Description
Describe the bug
A few days ago I decided to make something like a NAS out of my Raspberry Pi 3 Model B Rev 1.2. Okay, I know, big words. I simply connected the SSD with a USB cable, configured the system and it worked. I have one problem though. I don't expect miracles from this set. Raspberry has a lan with a speed of up to 100mbit, so I can realistically achieve results at the level of 86mbit. Writing to an SSD via USB 2.0 is also not a surprise to me, but I consider 28.6 MB/s a really good result.
So where does the problem occur? Well, when I try to download anything (from the Internet), the download speed does not exceed 1.4 MB/s (i.e. plus or minus 10Mbit per second). Is there any solution for this?
I'm pretty sure there's a bug somewhere, but I can't find it.
Steps to reproduce the behaviour
Downloading a file with wget:
root@rpi:~# wget https://speed.hetzner.de/1GB.bin
2023-01-14 08:55:55 (1.49 MB/s) - ‘1GB.bin’ saved [1048576000/1048576000]
And downloading the same file using axel:
root@rpi:~# axel -n 5 https://speed.hetzner.de/1GB.bin
Downloaded 1000 Megabyte(s) in 3:01 minute(s). (5638.71 KB/s)
Almost 5x faster!
root@rpi:~# speedtest
Idle Latency: 4.42 ms (jitter: 0.14ms, low: 4.31ms, high: 4.53ms)
Download: 86.27 Mbps (data used: 46.5 MB)
7.94 ms (jitter: 2.61ms, low: 4.46ms, high: 27.04ms)
Upload: 88.38 Mbps (data used: 45.4 MB)
10.48 ms (jitter: 2.84ms, low: 5.98ms, high: 29.98ms)
Packet Loss: 0.0%
Any ideas?
Device (s)
Raspberry Pi 3 Mod. B
System
System Information
Raspberry Pi 3 Model B Rev 1.2
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
Raspberry Pi reference 2022-09-22
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 005a8c73b05a2cab394073150208bf4f069e861a, stage2
Linux rpi 5.15.76-v8+ #1597 SMP PREEMPT Fri Nov 4 12:16:41 GMT 2022 aarch64 GNU/Linux
Revision : a02082
Serial : 000000009507a5a9
Model : Raspberry Pi 3 Model B Rev 1.2
Throttled flag : throttled=0x0
Camera : supported=1 detected=1, libcamera interfaces=0
Videocore information
Oct 26 2022 11:11:31
Copyright (c) 2012 Broadcom
version c72ad6b26ff40c91ef776b847436094ee63fabee (clean) (release) (start_x)
alloc failures: 0
compactions: 0
legacy block fails: 0
Filesystem information
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 922738220 81090196 804118892 10% /
devtmpfs 405496 0 405496 0% /dev
tmpfs 440184 0 440184 0% /dev/shm
tmpfs 176076 2688 173388 2% /run
tmpfs 5120 4 5116 1% /run/lock
/dev/sda1 261108 31264 229844 12% /boot
tmpfs 440184 12 440172 1% /tmp/ramdisk
tmpfs 88036 0 88036 0% /run/user/0
Filename Type Size Used Priority
/var/swap file 102396 7488 -2
Package version information
raspberrypi-ui-mods:
Installed: (none)
raspberrypi-sys-mods:
Installed: 20221019
openbox:
Installed: (none)
lxpanel:
Installed: (none)
pcmanfm:
Installed: (none)
rpd-plym-splash:
Installed: (none)
Networking Information
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 1857495 bytes 2490632461 (2.3 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 724619 bytes 119688595 (114.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 1130 bytes 57235 (55.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1130 bytes 57235 (55.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
USB Information
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
config.txt
aphy_params_current=819
arm_64bit=1
arm_freq=1200
arm_freq_min=600
audio_pwm_mode=514
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x387520
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
