Skip to content

One wire and I2C do not play well together. #545

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Closed
richard-tx opened this issue Mar 11, 2014 · 2 comments
Closed

One wire and I2C do not play well together. #545

richard-tx opened this issue Mar 11, 2014 · 2 comments

Comments

@richard-tx
Copy link

Version 12-20-2013

Enabling the one wire bus causes i2cdetect to show all available I2C addresses as occupied.

root@alphapi:# i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@alphapi:# modprobe w1-gpio
root@alphapi:# i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 UU 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77
root@alphapi:#
@richard-tx
Copy link
Author

I missed the version of wheeZy.

root@alphapi:~# uname -a
Linux alphapi 3.10.33+ #654 PREEMPT Fri Mar 7 16:32:08 GMT 2014 armv6l GNU/Linux

@popcornmix
Copy link
Collaborator

Duplicate of #435

@ajlennon ajlennon mentioned this issue May 26, 2014
Closed
popcornmix pushed a commit that referenced this issue Dec 18, 2017
@mchehab @gregkh
dvb_frontend: don't use-after-free the frontend struct
7bc8eb3 
commit b1cb737 upstream.

dvb_frontend_invoke_release() may free the frontend struct.
So, the free logic can't update it anymore after calling it.

That's OK, as __dvb_frontend_free() is called only when the
krefs are zeroed, so nobody is using it anymore.

That should fix the following KASAN error:

The KASAN report looks like this (running on kernel 3e0cc09 (4.14-rc5+)):
==================================================================
BUG: KASAN: use-after-free in __dvb_frontend_free+0x113/0x120
Write of size 8 at addr ffff880067d45a00 by task kworker/0:1/24

CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc5-43687-g06ab8a23e0e6 #545
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 print_address_description+0x78/0x280 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351
 kasan_report+0x23d/0x350 mm/kasan/report.c:409
 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435
 __dvb_frontend_free+0x113/0x120 drivers/media/dvb-core/dvb_frontend.c:156
 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Allocated by task 24:
 save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
 kmalloc ./include/linux/slab.h:493
 kzalloc ./include/linux/slab.h:666
 dtt200u_fe_attach+0x4c/0x110 drivers/media/usb/dvb-usb/dtt200u-fe.c:212
 dtt200u_frontend_attach+0x35/0x80 drivers/media/usb/dvb-usb/dtt200u.c:136
 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
 dvb_usb_device_init+0xf73/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
 dtt200u_usb_probe+0xa1/0xe0 drivers/media/usb/dvb-usb/dtt200u.c:155
 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
 hub_port_connect drivers/usb/core/hub.c:4903
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Freed by task 24:
 save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459
 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
 slab_free_hook mm/slub.c:1390
 slab_free_freelist_hook mm/slub.c:1412
 slab_free mm/slub.c:2988
 kfree+0xf6/0x2f0 mm/slub.c:3919
 dtt200u_fe_release+0x3c/0x50 drivers/media/usb/dvb-usb/dtt200u-fe.c:202
 dvb_frontend_invoke_release.part.13+0x1c/0x30 drivers/media/dvb-core/dvb_frontend.c:2790
 dvb_frontend_invoke_release drivers/media/dvb-core/dvb_frontend.c:2789
 __dvb_frontend_free+0xad/0x120 drivers/media/dvb-core/dvb_frontend.c:153
 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

The buggy address belongs to the object at ffff880067d45500
 which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 1280 bytes inside of
 2048-byte region [ffff880067d45500, ffff880067d45d00)
The buggy address belongs to the page:
page:ffffea00019f5000 count:1 mapcount:0 mapping:          (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 00000001000f000f
raw: dead000000000100 dead000000000200 ffff88006c002d80 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff880067d45900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff880067d45a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: ead6660 ("media: dvb_frontend: only use kref after initialized")

Reported-by: Andrey Konovalov <[email protected]>
Suggested-by: Matthias Schwarzott <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
nathanchance pushed a commit to nathanchance/pi-kernel that referenced this issue Jun 25, 2020
@gregkh
usb/ohci-platform: Fix a warning when hibernating
fbf719e 
[ Upstream commit 1cb3b00 ]

The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.

