This commit adds support for RP3-B-Plus in in arch arm64 #2464
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…e the ethernet work on RPI3-B-Plus on 64bit
pelwell
reviewed
Mar 24, 2018
…copy of the arch arm file
|
@pelwell thx. here is the change to symlink |
pelwell
pushed a commit
that referenced
this pull request
Mar 25, 2018
pelwell
pushed a commit
that referenced
this pull request
Mar 25, 2018
pelwell
pushed a commit
that referenced
this pull request
Mar 25, 2018
popcornmix
pushed a commit
that referenced
this pull request
Mar 26, 2018
popcornmix
pushed a commit
that referenced
this pull request
Mar 26, 2018
ED6E0F17
pushed a commit
to ED6E0F17/linux
that referenced
this pull request
Mar 26, 2018
nathanchance
added a commit
to nathanchance/pi-kernel
that referenced
this pull request
Mar 28, 2018
* upstream/rpi-4.14.y: lan78xx: Simple patch to prevent some crashes lan78xx: Ignore DT MAC address if already valid Add overlay for Semtech SX150X I2C GPIO Expanders This commit adds support for RP3-B-Plus in in arch arm64 (raspberrypi#2464) Signed-off-by: Nathan Chancellor <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Mar 29, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 3, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 3, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 9, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 9, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 16, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 16, 2018
popcornmix
pushed a commit
that referenced
this pull request
Apr 26, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 5, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 5, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 17, 2018
pelwell
pushed a commit
that referenced
this pull request
May 20, 2018
pelwell
pushed a commit
that referenced
this pull request
May 20, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 21, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 25, 2018
popcornmix
pushed a commit
that referenced
this pull request
May 29, 2018
popcornmix
pushed a commit
that referenced
this pull request
Jun 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 10, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 10, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 12, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
TiejunChina
pushed a commit
that referenced
this pull request
Jun 19, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64
popcornmix
pushed a commit
that referenced
this pull request
Jun 21, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 21, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jun 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 1, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 1, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 8, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 12, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 15, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 16, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
pelwell
pushed a commit
that referenced
this pull request
Jul 19, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
TiejunChina
pushed a commit
that referenced
this pull request
Jul 23, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64
popcornmix
pushed a commit
that referenced
this pull request
Jul 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 25, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 31, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Jul 31, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 5, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 15, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 28, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Aug 30, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Sep 6, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Sep 17, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Oct 4, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
popcornmix
pushed a commit
that referenced
this pull request
Oct 11, 2019
…835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment. ARM64: Modify default config to get raspbian to boot (#1686) 1. Enable emulation of deprecated instructions. 2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. 3. Switch the default governer to powersave. 4. Include the watchdog timer driver in the kernel image rather then a module. Tested with raspbian-jessie 2016-09-23. ARM64: Make it work again on 4.9 (#1790) * Invoke the dtc compiler with the same options used in arm mode. * ARM64 now uses the bcm2835 platform just like ARM32. * ARM64: Update bcmrpi3_defconfig Signed-off-by: Michael Zoran <[email protected]> Update arm64 Makefile to compile bcm2710 dtb file The line 'dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb' has been copied from previous rpi-4.14.y version into rpi-4.15.y arch/arm64/boot/dts/broadcom/Makefile to restore compilation of bcm2710-rpi-3-b.dtb device tree blob under 'make ARCH=arm64 dtbs' command. arm64: enable thermal / enable mmc (#2425) This commit adds support for RP3-B-Plus in in arch arm64 (#2464) Enable AES, AES bit slice, and AES NEON engines on arm64 Enable bbr module for arm64 devicetree: add RPi CM3 dts to arm64; mimic the RPi 3B arm64 dts implementation, by referring to the actual dts file in the arm directory
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I hope this is the right place for the pull request. This probably also needs to be done in newer kernel version. Please let me know if i should submit it somewhere else.