dvfs=3
enable_tvout=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
init_uart_clock=0x2dc6c00
lcd_framerate=60
max_framebuffers=2
over_voltage_avs=0x249f0
pause_burst_frames=1
program_serial_random=1
sdram_freq=450
total_mem=1024
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=
cmdline.txt
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4c30a136-02 rootfstype=ext4 fsck.repair=yes rootwait
raspi-gpio settings
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT
GPIO 1: level=1 fsel=0 func=INPUT
GPIO 2: level=1 fsel=4 alt=0 func=SDA1
GPIO 3: level=1 fsel=4 alt=0 func=SCL1
GPIO 4: level=1 fsel=0 func=INPUT
GPIO 5: level=1 fsel=0 func=INPUT
GPIO 6: level=1 fsel=0 func=INPUT
GPIO 7: level=1 fsel=1 func=OUTPUT
GPIO 8: level=1 fsel=1 func=OUTPUT
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK
GPIO 12: level=0 fsel=0 func=INPUT
GPIO 13: level=0 fsel=0 func=INPUT
GPIO 14: level=0 fsel=0 func=INPUT
GPIO 15: level=1 fsel=0 func=INPUT
GPIO 16: level=0 fsel=0 func=INPUT
GPIO 17: level=0 fsel=0 func=INPUT
GPIO 18: level=0 fsel=0 func=INPUT
GPIO 19: level=0 fsel=0 func=INPUT
GPIO 20: level=0 fsel=0 func=INPUT
GPIO 21: level=0 fsel=0 func=INPUT
GPIO 22: level=0 fsel=0 func=INPUT
GPIO 23: level=0 fsel=0 func=INPUT
GPIO 24: level=0 fsel=0 func=INPUT
GPIO 25: level=0 fsel=0 func=INPUT
GPIO 26: level=1 fsel=0 func=INPUT
GPIO 27: level=0 fsel=0 func=INPUT
BANK1 (GPIO 28 to 45):
GPIO 28: level=0 fsel=0 func=INPUT
GPIO 29: level=1 fsel=1 func=OUTPUT
GPIO 30: level=0 fsel=0 func=INPUT
GPIO 31: level=0 fsel=0 func=INPUT
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
GPIO 34: level=1 fsel=0 func=INPUT
GPIO 35: level=1 fsel=0 func=INPUT
GPIO 36: level=1 fsel=0 func=INPUT
GPIO 37: level=1 fsel=0 func=INPUT
GPIO 38: level=1 fsel=0 func=INPUT
GPIO 39: level=1 fsel=0 func=INPUT
GPIO 40: level=0 fsel=4 alt=0 func=PWM0
GPIO 41: level=0 fsel=4 alt=0 func=PWM1
GPIO 42: level=0 fsel=4 alt=0 func=GPCLK1
GPIO 43: level=1 fsel=4 alt=0 func=GPCLK2
GPIO 44: level=1 fsel=0 func=INPUT
GPIO 45: level=1 fsel=0 func=INPUT
BANK2 (GPIO 46 to 53):
GPIO 46: level=1 fsel=0 func=INPUT
GPIO 47: level=1 fsel=1 func=OUTPUT
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3
vcdbg log messages
sudo: vcdbg: command not found
dmesg log
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.76-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP PREEMPT Fri Nov 4 12:16:41 GMT 2022
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000034000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688
[ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 225792
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4c30a136-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 810992K/917504K available (11520K kernel code, 1956K rwdata, 4148K rodata, 3840K init, 975K bss, 40976K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 38059 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000397] Console: colour dummy device 80x25
[ 0.001311] printk: console [tty1] enabled
[ 0.001394] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001460] pid_max: default: 32768 minimum: 301
[ 0.001682] LSM: Security Framework initializing
[ 0.001969] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002037] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003758] cgroup: Disabling memory control group subsystem
[ 0.007817] rcu: Hierarchical SRCU implementation.
[ 0.009318] EFI services will not be available.
[ 0.010067] smp: Bringing up secondary CPUs ...
