blk_trace
78acc7d 
commit 3093929 upstream.

When tracing the whole disk, 'dropped' and 'msg' will be created
under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free()
won't remove those files. What's worse, the following UAF can be
triggered because of accessing stale 'dropped' and 'msg':

==================================================================
BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100
Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188

CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_address_description.constprop.0.cold+0xab/0x381
 ? blk_dropped_read+0x89/0x100
 ? blk_dropped_read+0x89/0x100
 kasan_report.cold+0x83/0xdf
 ? blk_dropped_read+0x89/0x100
 kasan_check_range+0x140/0x1b0
 blk_dropped_read+0x89/0x100
 ? blk_create_buf_file_callback+0x20/0x20
 ? kmem_cache_free+0xa1/0x500
 ? do_sys_openat2+0x258/0x460
 full_proxy_read+0x8f/0xc0
 vfs_read+0xc6/0x260
 ksys_read+0xb9/0x150
 ? vfs_write+0x3d0/0x3d0
 ? fpregs_assert_state_consistent+0x55/0x60
 ? exit_to_user_mode_prepare+0x39/0x1e0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fbc080d92fd
Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1
RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd
RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045
RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd
R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0
R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8
 </TASK>

Allocated by task 1050:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 do_blk_trace_setup+0xcb/0x410
 __blk_trace_setup+0xac/0x130
 blk_trace_ioctl+0xe9/0x1c0
 blkdev_ioctl+0xf1/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 1050:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x103/0x180
 kfree+0x9a/0x4c0
 __blk_trace_remove+0x53/0x70
 blk_trace_ioctl+0x199/0x1c0
 blkdev_common_ioctl+0x5e9/0xb30
 blkdev_ioctl+0x1a5/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88816912f380
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 88 bytes inside of
 96-byte region [ffff88816912f380, ffff88816912f3e0)
The buggy address belongs to the page:
page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                                                    ^
 ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================

Fixes: c0ea576 ("blktrace: remove debugfs file dentries from struct blk_trace")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Mar 15, 2022
@YuKuai-huawei @gregkh
blktrace: fix use after free for struct blk_trace
6418634 
commit 3093929 upstream.

When tracing the whole disk, 'dropped' and 'msg' will be created
under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free()
won't remove those files. What's worse, the following UAF can be
triggered because of accessing stale 'dropped' and 'msg':

==================================================================
BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100
Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188

CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_address_description.constprop.0.cold+0xab/0x381
 ? blk_dropped_read+0x89/0x100
 ? blk_dropped_read+0x89/0x100
 kasan_report.cold+0x83/0xdf
 ? blk_dropped_read+0x89/0x100
 kasan_check_range+0x140/0x1b0
 blk_dropped_read+0x89/0x100
 ? blk_create_buf_file_callback+0x20/0x20
 ? kmem_cache_free+0xa1/0x500
 ? do_sys_openat2+0x258/0x460
 full_proxy_read+0x8f/0xc0
 vfs_read+0xc6/0x260
 ksys_read+0xb9/0x150
 ? vfs_write+0x3d0/0x3d0
 ? fpregs_assert_state_consistent+0x55/0x60
 ? exit_to_user_mode_prepare+0x39/0x1e0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fbc080d92fd
Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1
RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd
RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045
RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd
R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0
R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8
 </TASK>

Allocated by task 1050:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 do_blk_trace_setup+0xcb/0x410
 __blk_trace_setup+0xac/0x130
 blk_trace_ioctl+0xe9/0x1c0
 blkdev_ioctl+0xf1/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 1050:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x103/0x180
 kfree+0x9a/0x4c0
 __blk_trace_remove+0x53/0x70
 blk_trace_ioctl+0x199/0x1c0
 blkdev_common_ioctl+0x5e9/0xb30
 blkdev_ioctl+0x1a5/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88816912f380
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 88 bytes inside of
 96-byte region [ffff88816912f380, ffff88816912f3e0)
The buggy address belongs to the page:
page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                                                    ^
 ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================

Fixes: c0ea576 ("blktrace: remove debugfs file dentries from struct blk_trace")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix pushed a commit that referenced this issue Mar 15, 2022
@YuKuai-huawei @axboe
blktrace: fix use after free for struct blk_trace
3093929 
When tracing the whole disk, 'dropped' and 'msg' will be created
under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free()
won't remove those files. What's worse, the following UAF can be
triggered because of accessing stale 'dropped' and 'msg':

==================================================================
BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100
Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188

CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_address_description.constprop.0.cold+0xab/0x381
 ? blk_dropped_read+0x89/0x100
 ? blk_dropped_read+0x89/0x100
 kasan_report.cold+0x83/0xdf
 ? blk_dropped_read+0x89/0x100
 kasan_check_range+0x140/0x1b0
 blk_dropped_read+0x89/0x100
 ? blk_create_buf_file_callback+0x20/0x20
 ? kmem_cache_free+0xa1/0x500
 ? do_sys_openat2+0x258/0x460
 full_proxy_read+0x8f/0xc0
 vfs_read+0xc6/0x260
 ksys_read+0xb9/0x150
 ? vfs_write+0x3d0/0x3d0
 ? fpregs_assert_state_consistent+0x55/0x60
 ? exit_to_user_mode_prepare+0x39/0x1e0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fbc080d92fd
Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1
RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd
RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045
RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd
R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0
R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8
 </TASK>

Allocated by task 1050:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 do_blk_trace_setup+0xcb/0x410
 __blk_trace_setup+0xac/0x130
 blk_trace_ioctl+0xe9/0x1c0
 blkdev_ioctl+0xf1/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 1050:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x103/0x180
 kfree+0x9a/0x4c0
 __blk_trace_remove+0x53/0x70
 blk_trace_ioctl+0x199/0x1c0
 blkdev_common_ioctl+0x5e9/0xb30
 blkdev_ioctl+0x1a5/0x390
 __x64_sys_ioctl+0xa5/0xe0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88816912f380
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 88 bytes inside of
 96-byte region [ffff88816912f380, ffff88816912f3e0)
The buggy address belongs to the page:
page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                                                    ^
 ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================

Fixes: c0ea576 ("blktrace: remove debugfs file dentries from struct blk_trace")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@P33M @fmu83