ARM: dts: vc4-kms-v3d: Always disable firmware HDMI #4652
Merged
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Both the firmware audio driver and the vc4-kms-v3d driver are capable
of providing HDMI audio, but only one should be active at any time.
The vc4-kms-v3d overlays disable the firmware audio driver, but they
also have a noaudio parameter that as well as disabling the ARM-side
HDMI audio also re-enables the firmware HDMI audio. This is not
guaranteed to work and has been seen to break the display completely.
Modify the noaudio parameters so that the firmware HDMI audio support
remains disabled.
See: #4651
Signed-off-by: Phil Elwell [email protected]