[ 0.011634] Detected VIPT I-cache on CPU1
[ 0.011729] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.013486] Detected VIPT I-cache on CPU2
[ 0.013552] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.015210] Detected VIPT I-cache on CPU3
[ 0.015269] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.015481] smp: Brought up 1 node, 4 CPUs
[ 0.015638] SMP: Total of 4 processors activated.
[ 0.015672] CPU features: detected: 32-bit EL0 Support
[ 0.015704] CPU features: detected: 32-bit EL1 Support
[ 0.015739] CPU features: detected: CRC32 instructions
[ 0.055961] CPU: All CPU(s) started at EL2
[ 0.056109] alternatives: patching kernel code
[ 0.058115] devtmpfs: initialized
[ 0.079875] Enabled cp15_barrier support
[ 0.079959] Enabled setend support
[ 0.080005] KASLR enabled
[ 0.080293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.080364] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.083572] pinctrl core: initialized pinctrl subsystem
[ 0.084839] DMI not present or invalid.
[ 0.085824] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.096991] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.097601] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.099112] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.099300] audit: initializing netlink subsys (disabled)
[ 0.099771] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1
[ 0.100663] thermal_sys: Registered thermal governor 'step_wise'
[ 0.101041] cpuidle: using governor menu
[ 0.101620] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.101926] ASID allocator initialised with 32768 entries
[ 0.102188] Serial: AMBA PL011 UART driver
[ 0.114211] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.137103] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:11:31, variant start_x
[ 0.141121] raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
[ 0.201245] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.206769] vgaarb: loaded
[ 0.207441] SCSI subsystem initialized
[ 0.207780] usbcore: registered new interface driver usbfs
[ 0.207882] usbcore: registered new interface driver hub
[ 0.208013] usbcore: registered new device driver usb
[ 0.208503] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.208829] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.209237] pps_core: LinuxPPS API ver. 1 registered
[ 0.209274] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.209338] PTP clock support registered
[ 0.211634] clocksource: Switched to clocksource arch_sys_counter
[ 0.336437] VFS: Disk quotas dquot_6.6.0
[ 0.336616] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.336886] FS-Cache: Loaded
[ 0.337221] CacheFiles: Loaded
[ 0.352618] NET: Registered PF_INET protocol family
[ 0.352984] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.355053] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.355144] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.355202] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.355355] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.355584] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.355936] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.356023] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.356981] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.358252] RPC: Registered named UNIX socket transport module.
[ 0.358296] RPC: Registered udp transport module.
[ 0.358329] RPC: Registered tcp transport module.
[ 0.358361] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.358408] PCI: CLS 0 bytes, default 64
[ 0.360495] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.360855] kvm [1]: IPA Size Limit: 40 bits
[ 0.362569] kvm [1]: Hyp mode initialized successfully
[ 1.718927] Initialise system trusted keyrings
[ 1.719454] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.730122] zbud: loaded
[ 1.732955] FS-Cache: Netfs 'nfs' registered for caching
[ 1.733933] NFS: Registering the id_resolver key type
[ 1.734003] Key type id_resolver registered
[ 1.734038] Key type id_legacy registered
[ 1.734212] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.734254] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.736018] Key type asymmetric registered
[ 1.736059] Asymmetric key parser 'x509' registered
[ 1.736193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.736637] io scheduler mq-deadline registered
[ 1.736677] io scheduler kyber registered
[ 1.745186] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.765465] Console: switching to colour frame buffer device 90x30
[ 1.774198] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 720x480
[ 1.785803] bcm2835-rng 3f104000.rng: hwrng registered
[ 1.789651] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.797538] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 1.820336] brd: module loaded
[ 1.838356] loop: module loaded
[ 1.842421] Loading iSCSI transport class v2.0-870.
