Add support for configuring pin for w1-gpio kernel module #458
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit cba9a90 upstream. According to create_thread(3): "The new thread does not inherit the creating thread's alternate signal stack". Since commit f9a3879 (Fix sigaltstack corruption among cloned threads), current->sas_ss_size is set to 0 for cloned processes sharing VM with their parent. Don't use the (nonexistent) alternate signal stack in this case. This has been broken since commit 29c4dfd ([XTENSA] Remove non-rt signal handling). Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc. Signed-off-by: Baruch Siach <[email protected]> Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5a73633 upstream. In the next commit this function will be used in the uio subsystem Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7294151 upstream. This makes it possible to let gdb access mappings of the process that is being debugged. uio_mmap_logical was moved and uio_vm_ops renamed to group related code and differentiate to new stuff. Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c607f45 upstream. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1fca06f upstream. ... and single return is quite sufficient to get out of function, TYVM Signed-off-by: Al Viro <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7314e61 upstream. Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde <[email protected]> Signed-off-by: Linus Torvalds <[email protected]. Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3d77b50 upstream. Commit b1adaf6 ("[SCSI] block: add sg buffer copy helper functions") introduces two sg buffer copy helpers, and calls flush_kernel_dcache_page() on pages in SG list after these pages are written to. Unfortunately, the commit may introduce a potential bug: - Before sending some SCSI commands, kmalloc() buffer may be passed to block layper, so flush_kernel_dcache_page() can see a slab page finally - According to cachetlb.txt, flush_kernel_dcache_page() is only called on "a user page", which surely can't be a slab page. - ARCH's implementation of flush_kernel_dcache_page() may use page mapping information to do optimization so page_mapping() will see the slab page, then VM_BUG_ON() is triggered. Aaro Koskinen reported the bug on ARM/kirkwood when DEBUG_VM is enabled, and this patch fixes the bug by adding test of '!PageSlab(miter->page)' before calling flush_kernel_dcache_page(). Signed-off-by: Ming Lei <[email protected]> Reported-by: Aaro Koskinen <[email protected]> Tested-by: Simon Baatz <[email protected]> Cc: Russell King - ARM Linux <[email protected]> Cc: Will Deacon <[email protected]> Cc: Aaro Koskinen <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: FUJITA Tomonori <[email protected]> Cc: Tejun Heo <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f856567 upstream. In commit d496f94 ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2f9f64b upstream. The order of arguments in the call to vco_set() for the ICST clocks appears to have been switched in error, which results in the VCO not being initialised correctly. This in turn stops the integrated LCD on things like Integrator/CP from working correctly. This patch fixes the order and restores the expected functionality. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Jonathan Austin <[email protected]> Signed-off-by: Mike Turquette <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1dd49bf upstream. If another task handled a hinting fault in parallel then do not double account for it. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 42836f5 upstream. The locking for migrating THP is unusual. While normal page migration prevents parallel accesses using a migration PTE, THP migration relies on a combination of the page_table_lock, the page lock and the existance of the NUMA hinting PTE to guarantee safety but there is a bug in the scheme. If a THP page is currently being migrated and another thread traps a fault on the same page it checks if the page is misplaced. If it is not, then pmd_numa is cleared. The problem is that it checks if the page is misplaced without holding the page lock meaning that the racing thread can be migrating the THP when the second thread clears the NUMA bit and faults a stale page. This patch checks if the page is potentially being migrated and stalls using the lock_page if it is potentially being migrated before checking if the page is misplaced or not. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 587fe58 upstream. THP migrations are serialised by the page lock but on its own that does not prevent THP splits. If the page is split during THP migration then the pmd_same checks will prevent page table corruption but the unlock page and other fix-ups potentially will cause corruption. This patch takes the anon_vma lock to prevent parallel splits during migration. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c61109e upstream. There are three callers of task_numa_fault(): - do_huge_pmd_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_pmd_numa_page(): Accounts not at all when the page isn't migrated, otherwise accounts against the node we migrated towards. This seems wrong to me; all three sites should have the same sementaics, furthermore we should accounts against where the page really is, we already know where the task is. So modify all three sites to always account; we did after all receive the fault; and always account to where the page is after migration, regardless of success. They all still differ on when they clear the PTE/PMD; ideally that would get sorted too. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3f926ab upstream. THP migration uses the page lock to guard against parallel allocations but there are cases like this still open Task A Task B --------------------- --------------------- do_huge_pmd_numa_page do_huge_pmd_numa_page lock_page mpol_misplaced == -1 unlock_page goto clear_pmdnuma lock_page mpol_misplaced == 2 migrate_misplaced_transhuge pmd = pmd_mknonnuma set_pmd_at During hours of testing, one crashed with weird errors and while I have no direct evidence, I suspect something like the race above happened. This patch extends the page lock to being held until the pmd_numa is cleared to prevent migration starting in parallel while the pmd_numa is being cleared. It also flushes the old pmd entry and orders pagetable insertion before rmap insertion. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0255d49 upstream. A THP PMD update is accounted for as 512 pages updated in vmstat. This is large difference when estimating the cost of automatic NUMA balancing and can be misleading when comparing results that had collapsed versus split THP. This patch addresses the accounting issue. Signed-off-by: Mel Gorman <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Srikar Dronamraju <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3017f07 upstream. When walk_page_range walk a memory map's page tables, it'll skip VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it maybe larger than 'end'. In next loop, 'addr' will be larger than 'next'. Then in /proc/XXXX/pagemap file reading procedure, the 'addr' will growing forever in pagemap_pte_range, pte_to_pagemap_entry will access the wrong pte. BUG: Bad page map in process procrank pte:8437526f pmd:785de067 addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping: (null) index:9108d CPU: 1 PID: 4974 Comm: procrank Tainted: G B W O 3.10.1+ raspberrypi#1 Call Trace: dump_stack+0x16/0x18 print_bad_pte+0x114/0x1b0 vm_normal_page+0x56/0x60 pagemap_pte_range+0x17a/0x1d0 walk_page_range+0x19e/0x2c0 pagemap_read+0x16e/0x200 vfs_read+0x84/0x150 SyS_read+0x4a/0x80 syscall_call+0x7/0xb Signed-off-by: Liu ShuoX <[email protected]> Signed-off-by: Chen LinX <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Reviewed-by: Naoya Horiguchi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit bcb615a upstream. When searching a vmap area in the vmalloc space, we use (addr + size - 1) to check if the value is less than addr, which is an overflow. But we assign (addr + size) to vmap_area->va_end. So if we come across the below case: (addr + size - 1) : not overflow (addr + size) : overflow we will assign an overflow value (e.g 0) to vmap_area->va_end, And this will trigger BUG in __insert_vmap_area, causing system panic. So using (addr + size) to check the overflow should be the correct behaviour, not (addr + size - 1). Signed-off-by: Zhang Yanfei <[email protected]> Reported-by: Ghennadi Procopciuc <[email protected]> Tested-by: Daniel Baluta <[email protected]> Cc: David Rientjes <[email protected]> Cc: Minchan Kim <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Cc: Anatoly Muliarski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2668248 upstream. The evict code may try to swap them out causing a BUG in the destroy function. Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c424985 upstream. DRI clients that tried to grab the TTM lock when the master (X server) was switched away during a VT switch were sent the SIGTERM signal by the kernel. Fix this so that they are only sent that signal when the master has exited. Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Jakob Bornecrantz <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…ructs commit b062672 upstream. Apply the protections from commit 1b2f148 Author: Dave Airlie <[email protected]> Date: Sat Aug 14 20:20:34 2010 +1000 drm: block userspace under allocating buffer and having drivers overwrite it (v2) to the core ioctl structs as well, for we found one instance where there is a 32-/64-bit size mismatch and were guilty of writing beyond the end of the user's buffer. Signed-off-by: Chris Wilson <[email protected]> Cc: Dave Airlie <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit bc5bd37 upstream. Pavel Roskin reported that DRM_IOCTL_MODE_GETCONNECTOR was overwritting the 4 bytes beyond the end of its structure with a 32-bit userspace running on a 64-bit kernel. This is due to the padding gcc inserts as the drm_mode_get_connector struct includes a u64 and its size is not a natural multiple of u64s. 64-bit kernel: sizeof(drm_mode_get_connector)=80, alignof=8 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 32-bit userspace: sizeof(drm_mode_get_connector)=76, alignof=4 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 Fortuituously we can insert explicit padding to the tail of our structures without breaking ABI. Reported-by: Pavel Roskin <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: Dave Airlie <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c23632d upstream. Some rs780 asics seem to be affected as well. See: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60791 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 05e1674 upstream. This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by: Jiaxing Wang <[email protected]> Signed-off-by: Gu Zheng <[email protected]> Signed-off-by: Al Viro <[email protected]> Cc: Jonghwan Choi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3b12a0d upstream. If an error is encountered in ntb_device_setup, it is possible that the spci_cmd isn't populated. Writes to the offset can result in a NULL pointer dereference. This issue is easily encountered by running in NTB-RP mode, as it currently is not supported and will generate an error. To get around this issue, return if an error is encountered prior to attempting to write to the spci_cmd offset. Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8703451 upstream. The NTB Xeon hardware has 16 scratch pad registers and 16 back-to-back scratch pad registers. Correct the #define to represent this and update the variable names to reflect their usage. Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b6750cf upstream. Due to ambiguous documentation, the USD/DSD identification is backward when compared to the setting in BIOS. Correct the bits to match the BIOS setting. Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1517a3f upstream. Debugfs was setup in NTB to only have a single debugfs directory. This resulted in the leaking of debugfs directories and files when multiple NTB devices were present, due to each device stomping on the variables containing the previous device's values (thus preventing them from being freed on cleanup). Correct this by creating a secondary directory of the PCI BDF for each device present, and nesting the previously existing information in those directories. Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: popcornmix <[email protected]>
Signed-off-by: popcornmix <[email protected]>
commit c6f58d9 upstream. Andreas Herrmann writes: When I've used slub_debug kernel option (e.g. "slub_debug=,skbuff_fclone_cache" or similar) on a debug session I've seen a panic like: Highbank #setenv bootargs console=ttyAMA0 root=/dev/sda2 kgdboc.kgdboc=ttyAMA0,115200 slub_debug=,kmalloc-4096 earlyprintk=ttyAMA0 ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [raspberrypi#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.12.0-00048-gbe408cd raspberrypi#314 task: c0898360 ti: c088a000 task.ti: c088a000 PC is at strncmp+0x1c/0x84 LR is at kmem_cache_flags.isra.46.part.47+0x44/0x60 pc : [<c02c6da0>] lr : [<c0110a3c>] psr: 200001d3 sp : c088bea8 ip : c088beb8 fp : c088beb4 r10: 00000000 r9 : 413fc090 r8 : 00000001 r7 : 00000000 r6 : c2984a08 r5 : c0966e78 r4 : 00000000 r3 : 0000006b r2 : 0000000c r1 : 00000000 r0 : c2984a08 Flags: nzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 0000404a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc088a248) Stack: (0xc088bea8 to 0xc088c000) bea0: c088bed4 c088beb8 c0110a3c c02c6d90 c0966e78 00000040 bec0: ef001f00 00000040 c088bf14 c088bed8 c0112070 c0110a04 00000005 c010fac8 bee0: c088bf5c c088bef0 c010fac8 ef001f00 00000040 00000000 00000040 00000001 bf00: 413fc090 00000000 c088bf34 c088bf18 c0839190 c0112040 00000000 ef001f00 bf20: 00000000 00000000 c088bf54 c088bf38 c0839200 c083914c 00000006 c0961c4c bf40: c0961c28 00000000 c088bf7c c088bf58 c08392ac c08391c0 c08a2ed8 c0966e78 bf60: c086b874 c08a3f50 c0961c28 00000001 c088bfb4 c088bf80 c083b258 c0839248 bf80: 2f800000 0f000000 c08935b4 ffffffff c08cd400 ffffffff c08cd400 c0868408 bfa0: c29849c0 00000000 c088bff4 c088bfb8 c0824974 c083b1e4 ffffffff ffffffff bfc0: c08245c0 00000000 00000000 c0868408 00000000 10c5387d c0892bcc c0868404 bfe0: c0899440 0000406a 00000000 c088bff8 00008074 c0824824 00000000 00000000 [<c02c6da0>] (strncmp+0x1c/0x84) from [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60) [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60) from [<c0112070>] (__kmem_cache_create+0x3c/0x410) [<c0112070>] (__kmem_cache_create+0x3c/0x410) from [<c0839190>] (create_boot_cache+0x50/0x74) [<c0839190>] (create_boot_cache+0x50/0x74) from [<c0839200>] (create_kmalloc_cache+0x4c/0x88) [<c0839200>] (create_kmalloc_cache+0x4c/0x88) from [<c08392ac>] (create_kmalloc_caches+0x70/0x114) [<c08392ac>] (create_kmalloc_caches+0x70/0x114) from [<c083b258>] (kmem_cache_init+0x80/0xe0) [<c083b258>] (kmem_cache_init+0x80/0xe0) from [<c0824974>] (start_kernel+0x15c/0x318) [<c0824974>] (start_kernel+0x15c/0x318) from [<00008074>] (0x8074) Code: e3520000 01a00002 089da800 e5d03000 (e5d1c000) ---[ end trace 1b75b31a2719ed1d ]--- Kernel panic - not syncing: Fatal exception Problem is that slub_debug option is not parsed before create_boot_cache is called. Solve this by changing slub_debug to early_param. Kernels 3.11, 3.10 are also affected. I am not sure about older kernels. Christoph Lameter explains: kmem_cache_flags may be called with NULL parameter during early boot. Skip the test in that case. Reported-by: Andreas Herrmann <[email protected]> Signed-off-by: Christoph Lameter <[email protected]> Signed-off-by: Pekka Enberg <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a6b31d1 upstream. The following scenario can cause silent data corruption when doing NFS writes. It has mainly been observed when doing database writes using O_DIRECT. 1) The RPC client uses sendpage() to do zero-copy of the page data. 2) Due to networking issues, the reply from the server is delayed, and so the RPC client times out. 3) The client issues a second sendpage of the page data as part of an RPC call retransmission. 4) The reply to the first transmission arrives from the server _before_ the client hardware has emptied the TCP socket send buffer. 5) After processing the reply, the RPC state machine rules that the call to be done, and triggers the completion callbacks. 6) The application notices the RPC call is done, and reuses the pages to store something else (e.g. a new write). 7) The client NIC drains the TCP socket send buffer. Since the page data has now changed, it reads a corrupted version of the initial RPC call, and puts it on the wire. This patch fixes the problem in the following manner: The ordering guarantees of TCP ensure that when the server sends a reply, then we know that the _first_ transmission has completed. Using zero-copy in that situation is therefore safe. If a time out occurs, we then send the retransmission using sendmsg() (i.e. no zero-copy), We then know that the socket contains a full copy of the data, and so it will retransmit a faithful reproduction even if the RPC call completes, and the application reuses the O_DIRECT buffer in the meantime. Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4bff720 upstream. The flow may reach the err label without freeing cl and cl_info cl and cl_info weren't assigned to ndev->cl and cl_info so they weren't freed in mei_nfc_free called on error path Cc: Samuel Ortiz <[email protected]> Signed-off-by: Tomas Winkler <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e92aee3 upstream. This patch adds the Port Reset Change flag to the set of bits that are preemptively cleared on init/resume of a hub. In theory this bit should never be set unexpectedly... in practice it can still happen if BIOS, SMM or ACPI code plays around with USB devices without cleaning up correctly. This is especially dangerous for XHCI root hubs, which don't generate any more Port Status Change Events until all change bits are cleared, so this is a good precaution to have (similar to how it's already done for the Warm Port Reset Change flag). Signed-off-by: Julius Werner <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 36165fd upstream. Polling TX statuses too frequently has two negative effects. First is randomly peek CPU usage, causing overall system functioning delays. Second bad effect is that device is not able to fill TX statuses in H/W register on some workloads and we get lot of timeouts like below: ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping This not only cause flood of messages in dmesg, but also bad throughput, since rate scaling algorithm can not work optimally. In the future, we should probably make polling interval be adjusted automatically, but for now just increase values, this make mentioned problems gone. Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=62781 Signed-off-by: Stanislaw Gruszka <[email protected]> Signed-off-by: John W. Linville <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4560e7c upstream. Use the ACCESS_ONCE macro for both accesses to idle->sequence in the loops to calculate the idle time. If only one access uses the macro, the compiler is free to cache the value for the second access which can cause endless loops. Signed-off-by: Martin Schwidefsky <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 76ae281 upstream. A race window in configfs, it starts from one dentry is UNHASHED and end before configfs_d_iput is called. In this window, if a lookup happen, since the original dentry was UNHASHED, so a new dentry will be allocated, and then in configfs_attach_attr(), sd->s_dentry will be updated to the new dentry. Then in configfs_d_iput(), BUG_ON(sd->s_dentry != dentry) will be triggered and system panic. sys_open: sys_close: ... fput dput dentry_kill __d_drop <--- dentry unhashed here, but sd->dentry still point to this dentry. lookup_real configfs_lookup configfs_attach_attr---> update sd->s_dentry to new allocated dentry here. d_kill configfs_d_iput <--- BUG_ON(sd->s_dentry != dentry) triggered here. To fix it, change configfs_d_iput to not update sd->s_dentry if sd->s_count > 2, that means there are another dentry is using the sd beside the one that is going to be put. Use configfs_dirent_lock in configfs_attach_attr to sync with configfs_d_iput. With the following steps, you can reproduce the bug. 1. enable ocfs2, this will mount configfs at /sys/kernel/config and fill configure in it. 2. run the following script. while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done & while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done & Signed-off-by: Junxiao Bi <[email protected]> Cc: Joel Becker <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 72a0c55 upstream. On cris arch, the functions below aren't defined: drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_read': drivers/media/platform/sh_veu.c:228:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_write': drivers/media/platform/sh_veu.c:234:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read': drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write': drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read': drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write': drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_setup': drivers/media/platform/soc_camera/rcar_vin.c:284:3: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_request_capture_stop': drivers/media/platform/soc_camera/rcar_vin.c:353:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] Yet, they're available, as CONFIG_GENERIC_IOMAP is defined. What happens is that asm/io.h was not including asm-generic/iomap.h. Suggested-by: Ben Hutchings <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: Jesper Nilsson <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5017b28 upstream. dmi_match() considers a substring match to be a successful match. This is not always sufficient to distinguish between DMI data for different systems. Add support for exact string matching using strcmp() in addition to the substring matching using strstr(). The specific use case in the i915 driver is to allow us to use an exact match for D510MO, without also incorrectly matching D510MOV: { .ident = "Intel D510MO", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), DMI_EXACT_MATCH(DMI_BOARD_NAME, "D510MO"), }, } Signed-off-by: Jani Nikula <[email protected]> Cc: <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Cornel Panceac <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e5614f0 upstream. This replaceable mainboard only has a VGA-out, yet it claims to also have a connected LVDS header. Addresses https://bugs.freedesktop.org/show_bug.cgi?id=63860 [[email protected]: use DMI_EXACT_MATCH for board name.] Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Reported-by: <[email protected]> Cc: Cornel Panceac <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 645378d upstream. The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as having LVDS but the hardware is not populated. This patch adds them to the list of such systems. Patch is against 3.11.4 v2: Patch revised to match the D425KT exactly as the D425KTW does have LVDS. According to Intel's documentation, the D410PTL and D410PLTW don't. Signed-off-by: Rob Pearce <[email protected]> [danvet: Pimp commit message to my liking and add cc: stable.] Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Daniel Stone <[email protected]>
Signed-off-by: Daniel Stone <[email protected]>
- Supports raw YUV capture, preview, JPEG and H264. - Uses videobuf2 for data transfer, using dma_buf. - Uses 3.6.10 timestamping - Camera power based on use - Uses immutable input mode on video encoder Signed-off-by: Daniel Stone <[email protected]> Signed-off-by: Luke Diamand <[email protected]>
…(default is pin 4)
|
Closing. This is applied to very old rpi-patches branch. The other PR is better. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Patch implement runtime configuration option for setting GPIO pin like 1-Wire master device.
When use module you may use it on follow way :
modprobe w1-gpio (standard hard coded pin 4 will be used)
modprobe w1-gpio gpiopin=18 (pin 18 will be used for 1-Wire devices. Pin number need to be real pin number not pin position on GPIO interface)
More about issue may be found on http://www.raspberrypi.org/phpBB3/viewtopic.php?f=37&t=40044