Enable NFSv4 with Kerberos #706
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
@popcornmix Was there a reason that pull request #233 was never accepted? This change is fairly low-impact, it should only cause 2 extra in-tree modules to be built, and shouldn't have any effect on users if they don't make use of the modules. |
|
As far as I can tell the only missing option is CONFIG_CRYPTO_CTS=m. Will add that in next build. |
popcornmix
force-pushed
the
rpi-3.12.y
branch
from
69c67f0 to
b518a2d
Compare
popcornmix
added a commit
to raspberrypi/firmware
that referenced
this pull request
Oct 12, 2014
See: raspberrypi/linux#706 kernel: config: Support ATM modules for USB ADSL modem support See: raspberrypi/linux#543 kernel: lirc_rpi: Add parameter to specify input pin pull See: raspberrypi/linux#665 kernel: vchiq: Move logging control into debugfs firmware: audio_mixer: Add more support for 24-bit formats See: http://forum.xbmc.org/showthread.php?tid=206262 firmware: audioplus: Always use 48kHz for pwm when de-popping is enabled See: #324 firmware: platform: Reorganise so config.txt is parsed before gpioman is set up firmware: config: Remove gpio_pads config. Drive strength can be set through gpioman firmware: audio_mixer: Check port number with resample parameter
popcornmix
added a commit
to Hexxeh/rpi-firmware
that referenced
this pull request
Oct 12, 2014
See: raspberrypi/linux#706 kernel: config: Support ATM modules for USB ADSL modem support See: raspberrypi/linux#543 kernel: lirc_rpi: Add parameter to specify input pin pull See: raspberrypi/linux#665 kernel: vchiq: Move logging control into debugfs firmware: audio_mixer: Add more support for 24-bit formats See: http://forum.xbmc.org/showthread.php?tid=206262 firmware: audioplus: Always use 48kHz for pwm when de-popping is enabled See: raspberrypi/firmware#324 firmware: platform: Reorganise so config.txt is parsed before gpioman is set up firmware: config: Remove gpio_pads config. Drive strength can be set through gpioman firmware: audio_mixer: Check port number with resample parameter
|
CONFIG_CRYPTO_CTS is added in last firmware update. |
|
I just updated my firmware with rpi-update, and it looks like all the config is correct and modules built; thanks @popcornmix. |
neuschaefer
pushed a commit
to neuschaefer/raspi-binary-firmware
that referenced
this pull request
Feb 27, 2017
See: raspberrypi/linux#706 kernel: config: Support ATM modules for USB ADSL modem support See: raspberrypi/linux#543 kernel: lirc_rpi: Add parameter to specify input pin pull See: raspberrypi/linux#665 kernel: vchiq: Move logging control into debugfs firmware: audio_mixer: Add more support for 24-bit formats See: http://forum.xbmc.org/showthread.php?tid=206262 firmware: audioplus: Always use 48kHz for pwm when de-popping is enabled See: raspberrypi#324 firmware: platform: Reorganise so config.txt is parsed before gpioman is set up firmware: config: Remove gpio_pads config. Drive strength can be set through gpioman firmware: audio_mixer: Check port number with resample parameter
popcornmix
pushed a commit
that referenced
this pull request
Jan 28, 2022
commit 0c031fd upstream. bioset acct is only needed for raid0 and raid5. Therefore, md_run only allocates it for raid0 and raid5. However, this does not cover personality takeover, which may cause uninitialized bioset. For example, the following repro steps: mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1 mdadm --wait /dev/md0 mkfs.xfs /dev/md0 mdadm /dev/md0 --grow -l5 mount /dev/md0 /mnt causes panic like: [ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 225.934903] #PF: supervisor instruction fetch in kernel mode [ 225.935639] #PF: error_code(0x0010) - not-present page [ 225.936361] PGD 0 P4D 0 [ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706 [ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014 [ 225.939922] RIP: 0010:0x0 [ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246 [ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39 [ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800 [ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01 [ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58 [ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040 [ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000 [ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0 [ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 225.951414] Call Trace: [ 225.951787] <TASK> [ 225.952120] mempool_alloc+0xe5/0x250 [ 225.952625] ? mempool_resize+0x370/0x370 [ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.954464] ? sched_clock_cpu+0x15/0x120 [ 225.955019] ? find_held_lock+0xac/0xd0 [ 225.955564] bio_alloc_bioset+0x1ed/0x2a0 [ 225.956080] ? lock_downgrade+0x3a0/0x3a0 [ 225.956644] ? bvec_alloc+0xc0/0xc0 [ 225.957135] bio_clone_fast+0x19/0x80 [ 225.957651] raid5_make_request+0x1370/0x1b70 [ 225.958286] ? sched_clock_cpu+0x15/0x120 [ 225.958797] ? __lock_acquire+0x8b2/0x3510 [ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0 [ 225.959986] ? lock_is_held_type+0xd8/0x130 [ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.961703] ? sched_clock_cpu+0x15/0x120 [ 225.962232] ? lock_release+0x27a/0x6c0 [ 225.962746] ? do_wait_intr_irq+0x130/0x130 [ 225.963302] ? lock_downgrade+0x3a0/0x3a0 [ 225.963815] ? lock_release+0x6c0/0x6c0 [ 225.964348] md_handle_request+0x342/0x530 [ 225.964888] ? set_in_sync+0x170/0x170 [ 225.965397] ? blk_queue_split+0x133/0x150 [ 225.965988] ? __blk_queue_split+0x8b0/0x8b0 [ 225.966524] ? submit_bio_checks+0x3b2/0x9d0 [ 225.967069] md_submit_bio+0x127/0x1c0 [...] Fix this by moving alloc/free of acct bioset to pers->run and pers->free. While we are on this, properly handle md_integrity_register() error in raid0_run(). Fixes: daee202 (md: check level before create and exit io_acct_set) Cc: [email protected] Acked-by: Guoqing Jiang <[email protected]> Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 28, 2022
commit 0c031fd upstream. bioset acct is only needed for raid0 and raid5. Therefore, md_run only allocates it for raid0 and raid5. However, this does not cover personality takeover, which may cause uninitialized bioset. For example, the following repro steps: mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1 mdadm --wait /dev/md0 mkfs.xfs /dev/md0 mdadm /dev/md0 --grow -l5 mount /dev/md0 /mnt causes panic like: [ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 225.934903] #PF: supervisor instruction fetch in kernel mode [ 225.935639] #PF: error_code(0x0010) - not-present page [ 225.936361] PGD 0 P4D 0 [ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706 [ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014 [ 225.939922] RIP: 0010:0x0 [ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246 [ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39 [ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800 [ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01 [ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58 [ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040 [ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000 [ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0 [ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 225.951414] Call Trace: [ 225.951787] <TASK> [ 225.952120] mempool_alloc+0xe5/0x250 [ 225.952625] ? mempool_resize+0x370/0x370 [ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.954464] ? sched_clock_cpu+0x15/0x120 [ 225.955019] ? find_held_lock+0xac/0xd0 [ 225.955564] bio_alloc_bioset+0x1ed/0x2a0 [ 225.956080] ? lock_downgrade+0x3a0/0x3a0 [ 225.956644] ? bvec_alloc+0xc0/0xc0 [ 225.957135] bio_clone_fast+0x19/0x80 [ 225.957651] raid5_make_request+0x1370/0x1b70 [ 225.958286] ? sched_clock_cpu+0x15/0x120 [ 225.958797] ? __lock_acquire+0x8b2/0x3510 [ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0 [ 225.959986] ? lock_is_held_type+0xd8/0x130 [ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.961703] ? sched_clock_cpu+0x15/0x120 [ 225.962232] ? lock_release+0x27a/0x6c0 [ 225.962746] ? do_wait_intr_irq+0x130/0x130 [ 225.963302] ? lock_downgrade+0x3a0/0x3a0 [ 225.963815] ? lock_release+0x6c0/0x6c0 [ 225.964348] md_handle_request+0x342/0x530 [ 225.964888] ? set_in_sync+0x170/0x170 [ 225.965397] ? blk_queue_split+0x133/0x150 [ 225.965988] ? __blk_queue_split+0x8b0/0x8b0 [ 225.966524] ? submit_bio_checks+0x3b2/0x9d0 [ 225.967069] md_submit_bio+0x127/0x1c0 [...] Fix this by moving alloc/free of acct bioset to pers->run and pers->free. While we are on this, properly handle md_integrity_register() error in raid0_run(). Fixes: daee202 (md: check level before create and exit io_acct_set) Cc: [email protected] Acked-by: Guoqing Jiang <[email protected]> Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
whdgmawkd
pushed a commit
to whdgmawkd/linux
that referenced
this pull request
Feb 11, 2022
commit 0c031fd upstream. bioset acct is only needed for raid0 and raid5. Therefore, md_run only allocates it for raid0 and raid5. However, this does not cover personality takeover, which may cause uninitialized bioset. For example, the following repro steps: mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1 mdadm --wait /dev/md0 mkfs.xfs /dev/md0 mdadm /dev/md0 --grow -l5 mount /dev/md0 /mnt causes panic like: [ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 225.934903] #PF: supervisor instruction fetch in kernel mode [ 225.935639] #PF: error_code(0x0010) - not-present page [ 225.936361] PGD 0 P4D 0 [ 225.936677] Oops: 0010 [raspberrypi#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ raspberrypi#706 [ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014 [ 225.939922] RIP: 0010:0x0 [ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246 [ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39 [ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800 [ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01 [ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58 [ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040 [ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000 [ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0 [ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 225.951414] Call Trace: [ 225.951787] <TASK> [ 225.952120] mempool_alloc+0xe5/0x250 [ 225.952625] ? mempool_resize+0x370/0x370 [ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.954464] ? sched_clock_cpu+0x15/0x120 [ 225.955019] ? find_held_lock+0xac/0xd0 [ 225.955564] bio_alloc_bioset+0x1ed/0x2a0 [ 225.956080] ? lock_downgrade+0x3a0/0x3a0 [ 225.956644] ? bvec_alloc+0xc0/0xc0 [ 225.957135] bio_clone_fast+0x19/0x80 [ 225.957651] raid5_make_request+0x1370/0x1b70 [ 225.958286] ? sched_clock_cpu+0x15/0x120 [ 225.958797] ? __lock_acquire+0x8b2/0x3510 [ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0 [ 225.959986] ? lock_is_held_type+0xd8/0x130 [ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 225.961703] ? sched_clock_cpu+0x15/0x120 [ 225.962232] ? lock_release+0x27a/0x6c0 [ 225.962746] ? do_wait_intr_irq+0x130/0x130 [ 225.963302] ? lock_downgrade+0x3a0/0x3a0 [ 225.963815] ? lock_release+0x6c0/0x6c0 [ 225.964348] md_handle_request+0x342/0x530 [ 225.964888] ? set_in_sync+0x170/0x170 [ 225.965397] ? blk_queue_split+0x133/0x150 [ 225.965988] ? __blk_queue_split+0x8b0/0x8b0 [ 225.966524] ? submit_bio_checks+0x3b2/0x9d0 [ 225.967069] md_submit_bio+0x127/0x1c0 [...] Fix this by moving alloc/free of acct bioset to pers->run and pers->free. While we are on this, properly handle md_integrity_register() error in raid0_run(). Fixes: daee202 (md: check level before create and exit io_acct_set) Cc: [email protected] Acked-by: Guoqing Jiang <[email protected]> Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
pfpacket
pushed a commit
to pfpacket/linux-rpi-rust
that referenced
this pull request
Apr 7, 2023
Target specification cleanup
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Building these modules allows use of NFSv4 with Kerberos. (This is the same change as #233 but updated to the current branch.)