[ 1.852146] usbcore: registered new interface driver r8152
[ 1.855346] usbcore: registered new interface driver lan78xx
[ 1.858438] usbcore: registered new interface driver smsc95xx
[ 1.861930] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.593129] Core Release: 2.80a
[ 2.596132] Setting default values for core params
[ 2.599090] Finished setting default values for core params
[ 2.802501] Using Buffer DMA mode
[ 2.805352] Periodic Transfer Interrupt Enhancement - disabled
[ 2.808290] Multiprocessor Interrupt Enhancement - disabled
[ 2.811226] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.814125] Dedicated Tx FIFOs mode
[ 2.817775] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc008471000 dma = 0x00000000f4410000 len=9024
[ 2.826352] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 2.840113] dwc_otg: Microframe scheduler enabled
[ 2.840164] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc00806d000
[ 2.845278] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.847934] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.850654] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 2.853340] Init: Port Power? op_state=1
[ 2.856020] Init: Power Port (0)
[ 2.859194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.864756] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.867736] usb usb1: Product: DWC OTG Controller
[ 2.870641] usb usb1: Manufacturer: Linux 5.15.76-v8+ dwc_otg_hcd
[ 2.873595] usb usb1: SerialNumber: 3f980000.usb
[ 2.877519] hub 1-0:1.0: USB hub found
[ 2.880461] hub 1-0:1.0: 1 port detected
[ 2.884430] dwc_otg: FIQ enabled
[ 2.884450] dwc_otg: NAK holdoff enabled
[ 2.884464] dwc_otg: FIQ split-transaction FSM enabled
[ 2.884486] Module dwc_common_port init
[ 2.885314] usbcore: registered new interface driver uas
[ 2.888313] usbcore: registered new interface driver usb-storage
[ 2.891454] mousedev: PS/2 mouse device common for all mice
[ 2.899795] sdhci: Secure Digital Host Controller Interface driver
[ 2.902543] sdhci: Copyright(c) Pierre Ossman
[ 2.905859] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.912348] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.915949] hid: raw HID events driver (C) Jiri Kosina
[ 2.919000] usbcore: registered new interface driver usbhid
[ 2.921873] usbhid: USB HID core driver
[ 2.925146] ashmem: initialized
[ 2.936441] NET: Registered PF_PACKET protocol family
[ 2.939416] Key type dns_resolver registered
[ 2.944184] registered taskstats version 1
[ 2.946896] Loading compiled-in X.509 certificates
[ 2.950470] Key type ._fscrypt registered
[ 2.953225] Key type .fscrypt registered
[ 2.955867] Key type fscrypt-provisioning registered
[ 2.977696] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 2.980511] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[ 2.991375] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.994805] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.995880] Indeed it is in host mode hprt0 = 00021501
[ 3.000177] sdhost: log_buf @ 000000008776a828 (c268a000)
[ 3.060486] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.068064] of_cfs_init
[ 3.071095] of_cfs_init: OK
[ 3.075344] Waiting for root device PARTUUID=4c30a136-02...
[ 3.187666] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.190731] Indeed it is in host mode hprt0 = 00001101
[ 3.400144] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.405930] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.410255] hub 1-1:1.0: USB hub found
[ 3.413511] hub 1-1:1.0: 5 ports detected
[ 3.703691] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.804174] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 3.810394] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.816752] smsc95xx v2.0.0
[ 3.916672] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
[ 3.924723] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m
[ 4.155690] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 4.337257] usb 1-1.2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.00
[ 4.344301] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.347994] usb 1-1.2: Product: USB3.0 External HDD
[ 4.351631] usb 1-1.2: Manufacturer: JMicron
[ 4.355198] usb 1-1.2: SerialNumber: 0000AB1235E3
[ 4.367552] usb 1-1.2: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 4.374946] usb 1-1.2: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 4.382622] usb 1-1.2: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 4.390189] usb 1-1.2: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 4.398005] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 4.402927] usb-storage 1-1.2:1.0: Quirks match for vid 152d pid 0578: 1000000
[ 4.407303] scsi host0: usb-storage 1-1.2:1.0
[ 4.651679] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 4.762016] usb 1-1.3: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
[ 4.769793] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.773768] usb 1-1.3: Product: AX88179
[ 4.777594] usb 1-1.3: Manufacturer: ASIX Elec. Corp.