[  111.779649] ------------[ cut here ]------------
[  111.788382] URB (____ptrval____) submitted while active
[  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[  111.805417] Modules linked in:
[  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty raspberrypi#545
[  111.817796] Hardware name: ARM Juno development board (r2) (DT)
[  111.823896] Workqueue: usb_hub_wq hub_event
[  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[  111.833156] pc : usb_submit_urb+0x3d8/0x590
[  111.837471] lr : usb_submit_urb+0x3d8/0x590
[  111.841783] sp : ffff800018de38b0
[  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[  111.861635] x23: 0000000000000004 x22: 0000000000000c00
[  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[  111.889019] x13: 0720072007200720 x12: 0720072007200720
[  111.894496] x11: 0000000000000000 x10: 00000000a5286134
[  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[  111.927356] Call trace:
[  111.929892]  usb_submit_urb+0x3d8/0x590
[  111.933852]  hub_activate+0x108/0x7f0
[  111.937633]  hub_resume+0xac/0x148
[  111.941149]  usb_resume_interface.isra.10+0x60/0x138
[  111.946265]  usb_resume_both+0xe4/0x140
[  111.950225]  usb_runtime_resume+0x24/0x30
[  111.954365]  __rpm_callback+0xdc/0x138
[  111.958236]  rpm_callback+0x34/0x98
[  111.961841]  rpm_resume+0x4a8/0x720
[  111.965445]  rpm_resume+0x50c/0x720
[  111.969049]  __pm_runtime_resume+0x4c/0xb8
[  111.973276]  usb_autopm_get_interface+0x28/0x60
[  111.977948]  hub_event+0x80/0x16d8
[  111.981466]  process_one_work+0x2a4/0x748
[  111.985604]  worker_thread+0x48/0x498
[  111.989387]  kthread+0x13c/0x140
[  111.992725]  ret_from_fork+0x10/0x18
[  111.996415] irq event stamp: 354
[  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---

The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.

Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Qais Yousef <[email protected]>
CC: Tony Prisk <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Mathias Nyman <[email protected]>
CC: Oliver Neukum <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Jun 26, 2020
@gregkh
usb/ohci-platform: Fix a warning when hibernating
fc67821 
[ Upstream commit 1cb3b00 ]

The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.

[  111.779649] ------------[ cut here ]------------
[  111.788382] URB (____ptrval____) submitted while active
[  111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[  111.805417] Modules linked in:
[  111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[  111.817796] Hardware name: ARM Juno development board (r2) (DT)
[  111.823896] Workqueue: usb_hub_wq hub_event
[  111.828217] pstate: 60000005 (nZCv daif -PAN -UAO)
[  111.833156] pc : usb_submit_urb+0x3d8/0x590
[  111.837471] lr : usb_submit_urb+0x3d8/0x590
[  111.841783] sp : ffff800018de38b0
[  111.845205] x29: ffff800018de38b0 x28: 0000000000000003
[  111.850682] x27: ffff000970530b20 x26: ffff8000133fd000
[  111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38
[  111.861635] x23: 0000000000000004 x22: 0000000000000c00
[  111.867112] x21: 0000000000000000 x20: 00000000fffffff0
[  111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff
[  111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8
[  111.883542] x15: ffff8000133fda88 x14: 0720072007200720
[  111.889019] x13: 0720072007200720 x12: 0720072007200720
[  111.894496] x11: 0000000000000000 x10: 00000000a5286134
[  111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0
[  111.905449] x7 : 0000000000000000 x6 : ffff800018de3570
[  111.910926] x5 : 0000000000000001 x4 : 0000000000000003
[  111.916401] x3 : 0000000000000000 x2 : ffff800013427118
[  111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000
[  111.927356] Call trace:
[  111.929892]  usb_submit_urb+0x3d8/0x590
[  111.933852]  hub_activate+0x108/0x7f0
[  111.937633]  hub_resume+0xac/0x148
[  111.941149]  usb_resume_interface.isra.10+0x60/0x138
[  111.946265]  usb_resume_both+0xe4/0x140
[  111.950225]  usb_runtime_resume+0x24/0x30
[  111.954365]  __rpm_callback+0xdc/0x138
[  111.958236]  rpm_callback+0x34/0x98
[  111.961841]  rpm_resume+0x4a8/0x720
[  111.965445]  rpm_resume+0x50c/0x720
[  111.969049]  __pm_runtime_resume+0x4c/0xb8
[  111.973276]  usb_autopm_get_interface+0x28/0x60
[  111.977948]  hub_event+0x80/0x16d8
[  111.981466]  process_one_work+0x2a4/0x748
[  111.985604]  worker_thread+0x48/0x498
[  111.989387]  kthread+0x13c/0x140
[  111.992725]  ret_from_fork+0x10/0x18
[  111.996415] irq event stamp: 354
[  111.999756] hardirqs last  enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[  112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[  112.017479] softirqs last  enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[  112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150
[  112.034129] ---[ end trace dc96030b9cf6c8a3 ]---

