ARM64: Make it work again on 4.9 #1790
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Okay by me. @pelwell ? |
pelwell
reviewed
Jan 12, 2017
| dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb | ||
| dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb | ||
| dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb | ||
| dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb | ||
| dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb | ||
|
|
||
| always := $(dtb-y) | ||
| subdir-y := $(dts-dirs) |
There was a problem hiding this comment.
From what I have found, the clean rules are applied without regard for the configuration. This makes sense, since when you are changing configuration you want the old configuration to be cleaned, not the new one. Because overlays is only added to dts-dirs when ARCH_BCM2835 is set, this means that the .dtb files are never deleted.
arch/arm/boot/dts/Makefile has the following:
subdir-y := overlays
clean-files := *.dtb
I think you need at least the subdir-y change (albeit with ../overlays), and perhaps clean-files as well.
Invoke the dtc compiler with the same options used in arm mode. Signed-off-by: Michael Zoran <[email protected]>
ARM64 now uses the bcm2835 platform just like ARM32. Signed-off-by: Michael Zoran <[email protected]>
Signed-off-by: Michael Zoran <[email protected]>
Electron752
force-pushed
the
rpi-4.9.y+rpi364
branch
from
5306434 to
025bf00
Compare
|
OK, I moved this out from the conditional in the arch/arm64/boot/dts/broadcom/Makefile: This should allow it to visit the overlays directory unconditionally. I did a quick confirm that overlays are building correctly and the make clean is deleting the overlays as well. I forced a new update. |
|
Yes, that's better. Merged. |
|
Wow, that was pretty fast. |
|
I just tested it to build locally, but I got no |
|
I'm looking at https://github.com/raspberrypi/linux/tree/rpi-4.9.y/arch/arm64/boot/dts and I can see the overlays folder at the end of the page. The overlays folder is just a symbolic link to arch/arm/boot/dts/overlays. The built overlays should be in that folder after building. I doubt this is the problem, but some file systems like FAT or NTFS don't support symbolic links. |
|
In my build script I'm using the make flag |
|
Last time I looked at overlays on arm64 I found that they were being installed inside a 'broadcom' directory - perhaps that is the case for you. I didn't find a solution at the time, but adding overlays to subdirs-y in arch/arm64/boot/dts/Makefile (instead of ../overlays in arch/arm64/boot/dts/Makefile) might fix it. |
|
I usually just manually copy the device tree and overlays files. That seems to work for me. I just tested running: What happens is the standard device tree is installed in dtbs/broadcom and the overlays are installed in dtbs/overlays. It might be possible to fix the broadcom directory issue, but that's the way the upstream kernel works so perhaps it makes sense here as well. |
|
I also tried running(Note the O= part): make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- INSTALL_DTBS_PATH=dtbs -j8 O=build/rpi364 dtbs I am indeed seeing the overlays in build/rpi364/arch/arm64/boot/dts/overlays. So at least for me, it seems to be working. |
popcornmix
pushed a commit
that referenced
this pull request
Jan 13, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 13, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 16, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 18, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 21, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 23, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 30, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jan 30, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Feb 1, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Feb 4, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Feb 6, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Feb 10, 2017
* Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jun 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 10, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 10, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 12, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
TiejunChina
pushed a commit
that referenced
this pull request
Jun 19, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64
popcornmix
pushed a commit
that referenced
this pull request
Jun 21, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 21, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 1, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 1, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 8, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 12, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 15, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 16, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
pelwell
pushed a commit
that referenced
this pull request
Jul 19, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
TiejunChina
pushed a commit
that referenced
this pull request
Jul 23, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64
popcornmix
pushed a commit
that referenced
this pull request
Jul 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 31, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 31, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 5, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 15, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 28, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 30, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Sep 6, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Sep 17, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Oct 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Oct 11, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Here are the changes that have been made:
Correctly build overlays for arm64. I have tested this with the official RPI touchscreen and can see that the overlay for the touchscreen is automatically loaded by the firmware and I can use the touchscreen.
Remove the bcm2709 platform for good.
Update the bcmrpi3_defconfig to work with 4.9.