[ 4.781338] usb 1-1.3: SerialNumber: 007CC2C6420D04
[ 5.440755] scsi 0:0:0:0: Direct-Access Patriot Burst 8101 PQ: 0 ANSI: 6
[ 7.470592] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 7.475016] sd 0:0:0:0: [sda] Write Protect is off
[ 7.478692] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[ 7.479341] sd 0:0:0:0: [sda] Disabling FUA
[ 7.482953] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.495875] sda: sda1 sda2
[ 7.502287] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.675968] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 7.683085] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 7.693477] devtmpfs: mounted
[ 7.707818] Freeing unused kernel memory: 3840K
[ 7.711340] Run /sbin/init as init process
[ 7.714591] with arguments:
[ 7.714606] /sbin/init
[ 7.714621] with environment:
[ 7.714633] HOME=/
[ 7.714647] TERM=linux
[ 8.120982] systemd[1]: System time before build time, advancing clock.
[ 8.382118] NET: Registered PF_INET6 protocol family
[ 8.387949] Segment Routing with IPv6
[ 8.391240] In-situ OAM (IOAM) with IPv6
[ 8.487050] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 8.498442] systemd[1]: Detected architecture arm64.
[ 8.551334] systemd[1]: Set hostname to .
[ 9.705947] systemd[1]: Queued start job for default target Multi-User System.
[ 9.716301] systemd[1]: Created slice system-getty.slice.
[ 9.726104] systemd[1]: Created slice system-modprobe.slice.
[ 9.735217] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.744328] systemd[1]: Created slice User and Session Slice.
[ 9.752562] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.760643] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.770120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.782528] systemd[1]: Reached target Local Encrypted Volumes.
[ 9.791101] systemd[1]: Reached target Paths.
[ 9.799293] systemd[1]: Reached target Slices.
[ 9.807246] systemd[1]: Reached target Swap.
[ 9.816619] systemd[1]: Listening on Syslog Socket.
[ 9.825789] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.834362] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.844261] systemd[1]: Listening on Journal Audit Socket.
[ 9.853479] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.863146] systemd[1]: Listening on Journal Socket.
[ 9.873820] systemd[1]: Listening on udev Control Socket.
[ 9.882818] systemd[1]: Listening on udev Kernel Socket.
[ 9.891786] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 9.904594] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.919375] systemd[1]: Mounting RPC Pipe File System...
[ 9.935914] systemd[1]: Mounting Kernel Debug File System...
[ 9.952823] systemd[1]: Mounting Kernel Trace File System...
[ 9.962391] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 9.979890] systemd[1]: Starting Restore / save the current clock...
[ 9.996082] systemd[1]: Starting Set the console keyboard layout...
[ 10.013603] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 10.034715] systemd[1]: Starting Load Kernel Module configfs...
[ 10.052751] systemd[1]: Starting Load Kernel Module drm...
[ 10.069717] systemd[1]: Starting Load Kernel Module fuse...
[ 10.092242] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 10.106946] systemd[1]: Starting File System Check on Root Device...
[ 10.144338] systemd[1]: Starting Journal Service...
[ 10.146598] fuse: init (API version 7.34)
[ 10.176018] systemd[1]: Starting Load Kernel Modules...
[ 10.213480] systemd[1]: Starting Coldplug All udev Devices...
[ 10.271285] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.289747] systemd[1]: Mounted RPC Pipe File System.
[ 10.306043] systemd[1]: Mounted Kernel Debug File System.
[ 10.317859] systemd[1]: Mounted Kernel Trace File System.
[ 10.331483] systemd[1]: Finished Restore / save the current clock.
[ 10.337699] i2c_dev: i2c /dev entries driver
[ 10.350690] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 10.366735] systemd[1]: [email protected]: Succeeded.
[ 10.373117] systemd[1]: Finished Load Kernel Module configfs.
[ 10.385051] systemd[1]: [email protected]: Succeeded.