The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.

Link: https://lore.kernel.org/lkml/[email protected]/
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Qais Yousef <[email protected]>
CC: Tony Prisk <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Mathias Nyman <[email protected]>
CC: Oliver Neukum <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Oct 29, 2020
@danieljordan10 @gregkh
module: statically initialize init section freeing data
1ed7508 
[ Upstream commit fdf09ab ]

Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:

  WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
  Modules linked in: ghash_generic
  CPU: 2 PID: 147 Comm: modprobe Not tainted
      5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
  Hardware name: Pine H64 model A (DT)
  pc : __queue_work+0x3b8/0x3d0
  Call trace:
   __queue_work+0x3b8/0x3d0
   queue_work_on+0x6c/0x90
   do_init_module+0x188/0x1f0
   load_module+0x1d00/0x22b0

I wasn't able to reproduce on x86 or rpi 3b+.

This is

  WARN_ON(!list_empty(&work->entry))

from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module.  Some crypto tests were recently moved earlier in boot as
explained in commit c4741b2 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.

Avoid the warning by statically initializing init_free_wq and the
corresponding llist.

Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d9 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Oct 29, 2020
@danieljordan10 @gregkh
module: statically initialize init section freeing data
79d50bf 
[ Upstream commit fdf09ab ]

Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:

  WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
  Modules linked in: ghash_generic
  CPU: 2 PID: 147 Comm: modprobe Not tainted
      5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
  Hardware name: Pine H64 model A (DT)
  pc : __queue_work+0x3b8/0x3d0
  Call trace:
   __queue_work+0x3b8/0x3d0
   queue_work_on+0x6c/0x90
   do_init_module+0x188/0x1f0
   load_module+0x1d00/0x22b0

I wasn't able to reproduce on x86 or rpi 3b+.

This is

  WARN_ON(!list_empty(&work->entry))

from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module.  Some crypto tests were recently moved earlier in boot as
explained in commit c4741b2 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.

Avoid the warning by statically initializing init_free_wq and the
corresponding llist.

Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d9 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
popcornmix pushed a commit that referenced this issue Nov 4, 2020
@danieljordan10 @gregkh
module: statically initialize init section freeing data
963fc20 
[ Upstream commit fdf09ab ]

Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:

  WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
  Modules linked in: ghash_generic
  CPU: 2 PID: 147 Comm: modprobe Not tainted
      5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
  Hardware name: Pine H64 model A (DT)
  pc : __queue_work+0x3b8/0x3d0
  Call trace:
   __queue_work+0x3b8/0x3d0
   queue_work_on+0x6c/0x90
   do_init_module+0x188/0x1f0
   load_module+0x1d00/0x22b0

I wasn't able to reproduce on x86 or rpi 3b+.

This is

  WARN_ON(!list_empty(&work->entry))

from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module.  Some crypto tests were recently moved earlier in boot as
explained in commit c4741b2 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.

Avoid the warning by statically initializing init_free_wq and the
corresponding llist.

Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d9 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@popcornmix @richard-tx