Skip to content

Add RS485 mode support for UART2, UART3, UART4, and UART5. #6820

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 2 commits into from
Apr 28, 2025
Merged

Add RS485 mode support for UART2, UART3, UART4, and UART5. #6820

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
cf8b0d9
Add RS485 mode support for UART2, UART3, UART4, and UART5.
TheMightyMadman Apr 28, 2025
a0287d5
Modified potentially confusing documentation for rs485_invert_rts.
TheMightyMadman Apr 28, 2025
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
48 changes: 48 additions & 0 deletions arch/arm/boot/dts/overlays/README
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5181,6 +5181,18 @@ Name: uart2
Info: Enable uart 2 on GPIOs 0-3. BCM2711 only.
Load: dtoverlay=uart2,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off)
rs485 Enable RS485 mode for using the RTS line to
drive the OE pin of an RS485 transceiver (i.e.
MAX3078E); also enables the UARTx ctsrts
parameter, as RTS is required (default off).
rs485_invert_rts When RS485 mode is enabled, inverts the RTS
line from active-high (default) to active-low.
rs485_rts_on_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission starting
and the RTS line being asserted (default 0).
rs485_rts_off_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission ending
and the RTS line being deasserted (default 0).


Name: uart2-pi5
Expand All @@ -5193,6 +5205,18 @@ Name: uart3
Info: Enable uart 3 on GPIOs 4-7. BCM2711 only.
Load: dtoverlay=uart3,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off)
rs485 Enable RS485 mode for using the RTS line to
drive the OE pin of an RS485 transceiver (i.e.
MAX3078E); also enables the UARTx ctsrts
parameter, as RTS is required (default off).
rs485_invert_rts When RS485 mode is enabled, inverts the RTS
line from active-high (default) to active-low.
rs485_rts_on_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission starting
and the RTS line being asserted (default 0).
rs485_rts_off_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission ending
and the RTS line being deasserted (default 0).


Name: uart3-pi5
Expand All @@ -5205,6 +5229,18 @@ Name: uart4
Info: Enable uart 4 on GPIOs 8-11. BCM2711 only.
Load: dtoverlay=uart4,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off)
rs485 Enable RS485 mode for using the RTS line to
drive the OE pin of an RS485 transceiver (i.e.
MAX3078E); also enables the UARTx ctsrts
parameter, as RTS is required (default off).
rs485_invert_rts When RS485 mode is enabled, inverts the RTS
line from active-high (default) to active-low.
rs485_rts_on_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission starting
and the RTS line being asserted (default 0).
rs485_rts_off_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission ending
and the RTS line being deasserted (default 0).


Name: uart4-pi5
Expand All @@ -5217,6 +5253,18 @@ Name: uart5
Info: Enable uart 5 on GPIOs 12-15. BCM2711 only.
Load: dtoverlay=uart5,<param>
Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off)
rs485 Enable RS485 mode for using the RTS line to
drive the OE pin of an RS485 transceiver (i.e.
MAX3078E); also enables the UARTx ctsrts
parameter, as RTS is required (default off).
rs485_invert_rts When RS485 mode is enabled, inverts the RTS
line from active-high (default) to active-low.
rs485_rts_on_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission starting
and the RTS line being asserted (default 0).
rs485_rts_off_delay When RS485 mode is enabled, sets the delay (in
milliseconds) between data transmission ending
and the RTS line being deasserted (default 0).


Name: udrc
Expand Down
12 changes: 12 additions & 0 deletions arch/arm/boot/dts/overlays/uart2-overlay.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -19,7 +19,19 @@
};
};

rs485: fragment@2 {
target = <&uart2>;
__dormant__ {
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
};

__overrides__ {
ctsrts = <0>,"=1";
rs485 = <0>,"=1=2";
rs485_invert_rts = <&rs485>,"rs485-rts-active-low";
rs485_rts_on_delay = <&rs485>, "rs485-rts-delay:0";
rs485_rts_off_delay = <&rs485>, "rs485-rts-delay:4";
};
};
12 changes: 12 additions & 0 deletions arch/arm/boot/dts/overlays/uart3-overlay.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -19,7 +19,19 @@
};
};

rs485: fragment@2 {
target = <&uart3>;
__dormant__ {
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
};

__overrides__ {
ctsrts = <0>,"=1";
rs485 = <0>,"=1=2";
rs485_invert_rts = <&rs485>,"rs485-rts-active-low";
rs485_rts_on_delay = <&rs485>, "rs485-rts-delay:0";
rs485_rts_off_delay = <&rs485>, "rs485-rts-delay:4";
};
};
12 changes: 12 additions & 0 deletions arch/arm/boot/dts/overlays/uart4-overlay.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -19,7 +19,19 @@
};
};

rs485: fragment@2 {
target = <&uart4>;
__dormant__ {
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
};

__overrides__ {
ctsrts = <0>,"=1";
rs485 = <0>,"=1=2";
rs485_invert_rts = <&rs485>,"rs485-rts-active-low";
rs485_rts_on_delay = <&rs485>, "rs485-rts-delay:0";
rs485_rts_off_delay = <&rs485>, "rs485-rts-delay:4";
};
};
12 changes: 12 additions & 0 deletions arch/arm/boot/dts/overlays/uart5-overlay.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -19,7 +19,19 @@
};
};

rs485: fragment@2 {
target = <&uart5>;
__dormant__ {
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 0>;
};
};

__overrides__ {
ctsrts = <0>,"=1";
rs485 = <0>,"=1=2";
rs485_invert_rts = <&rs485>,"rs485-rts-active-low";
rs485_rts_on_delay = <&rs485>, "rs485-rts-delay:0";
rs485_rts_off_delay = <&rs485>, "rs485-rts-delay:4";
};
};
Loading