[ 10.391792] systemd[1]: Finished Load Kernel Module drm.
[ 10.403341] systemd[1]: [email protected]: Succeeded.
[ 10.410105] systemd[1]: Finished Load Kernel Module fuse.
[ 10.423124] systemd[1]: Finished Load Kernel Modules.
[ 10.441281] systemd[1]: Mounting FUSE Control File System...
[ 10.461096] systemd[1]: Mounting Kernel Configuration File System...
[ 10.500133] systemd[1]: Started File System Check Daemon to report status.
[ 10.526066] systemd[1]: Starting Apply Kernel Variables...
[ 10.563551] systemd[1]: Mounted FUSE Control File System.
[ 10.584762] systemd[1]: Mounted Kernel Configuration File System.
[ 10.627470] systemd[1]: Finished Apply Kernel Variables.
[ 10.723253] systemd[1]: Started Journal Service.
[ 13.158448] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
[ 13.235047] systemd-journald[140]: Received client request to flush runtime journal.
[ 14.837210] mc: Linux media interface: v0.10
[ 14.851791] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.854845] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 14.854914] [vc_sm_connected_init]: start
[ 14.899108] [vc_sm_connected_init]: installed successfully
[ 15.176824] videodev: Linux video capture interface: v2.00
[ 15.261298] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.297169] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 15.301228] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.311722] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.316713] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.329301] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.366613] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.377399] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.654864] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 15.655583] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 15.655879] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 15.656439] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 15.657382] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 15.658067] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 15.658281] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 15.658318] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 15.658348] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 15.658375] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 15.668367] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 15.668451] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 15.669575] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 15.670382] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 15.672672] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 15.673256] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 15.673306] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 15.673341] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 15.673388] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 15.673416] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 15.673801] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 15.681450] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 15.681547] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 15.687943] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 15.688058] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 15.694017] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 15.694103] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 15.719649] bcm2835-v4l2-0: scene mode selected 0, was 0
[ 15.745143] bcm2835-v4l2-0: V4L2 device registered as video0 - stills mode > 1280x720
[ 15.750875] bcm2835-v4l2-0: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[ 15.807414] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.244351] ax88179_178a 1-1.3:1.0 eth1: register 'ax88179_178a' at usb-3f980000.usb-1.3, ASIX AX88179 USB 3.0 Gigabit Ethernet, m.m.m.m
[ 16.244654] usbcore: registered new interface driver ax88179_178a
[ 18.396915] uart-pl011 3f201000.serial: no DMA platform data
[ 18.600293] 8021q: 802.1Q VLAN Support v1.8
[ 18.989539] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 19.029826] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 19.107848] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 19.387374] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS
[ 19.667337] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 19.822384] smsc95xx 1-1.1:1.0 eth0: Link is Down
[ 22.746109] ax88179_178a 1-1.3:1.0 eth1: ax88179 - Link status is: 1
[ 22.775435] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 24.005776] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth1.retrans_time - use net.ipv6.neigh.eth1.retrans_time_ms instead
[ 25.430722] Bluetooth: Core ver 2.22
[ 25.430849] NET: Registered PF_BLUETOOTH protocol family
[ 25.430858] Bluetooth: HCI device and connection manager initialized
[ 25.430887] Bluetooth: HCI socket layer initialized
[ 25.430913] Bluetooth: L2CAP socket layer initialized
[ 25.430945] Bluetooth: SCO socket layer initialized
[ 25.465647] Bluetooth: HCI UART driver ver 2.3
[ 25.465678] Bluetooth: HCI UART protocol H4 registered
[ 25.465770] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 25.466041] Bluetooth: HCI UART protocol Broadcom registered
[ 25.777884] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.777910] Bluetooth: BNEP filters: protocol multicast
[ 25.777934] Bluetooth: BNEP socket layer initialized
[ 25.801466] NET: Registered PF_ALG protocol family
[ 33.763658] cam-dummy-reg: disabling
Logs
No response
Additional context
No response